Greetings! Just a point of correction that, as some have commented below, there are now a few motherboards with PCIe 5.0 slots. My mistake. But it makes no difference to the content of this video.

@adamarmfield1069

8 ай бұрын

I think there are more pci 5 mobo's than there are pcie 5 ssd's

@pikkuraami

8 ай бұрын

@@adamarmfield1069 Yes, and there are practically no PCIe Gen5 expansion cards at all on the markets, yet. Support for PCIe Gen5 must start somewhere and motherboards are logical place to start. It gives some future proofing of a system aswell, like full datatransfer support for next gen GPUs.

@Darkk6969

8 ай бұрын

@@adamarmfield1069 Well it's been said that there's no real world difference between gen 4 and gen 5 in terms what we can tell other than running benchmarks which is why gen 5 is slow to be accepted out there and another reason is high cost. Later down the road gen 5 will be standard and prices will be reasonable to skip the gen 4.

@ExplainingComputers

8 ай бұрын

@@Darkk6969 I suspect that PCIe 5.0 will only become common for M.2 slots, not PCIe slots. Still today a lot of new motherboards have PCIe 3.0 slots only. :)

@TAP7a

8 ай бұрын

​@@Darkk6969gen 5 will have much higher bandwidth (twice as much) but when do you personally ever run a task that will tell the difference between running at 15,800Mbps and 7,900Mbps? We all noticed the difference between HDDs, SATA SSDs and NVMe SSDs because the decrease in *latency* was noticeable *and* the bandwidth of *random* read/write was therefore massively increased. This largely manifested in shorter boot times and quicker application loading (assuming they weren't being cached anyway), and now we're seeing some secondary benefits like streaming data directly to peripherals rather than via the CPU in situations like gaming. In the real world, latency for random IP is now sufficiently low relative to the size of applications and common bootloaders that we consumers won't notice the difference, because the perceivable difference between 10ms and 5ms is so much smaller than that between 20ms and 10ms, even though both are halving the latency. And that's being generous to the smaller values, as the latency decrease from PCIE 4.0 to 5.0 random IO is more like 20%

Most honest youtuber, nothing flashy and glittery, just explaining computer.

A lot more information in 1 video than dozens of videos from other so called techtubers.

Thanks for this video. You're one of the best, clearest and most comprehensible presenters on the web. Keep up the good work, Chris.

@CreamPolo

6 ай бұрын

100% agreed, pure info no nonsense

On holiday in Cyprus. KZread notification. Sunshine, Pool, beer & the new EC video. A perfect Sunday

@ExplainingComputers

8 ай бұрын

Enjoy your holiday! :)

One of my favorite computer related channels! Simple and straight forward.

This video couldn't have come at a better time for me. I was just looking into getting one and confused by the variety available. Thank you for yet another helpful and educational video!

i love how my google algorithm is, this was the first to show up when i searched pcie 4 m.2, solved both my question, and got affordable solutions

I’m late because of a 8:47 morning launch of an Atlas V from the cape. Anyway, good comparative analysis of the different interfaces. Even on usb it’s fast. Thanks as always.

@ExplainingComputers

8 ай бұрын

Now that has to be one of the best ever reasons for being late! :)

@hugmenow.

8 ай бұрын

Fantastic!

@MicrobyteAlan

8 ай бұрын

@@hugmenow. hi, 🤗

@hugmenow.

8 ай бұрын

@@MicrobyteAlan ☺

I was just looking into adding an M.2 card to my PCso this was timed perfectly. Many thanks Chris for a first class explanation

Indeed explaining. You work is invaluable ❤

I like and appreciate the way you went through all of the variable permutations. Very informative. Thank you.

Oh come on people, give Christopher the additional 49k subs he needs to reach that magic 1 million! Another interesting video. I plan on putting my daily computer from 2014 on steroids. It looks like an adapter card like this can take care of that.

@terrydaktyllus1320

8 ай бұрын

I would, but you can't subscribe more than once!

Great way to start the week! Always the best useful information!

@ExplainingComputers

8 ай бұрын

Greetings Leslie! I hope that all is well with you.

