Excellent film footage and sound. Great dialogue.

Your doin great . It takes guts to take on this project. Your views on the cam are great. Keep plugging along. Looks like we all (including you) are going to learn something. No doubt about it vary cool. Thank you for taking us along.

@Blaircraft.Engines

3 жыл бұрын

Thanks for the feedback. Appreciate it!

Do you enjoy close up views like these? If so, is this too much or good? I'd like some feedback on this! Thanks in advance...

@bud3965

2 жыл бұрын

yes! the zooming in is great

Thank you- good inside pics.

Just overhauled this engine last week in school!

@Blaircraft.Engines

3 жыл бұрын

Awesome. What kinda of case splitting method did you use? I have a rare one, I’ll share soon.

@johnnydoe9969

3 жыл бұрын

@@Blaircraft.Engines I had a partner, and we laid it sideways on a table and we pulled each and split it open with no tools needed. Great videos!

Excellent. Encourage Aspiring students pilot professional to view.

Posibilidad de traducir al Español ,gracias

Cool to watch the teardown of an O-320 after years of flying behind them, not a bad way to start my Monday... Good tips too. 👍 Were the pistons removed for long term storage?

@Blaircraft.Engines

3 жыл бұрын

Glad you enjoyed it. Actually the pistons and other small parts were just boxed up and put into a plastic tote. Everything has remained very oily. The crank is my biggest concern as it's really to most value. I share the case splitting and views of the crank fairly soon!

I presume that you have the Lycoming overhaul manual for that engine. It is very detailed and covers everything.

@Blaircraft.Engines

3 жыл бұрын

Yes. The previous owner actually had already purchased one.

Where does the fuel primer line connect to the intake manifold on this engine?

@Blaircraft.Engines

2 жыл бұрын

@Rowdy Flyer1903 the primer lines shoot directly into the cylinder head just to the side of the intake port. For some reason it had only 3 of 4 cylinders with primer lines. The main primer line T's out from the back of the engine. This answer your question? I apologize for the LATE reply, I lost access to my account for approx.. 4 weeks!

@crawford323

2 жыл бұрын

I have a D2A mounted on a tandem two place Gyroplane via a dynafocal mount and the engine has no fuel system installed at the moment. ( yeah a long ways to go) none of the primer lines are installed and all ports are plugged. Would a single primer line or two cylinders which follow each other in sequence be enough to initiate the ignition? Does each line require a vibration loop?

same for 0-320-d3g? how can one legally teardown and overhaul one. any workshop with certificate in USA?

@Blaircraft.Engines

Жыл бұрын

Any certified mechanic with a powerplant rating can legally do a field overhaul. You don’t need a certificate to tear one down, however you should be familiar with the engine designed to prevent any damage.

@bobby061202

3 ай бұрын

​@@Blaircraft.EnginesUmm...

where's the rest of the series?

@Blaircraft.Engines

2 жыл бұрын

Thanks for asking! I’m really looking forward to sharing the complete build process. My engine case just was picked up today going out for cleaning and dimensional inspection. (DivCo) I’ll be building this engine in a few months. Until then, I’ll be preparing the other small parts. Stayed tuned and thanks again for asking!