This is my favourite pedalboard design. Absolutely amazing. I was so inspired by it, I have created my own from kwila and pine. Outstanding work mate.

This was truly amazing to watch. You sir, are awesome.

@TheOffcut

7 жыл бұрын

And you are too kind!

Thats not a pedalboard. Thats a work of art! So beautiful man. Absolutely stunning...

Simply beautiful! Thanks for sharing

@TheOffcut

2 жыл бұрын

Thanks!

Gorgeous, very well done!

Its so pretty I wouldn't want to step on it!

Your pedalboard is incredible, congratulations !!!

Wonderfull job! I’d stay lot of hours here seeing it!

I know I'm late to the party and you may never see this, but beautiful work! I'm contemplating a board build out of Black Walnut, and am scarfing up anything I can find on pedalboard building. Thanks for the video, I thoroughly enjoyed it.

@TheOffcut

4 ай бұрын

Never too late! All the best for your build! Thanks for the comment!

Spectacular!!! I want one.

THIS IS AN ARMORED PEDALBOARD, STATE OF THE ART.... EXCELLENT..!!!

Dude, this is beautiful!!!

Very nice. The use of the sled for the angled cuts and the slots for the cross boards has been what I’ve tried to figure out how to do. Nice work with the dowels for the joints too 👌🏻

very well built, that will not fall apart!!!

Beautiful design 👍

I agree. Nice design and build.

nice contrast between the red and the white,good craftsmanship too!

Perfection!

Wowww...very, very nice work! 👏👏👏👏👏👏😎

Juicy pedalboard ! like for lo-fi radio !

Dang that came out clean! very nice!

Wow! Inspired me to make my own!

Massive respect for listening to Kings of Leon. Whether that was just the radio or you playing it. Lol. Great work

Beautiful

Nicely done sir and gorgeous choice of woods.. :)

Great job! Great channel! I love it

Perfect!!!

Great job!

Is that Jazz Vibes playlist? Good job man!

Looks great. Nice work! 🤓🤘

Congratulations Bro... Very, Very good This pedalboard, I'm Brazil, good job man!

nice work!

Nicely done.

Its so satisfying I wish I had the tools to do stuff like this

@Felipera_

6 жыл бұрын

You can probably do this with less than 50 bucks in tools. Even less if you already own the basic ones like a hand saw and a drill. As I see all I really need is a hand saw, a chisel, a hammer and some sandpaper.

@djay6651

5 жыл бұрын

Yup, it will just take longer. I built a book shelf out of pine with a jigsaw, a couple of chisels, a simple right angle square and a 4 oz claw hammer.

Damn, this is gorgeous man. Well done.

@TheOffcut

4 жыл бұрын

Thank you!

I built one similar to this - never really cared about how it looked so mine is a lot more quick & dirty - but it's the same slanted, horizontal board design. It's great, but if you want to attach your pedals with zipties you should install vertical straps of some kind, otherwise zipties don't really work unless you drill holes or something. That's the one improvement that I would suggest to this design (and that I will add next time I make one).

beautiful

@jonniefast

Жыл бұрын

my plan is repurpose an old briefcase 😅

Craftsmanship on fire

Awesome

The farther away the better, cool.

Nice job, its like a work of art and i would almost not want to put pedals on it because it looks so beautiful..

So much beautiful

Just... wow. The craftsmanship, the attention to detail... That is beautiful work. Looking to start doing this myself, what advice can you give me?

@TheOffcut

7 жыл бұрын

Livingthat Twelvelife thank you! I'd say take your time to plan each step to make sure you get everything right and don't make the wrong cut

@goodboyringo9716

6 жыл бұрын

advice... get busy

@robertcolmorgen2467

5 жыл бұрын

Ryobi commercial

Excelent!

Came here to research ideas for building a pedalboard, I’m now officially quitting music and taking up woodworking......amazing craftsmanship, awesome video!

@TheOffcut

3 жыл бұрын

haha I'm sure you can do both! Thanks for the comment :D

Very Nice 👍🏻

Pedalboard di lusso! 😀

I'm sure the mahogany and ash wood will improve the guitar tone! lol! Seriously, great work!

Topppp....... muito showwwww...

trabalho perfeito

nossa ficou top

Looks awesome, man!! Would love to see how it looks with the pedals on it and how you attached them. Great work!

@TheOffcut

6 жыл бұрын

Thanks! Sadly I didn't get any shots with the pedals on it as I made it for a friend who picked it up once it was finished.

😍😍😍

Nice build. Ryobi should sponsor you😏

Muito lindo

Aight. I'ma try to build something like that.

Top

nice

I am inspired by your work lol. Would you mind telling me what angle of elevation you used to get that slope?

That looks amazing I need one..

@TheOffcut

6 жыл бұрын

Thank you! I do make these to sell :)

incredible. do you have the measurements / plans for this ? what are the dimensions ? i have a friend who wants one, i'm going to try to make him one. thanks

Awesome work! Why do you not use a dado blade?

cool project! what a strange way to place the step stool btw ahahha

@TheOffcut

7 жыл бұрын

It is?? Whats wrong with it?? haha

Great pedalboard man. Definately one of the slickest builds on yt. Is there any chance you could provide me with rough dimensions for the pedalboard?

Beautiful! This is perhaps the best one I’ve seen of the DIY pedalboards. What angle did you use for the rise?