My son needed more SSD storage to run Starfield so we quickly bought the same X4 board in your video and a 2TB Nvme drive. All worked perfectly, first time! We put the heatsink on just in case. We took a chance as it was just before this video was published. Learned a lot from this and will check my performance this afternoon. Feels very fast and Starfield works perfectly now.

@ExplainingComputers

8 ай бұрын

A great result. :)

I actually recently bought an NVMe to PCIe adapter board as I wanted to use it with an NVMe SSD as a boot drive in an older SFF desktop PC. However, after going down a bit of a rabbit hole, it appears that not all motherboards, generations of PCIe, or versions of UEFI (I didn't even know there were different versions of UEFI) support NVMe drives installed via PCIe to be bootable. Therefore, my drive showed up as a generic storage device only and couldn't be booted from. Also note that Microsoft did used to host a Windows 7 NVMe hotfix on their website, but has since been taken down. You can now find it on the support section of Lenovo's website, and should work on any system and not just a Lenovo one, so you can retroactively inject NVMe support in a Windows 7 computer.

@bjre.wa.8681

8 ай бұрын

Yes, Yes, I went down all the same "Rabbit Holes" you did. Days of investigating. I found to be incredibly frustrating. I was working with older computer systems (Dell office grade - not true work stations). It was the final straw. Update hardware so I got the newer - NOW -- UEFI AND motherboards with internal M.2/NVME slots. I'm still on WIN10. I've recently been migrating to Linux/Ubuntu/Mint/Cinnamon. I to the point I JUST want SOMETHING to work consistently. I've work to do and just don't have time to constantly diddle with hardware issues. I know Chris "mentioned Heat issues with the external drive enclosure and wished he had spent a little more time exploring that as I've read that people are experiencing enormous slowdowns (throttling) in real world use. Again with the rabbit holes!

@Darkk6969

8 ай бұрын

@@bjre.wa.8681 Chris did mention in his video that it's only a quick test so didn't need to use the heatsink. Under normal use I'd definitely use them in my Linux setups.

@devincurrie4145

8 ай бұрын

I have an old Lenovo m93p SSF desktop PC. Is it worth going down the rabbit hole to see if this PC is able to boot from NVMe?

@FlyboyHelosim

8 ай бұрын

@@devincurrie4145 That's entirely up to you and depends on your proposed use-case.

@subhashsehgal2278

8 ай бұрын

I have Asus H110M-CS Motherboard for Intel 6th generation which don't have NVME M.2 slot on board and on Asus website 4210 is the last BIOS available which I already have installed there is no Nvme configuration settings available so i have only PCie x 16 slot free to attach Nvme adapter but I want to use Nvme SSD for Boot drive so is there any chance to use it as boot drive if yes then please make a installation of windows 10 on Nvme using adaptor Card and please reply my question asap if anyone is sure about it because on the KZread no one has done this experiment so it will be very helpful for many people in the world thanks.

I dug-out one of the x4 PCIe NVMe cards when you previewed this in a members-only message a couple of weeks back. I had previously tried this on a Windows 7 PC, which didn't work. That machine has since been "upgraded" to Windows 10 and can now see the drive, but the machine can't boot from it as the BIOS is presumably too old to cope with such drives. I'm now off to the Amazon locker to collect the toy hovercraft you previewed this week!

@ExplainingComputers

8 ай бұрын

Good luck with the hovercraft!

@Robbie-mw5uu

Ай бұрын

I am having the same problem with my non-UEFI bios motherboard from 2011.

Very well done and complete as usual Chris. There's one thing I'd like to add. If you have an old computer and would like to add an NVME drive to your system via a PCIe slot, check the BIOS if you hope that drive will be a boot drive. However, I don't believe there would be any problem using the USB external enclosure you showed in this video. It all requires a deep dive and close examination of the computer system at hand.

@devincurrie4145

8 ай бұрын

Yeah I was wondering about that too as this reminded me of the extra steps we needed to ensure that drivers are installed in order for the old main board to recognize the SATA HDD when it first came out.

@bitelaserkhalif

8 ай бұрын

Theoretically, Sandy and Ivy bridge can use them as boot drive, but you need BIOS modding or clover boot. Haswell, introduced nvme boot (even with PCIE adapter)

This weeks USB classification names 😀 I love a touch of dry humour.

