Caffè Crema guide to Mahlkoenig Vario K30 full cleaning and maintenance.
Жүктеу.....
Пікірлер: 11
@flagrantlyvivid71955 жыл бұрын
So much work for such small burrs. I'd go for the less hyped ceado e37s with 83 mm burrs and literally 3 screws to get into all this.
@lb68817 жыл бұрын
너무 감사드립니다~!!! 잘 보고 갑니다.
@mwdnasa8 жыл бұрын
Very nice video!
@vikingcoffeegear7 жыл бұрын
very awesome! thank you a lot!
@tgems19847 жыл бұрын
Thank you. Just one question if I may. At about 4.01 you say, (for bur installation), anticlockwise making sure its lined. Do I just make sure it is lined up to the two black marks that are there when you first open the machine? Will I make sure to add my own marks to it?
@vikingcoffeegear
7 жыл бұрын
Tom Gems I think you have to make sure it's lined so you don't damage the screw!
@tgems1984
7 жыл бұрын
Brilliant. Thank you so much it was a very informative and easy to follow video
@hitechespresso7 жыл бұрын
heard of a vacuum cleaner??
@towniebagels94293 жыл бұрын
so you jump ahead on putting motor back in. That is the not so fun part. not easy as it made to look
@chrisdodging
3 жыл бұрын
Motor screws on the bottom are the first thing i remove, before taking any of the upper side off, and then they are the last screws i put back in. as long as you line the motor up on its mounts its much easier this way
Пікірлер: 11
So much work for such small burrs. I'd go for the less hyped ceado e37s with 83 mm burrs and literally 3 screws to get into all this.
너무 감사드립니다~!!! 잘 보고 갑니다.
Very nice video!
very awesome! thank you a lot!
Thank you. Just one question if I may. At about 4.01 you say, (for bur installation), anticlockwise making sure its lined. Do I just make sure it is lined up to the two black marks that are there when you first open the machine? Will I make sure to add my own marks to it?
@vikingcoffeegear
7 жыл бұрын
Tom Gems I think you have to make sure it's lined so you don't damage the screw!
@tgems1984
7 жыл бұрын
Brilliant. Thank you so much it was a very informative and easy to follow video
heard of a vacuum cleaner??
so you jump ahead on putting motor back in. That is the not so fun part. not easy as it made to look
@chrisdodging
3 жыл бұрын
Motor screws on the bottom are the first thing i remove, before taking any of the upper side off, and then they are the last screws i put back in. as long as you line the motor up on its mounts its much easier this way