@rafalshemist

Жыл бұрын

Probably 28°

excelente trabajo bro, tienes las medidas de la madera?

much too nice to put on the floor at a pub gig!

That is a fine looking pedalboard!

@TheOffcut

6 жыл бұрын

Matthew Cain thank you!

So, no jointing at all? Lately I've seen slot of woodworkers just throw lumber thru the planer without jointing first. I'm asking because I'm debating whether I really need to buy one or not.

Just made one roughly the same size in mahogany, I’d be interested to see your solution to routing the cables.

@TheOffcut

6 жыл бұрын

Nice! I made this for a friend so I didn't see how he fed the cables through it.

😍👍🏻😍😍😍😍😍

What miter saw are you using? Thanks for another great video.

@TheOffcut

7 жыл бұрын

Its a Toolshed miter saw. NZ brand

Looks sharp, but how do you fix each pedal on that? I would hate to see you sticking velcros onto that...

Hi! Could you share the plans in the description? I went to "Get my Plans", but it was not there. Thanks!!

What an art! Do you do special orders?

Impressive! Glad I clicked on this and watched. Where did you get the rubber feet for the corners and handle from? Nice little detailed touch. Thanks for sharing

@TheOffcut

6 жыл бұрын

Thanks! I found it at a local DIY/electronics store. But I'm sure you can find them on aliexpress

please show us what kind of gear ended up on it, i wanna see the pedalboard design and layout (i'm a gear nerd)

A beatiful work of art for sure. However, a minor criticism: that looks a bit heavy and excessively sturdy. That's not something you perhaps like to carry around small gigs all the time, at least for me. I'd probably build one from plywood, aluminum and quality veneer. Just my 2 cents. Anyway, great work, keep it up.

@graysonadams2485

6 жыл бұрын

No such thing as too sturdy :)

@iainmcguire7190

4 жыл бұрын

@@felix.delrubio Of course it does. Mount the power supply under the board, cables go through the gaps between the slats.

What size is the pedalboard?

I want to order exactly that one; How much? and I need that shipped to Mexico... I'm serious.

Welcome back...;-p

@TheOffcut

7 жыл бұрын

good to be back! :)

wow so beautiful. but so i think its so heavy

So I’m curious, I don’t see you jointing anything just using the planer. Did you buy that s4s already?

How much practice before i can move that fast?

@TheOffcut

7 жыл бұрын

haha just record yourself and speed up the video. then you'll be moving fast

做的不错，工具比我的全。

Love this! Have been trying to do something very similar. One question: why did you not feel the need to fasten the cross pieces with anything other than glue? Trying to decide if I should do something to make sure they are secure in place

@TheOffcut

Жыл бұрын

Thanks! Glue is more than enough to hold it together and it looks cleaner without any fasteners

Love the pedalboard. Any chance you could let me know the basic dimensions u used?

@TheOffcut

7 жыл бұрын

Thanks. It was 640 x 320mm

@ianandrew1496

7 жыл бұрын

Last Minute Thoughts awesome - bought wood today. Should be fun!

@yoan973

5 жыл бұрын

The Offcut hello sir! Very nice job. By the way you didn’t mention the thickness of each part. Around 1” or more?

How heavy would you say this wound up compared to a pedaltrain of roughly the same size? I'm really wanting to build my own but want to make sure it's worth it before I get started. Also great work man that's a beautiful board.

@strawboybeats3970

6 жыл бұрын

Also do you remember the dimensions of this board? Or how you decided on an angle?

@TheOffcut

6 жыл бұрын

Thanks man. I don’t know how heavy the pedal trains are but this one didn’t seem too heavy to be annoying to carry around. Dimensions were 640 x 320mm. I can’t remember how high it was or the angle, I just played around with it until I thought it looked good

what are the dimensions?

I'd love to see what you put on it! What's the music at 2:58?

@TheOffcut

6 жыл бұрын

Me too haha. I made it for a friend and I haven't actually had a good look at how he set it up. I think the music in the background is Kings of Leon? I could be wrong

May I have the draft about this?

Really nice job! IM me with your price. I'm about to go ahead with my plywood design unless you can talk me out of it.

How long does a project like this normally take?

@colbybryan7761

6 жыл бұрын

Jason Carlin I Built one and honestly it could be done in a day or maybe three depending on the glue and stain or whatever he coated it with

How do like the Ryobi table saw, looking to buy the same one would appreciate an opinion good , bad or otherwise.

@TheOffcut

7 жыл бұрын

David Larbey it's not bad, it's not great either. The fence has alignment issues and I always to have to re adjust it to make it parallel with the blade. But most table saws in this price range will have the same issue and will perform similarly I think.

@gromit9322

7 жыл бұрын

That's what I thought when I looked at in Bunnings might have pay more and get the Dewalt

What are his measurements? height, sides, front, back?

How many pedals can you put ok it? Could you write the measurement of the surface?

@TheOffcut

3 жыл бұрын

I think the measurement was 300mm x 600mm. Holds about 10 standard size pedals

Fwiw, with exotic and high oil timbers (walnut for american species), you really should be wearing breathing protection. Exotic woods can actually have non-visible spalting, and breathing that in can make you really sick. As well, many of those timbers are high irritants and can make you ill from that.

Does anyone know what size this one is?

@TheOffcut

3 жыл бұрын

it is 600 x 300mm

Dimensions??

@willhalvorson6118

5 жыл бұрын

640mm x 320mm, he wrote it in a comment awhile ago

measurements please