Just thought I'd add some "on topic" info: For people who bought an ASUS HyperX PCI-e x16 card (for running multiple NVMe drives via PCI-e), I found out something about it recently. For running a RAID-0 of four NVMe drives, you can use Intel RST (designed for consumers with high end desktops - "HEDTs"). There's no real need for consumers with HEDTs to use Intel VROC (originally called Intel RST Enterprise), as we'll likely not need its special features. So you won't need to buy an Intel VROC key to make a RAID array on the PCI-e card. However, since the RAID is run from the CPU, it'll put a small overhead on your system. Something to take into consideration. Hope this information helps anyone with this card and who is trying to figure out how to make a RAID array using it. Thanks for the video Chris. :)

@ExplainingComputers

8 ай бұрын

Thanks for sharing. :)

Thanks, Chris. Bought a low-end laptop with a 128GB nvme drive & 4GB RAM recently. Bought a Vantek internal card and a USB non name brand USB 3 adapter, 2 1TB nvme drives to upgrade the laptop and a home lab server. They (the card and adapter) were well worth the cost, and made the laptop well worth the money, too. Your info followed my steps exactly for determining the speed improvements... This is another video I will put in my reference library to help others understand the what and how of hardware, and examples of speed improvements that can be had for little investment of time and effort.

Another lovely Sunday with EC☀and million subscribers is so close. Some time ago I tried to give my beloved RPI 4 even more speed using M.2 NVMe with a USB 3 adapter. That didn't help at all, because the bottleneck is with the USB 3 port itself. In addition, M.2 get extremely hot compared to SSD (SATA).

2:33 STANLEY, MY BELOVED 🥺 Anyway, another good explanation!

@ExplainingComputers

8 ай бұрын

Greetings!

@Praxibetel-Ix

8 ай бұрын

@@ExplainingComputers CHRIS, MY BELOVED 🥺❤️ ....okay, I'll stop. Hi. 😂

@TheOleHermit

8 ай бұрын

@@Praxibetel-Ix "Don't get me started." (I promised I wouldn't) 🙄 Hope you found a good solution for your eternal drive. 🖐😎

@Praxibetel-Ix

8 ай бұрын

@@TheOleHermit Hello! Alas, not yet. I'm broke. 😭😂

@TheOleHermit

8 ай бұрын

@@Praxibetel-Ix Alas, I'm a hermit. So your words are priceless. 🙏

Excellent as always Chris, I haven't yet got into the M.2 world, but with this info, I know how to approach upgrading my elderly machines 🙂

@ExplainingComputers

8 ай бұрын

Thanks for your support. I hope that everything is well with you.

The Orico works very well. I will admit that the grommet will allow the drive to move a bit if it gets handled roughly and you have to open it up and push the drive deeper into the M.2 slot. So, if it stops working, that is where you should look first.

@largepimping

8 ай бұрын

I wondered if having the heatsink and sil-pad installed would help avoid this - IOW, are those designed to help hold the drive in place, etc.

@act.13.41

8 ай бұрын

@@largepimping That could hinder getting the outer case off and on.

@cwt114

8 ай бұрын

That happened to me, I have an exact blue enclosure, I ended up cutting a drinking straw at the same length of enclosure internal width and put it to keep the rubber thing and drive stay in place.

@itstheweirdguy

8 ай бұрын

Is the Orico detected in clonezilla, and is it bootable? I have a off brand one and it is neither. Works fine if you are already booted into an OS, it defeats the purpose for me.

@act.13.41

8 ай бұрын

@@itstheweirdguy I have not tried it with clonezilla, so I have no answer for you. Maybe someone else will speak up.

I put a an NVMe drive in my old computer... it worked beautifully. I had to mess with the bios to make it bootable, that was the only downside.

@Arsal-fv6vv

24 күн бұрын

Hi, I have asus p6t se motherboard, I just got samsung 970 evo plus and I also got the pcie x16 connector for nvme, Can you tell me what changes I have to do in order to make it as bootable drive?

as always, water clear video, amazing spelling and voice, i wish we had all this content or at least similar quality content in schools to teach kids the basics and more advanced topics around computers... sadly here we didnt when i was in school... thanks for sharing your knowledge with us !

Apparently, there are two hotfix files adding NVMe support to windows 7(not sure if that's needed with company-specific NVMe drivers), but Microsoft seem to have removed them from their website. However you can find them in some utilities by motherboard manufacturers(like ASUS EZ Installer), even with a tool to integrate them into an installer.

@readmelast

8 ай бұрын

Both HP and Dell slipstreamed NVMe support in their last Windows 7 media. This makes it very easy to install onto a NVMe boot device assuming the respective vendor's hardware actually supports W7.

@oldfatbastad6053

8 ай бұрын

win-raid have them.

Outstanding video as always. Thank you for the graphics and tables showing the differences between technologies.

Useful information indeed! Looking forward to seeing your “Free Cloning Applications “video. As I understand it, these were applications that the Empire used for the Clone Wars. I could be mistaken.

@ExplainingComputers

8 ай бұрын

You are correct. They were first developed on Kamino.

@perrymcclusky4695

8 ай бұрын

@@ExplainingComputers Awesome!

Brilliant, I just increased my drive Read speeds by 6 times and Write speeds by 10 times on my 6 year old PC using this simple upgrade. Looking forward to the cloning video.

@ExplainingComputers

8 ай бұрын

Now that is a result! :)

@mgb0791

8 ай бұрын

Just on the subject of cloning, I tried the Samsung cloning tool "Data Migration" that came with my SSD NVMe and despite several attempts it would just freeze almost straight away. Found Macrium Reflect which was free and worked flawlessly to copy OS and data to the NVMe which is now my C drive.

I love the pace and clarity of the explanation. Thank you for this.

14:46 "Otherwise known, at least this week" Haha! I don't have any M.2 storage yet, but your videos have me prepared for when I do. Thank you for the clear and concise videos!

I got so confused with this topic, so thanks for the clarification. Now, I know what I need to add an MVME drive to my system.

This is without a doubt the clearest explanation of this technology I've ever seen. Thanks, mate!

The usual terrific clarity on all things computing...

Had to work this weekend, so I'm late on the reply.. I enjoyed this one very much.. I just bought one of the PCIe-NVMe adapter cards and wasn't sure which slot was best.. Guess I am NOW!!! Thanks for much for all you do Mr. Barnatt!!!

It seems my response to a comment some weeks ago inspired you, lol. It's a good video, and very practical; a lot of users will benefit from it. I had also tried another Orico USB enclosure with a 2TB NVMe-drive, but it was excruciatingly slow (may have been due to my case-front connectors) so eventually, I decided to use the adapter, instead. It's now cheerfully running MS bootmanager and Windows 11Pro. Looking forward to the cloning software video! Cheers.

Excellent Demonstration with clear info. Thanks Chris.

Wonderful - looking forward to the coming cloning video!

Thanks for a great comparison. Explanation of how different PCIe slots affects the performance of the same drive was a very well described. Good work!

Two thumbs up - basically everything you ever wanted to know about M.2 in one video.

Thanks Chris for another informative & timely video. I was going to fit a PCIe NVMe adaptor to my old motherboard, from your information I'll hold fire until I can upgrade my system :)

More great information. I eagerly look forward to your cloning video. It will be very useful to me, because cloning is something I want to be able to do, but it is an impenetrable wilderness to me so far.

Dude I love your channel so much, my favorite computer channel on KZread, you've saved me so many times already with purchases and new tech

This is great stuff, haven't explored the wonderful world of M.2 yet, but I feel much better prepared now!

Oh my! Thank you, Christopher. I was wracking my brain trying to think of a way of expanding my PC's storage as cleanly as possible. It never even occured to me to use a PCI Express slot to put an extra NVMe drive in. I order the glotrends one from your Amazon shop and now I'm a happy chappy with 2TB of DirectStorage-ready space! I believe I can already see an improvement loading some of my games on Steam.

Fantastic tutorial, as always, Chris B. 👏👏

I'm currently using An NVMe 6Tb external drive for a backup drive. I remember my first PC was a 386 and the snail speeds back then were considered quite fast but they weren't always reliable. amazing how technology advances so rapidly. Yes I was in my early twenties when I got my first PC. Always thanks for the great info Chris.

A nice review. I ran into the limitations of some M.2 sockets about a year ago when tring to insert an NVMe into a standard PCIe M.2 socket.

Good morning, Chris, and thank you for another informative video! Nice job on the graphics, too!

another Sunday, another interesting explanation 🤖

Thank you for the informative video - I appreciate the extra work you do with the graphical models as they add to my understanding of the component layout.

Always the best explainer on the block, CB talks about TWO of the craziest concepts in computing: M.2 and PCIe. Confused? Watch the video.

I have 3 usb drive cases I use them on my Raspberries to load the OS.They work excellent. I didn't know they made cards I think I wil pick up one for my HP computer. Always a pleasure to learn something new. Love your videos, they teach me new stuff and are really enjoyable. You make my Sunday a great starter to the week

@xrafter

8 ай бұрын

PCIe card SSDs are better.

@edwardaudet8367

8 ай бұрын

@@xrafter I use the USB deices on my raspberry pi, I'd like to get a pcie card for my HP computer, and see how work

@xrafter

8 ай бұрын

@@edwardaudet8367 make sure to watch this video to make sure it is worth it. because raspbarry pi won't benefit from a high speed m.2 drive. it will run like the USB drive but slightly faster .

In practice, I find by far the most important factor in speeding up my PC is in the reduced latency on random access, not the ultimate in sequential throughput. As such, I note that there is relatively little difference between the performance on the x1 and the x4 PCIe interfaces, whilst the USB one is substantially worse on the relevant CrystalDiskMark result (the RND4K Q1T1 run). It's less than 60% of the speed on reads, and 40% on writes. Whilst there are applications where the sequential throughput is a very important factor such as, maybe, video-editing, it's that random access capability that seems to dominate, especially on system access. It's a factor that I think tends to get over shadowed by those sequential access headlines.

@milescarter7803

8 ай бұрын

For this reason if x2 bifurcation was available I'd love to see a PCIe x16 to 8 drives adapter. I think some older LGA 2011 systems or SuperMicro offer this. Would be good for a NVMe based NAS

M.2 is cool and all but what happened to M.1 lol

@blackjam_alex

8 ай бұрын

It is hidden in Area 51 along with Windows 9.

@HupfderFloh

8 ай бұрын

​@@blackjam_alexdon't you mean area 50

@seancondon5572

8 ай бұрын

​@@blackjam_alexno, actually, there have been SO MANY mysteries which the government has been involved in since the Roswell Incident, that new Black Sites had to be created. The x2 PCIe slot is held at Area 72, and there is a working m.1 slot and card at Area 77.

@seancondon5572

8 ай бұрын

As far as Windows 9... that's held at Area 78.

@r0galik

8 ай бұрын

Maybe it was mSATA?

Great video. As I have upgraded my laptop twice, there are two M.2 cards sitting around. Soon, that will change!

Great video, thanks for good explanation of USB3+ standards and the good demonstration with a speed tests. It keeps me updated.

As usual your video was a great enlightenment about these devices. The fact they look so similar to ram always confused me so, but now it all makes sense. Thanks again!

sadly my memory also needs upgrading, luckily these videos can be found when needed.

Just replaced a m.2 NVME on an old thinkpad t480s. Very timely video with good information. Thanks!

A most useful and timely video. As ever very clearly explained. Thanks.

Very interesting, I've always had problems recognizing the differences. Thank you very much!

That was quite good benchmark demonstration, thanks!

Fantastic video! Have been considering an m.2 via PCIe and this helped clear some things up. Thank you!

Thanks for the video. Great video as always. I was just wondering about this last week.

Another amazing, informative video. Thank you!

Thank your for this video. Answered the questions I had without have to look through a bunch of videos.

Thank you so much Chris! Very helpful video.

Thanks again for another great video! Just bought a glow trends adapter too!

I spent hours untangling my options for M.2 extension. This video would have saved me so much time.

You are THE BEST, Christopher: max crystal clearness!

I've used an external case for SSD, with great results. It does get quite warm when in use though, but it's still working fine. Thanks for another great video Chris.👍

An excellent review of the topic, thanks Chris

Can't wait for USB 3.3 Gen 3.3 to come out next week!

Some days ago, I used that same adapter to add a NVMe drive to my old system. First my idea was to get a SATA SSD, but then I saw the adapter online and realized it would be faster than the SATA ones, even using a cheap NVMe M.2 SSD and taking onto account the PCIe 2.0 instead of 3.0. The only downside is it can not boot directly from it (cause of the old motherboard), so I would still need to use the GRUB loader on the HDD. That way I installed the new Linux Mint 20.2 on it (when you install, remember to tell the installer to put GRUB on the HDD, and not the NVMe). I also had the idea of using a USB stick drive to boot with the GRUB on it, then redirect the boot to the NVMe, I'll test that later.

I purchased this enclosure from Amazon. SABRENT USB 3.2 10Gbps Type C Tool Free Enclosure for M.2 PCIe NVMe and SATA SSDs (EC-SNVE) Takes both SATA & NVMe drives, and the top is clam-shell rather than slider, so swapping drives is easy, and it works a treat for cloning M.2 drives. USB-C connector. (I use it to play around with M.2 drives on my RPi Argon cases, plugged into the RPi’s second USB3 connector, or on an OptiPlex running Linux)

@ExplainingComputers

7 ай бұрын

That's a nice enclosure. Good find. Thanks for sharing here. :)

Really useful video. Thanks. This stuff is a bit tricky but you make it so easy to understand. It's important to know when purchasing new hardware.

These videos are so much like my childhood school educational videos from the 80s.. Superb!

Very clear explanation! You can't always tell if something will work the way it should do unless you test it. For instance, a PCIe NVME 4x adapter is only recognised on the system sometimes until you restart it, where the mSATA drive works every time but causing the hard disk drive light to constantly stay on instead of showing when it's being accessed. The solution could be to connect it to the remaining SATA 3 socket, which could work faster as so it's not connected to SATA 2 by default. NVME drives use the same technology as a GPU via PCIe, thereby communicating directly with the CPU as opposed to a hard disk drive interface. Everyday use would appear the same in speed, unless booting into the operating system.

Excellent video ....and wow, you're installing those cards en screws very quick!

Wow. I knew about nigh all of this before watching, but this is by far the best video on the internet for explaining such a matter. Keep it up!

In fact I currently am faced with disk space getting low. Such an adaptor card might solve my problem. Thanks

@terrydaktyllus1320

8 ай бұрын

Yes, I'd forgotten about PCI-E to M.2 adapters and I've a couple of small PCs that have either run out of SATA ports (having only 2 of them) or don't have room in the case for more 2.5" or 3.5" drives, but do have a spare PCI-E slot. It's a great innovation to have the ability to expand storage cheaply whilst staying within the profile of a PCI-E card, even a low profile one!

A much needed video, thank you Chris.

Balena Etcher is a really good drive clone tool. I've used it twice to move Linux installs from spinning rust drives to SSD drives on old laptops.

I already knew a good amount on M.2 NVMe drives but I learned some things! I was curious on these Adapters & Enclosures but now I am ready to foray into the world of M.2s.

Best demonstration and explanation on the internet. Thank you for making this video!

I learned something new today. Difference between SATA and MVME support. I might get a low height card and drive for my old DELL Optiplex running Linux.

luv your vids very informative and none of the eccentricities of its hosts. oooh closer to one million subscribers now.

Thank you for that great introduction to M.2 SSD adapters. I learned how to identify an SSD as SATA or NVMe interfaces. And both the adapter recommendations were good to keep in mind. However, my PC is rather old to try this as I don't think my motherboard can benefit from the performance due the older chipsets it uses.

Many thanks Chris - you've cleared up a lot of questions for me. 🤩

Perfect timing--I just ordered a large M.2 SSD and an enclosure so I could could clone my smaller, rapidly-running-out-of-space onboard M.2 SSD onto it. Thanks, man!

The PCIe M.2 adapter cards were news to me, thanks for the insight.

Great job Chris! I hope all of M.2 SSD would be very great options for saving storage mounting space and really lightweight.

Great video to keep handy. Sometimes I think of your videos as wonderful explanations that I will need later...like a book kept on the shelf...and then one day I will run into something I don't understand, and will then then remember, "Oh, I think Christopher did a video on this!" Then, I easily find it on your channel or website and I have the solution! What a wonderful resource.

Thanks, more information for my computer projects.

Thanks, i never understood all these m.2 shenanigans until now!

Very interesting. Looking forward to your “Free Cloning Tools” video.

super clear explanation, probably the best and clearest I've seen :D