I don’t know what I’m more impressed with - LJ’s 372 build or the fact that Iron Cat casually rode out you starting it on the back of your chair. Great video 👍🏻

We miss seeing you like we’re used to seeing you Harvey, I hope that you’ll be as frequently on here as you once were.

Great blue blazes I can’t wait to put that saw in my hands brother and I want to thank you from the bottom of my heart bud, you’re a true friend in a lot of ways

Glad to see you getting these builds done. I have heard the blue coils may have a bit better advance curve than the black ones.

@BuckinBillyRaySmith

2 жыл бұрын

Myp I

@smigletat9634

2 жыл бұрын

@@BuckinBillyRaySmith 🤔?

Harvey you sr are the man. The myth. The legend. Much respect to you sr. You have my attention. ❤️🌲🌲🌲❤️

I like it!!! I fired up a "project/learning" saw that had 240psi... if I breathed on the throttle it roared. lol. I backed it down to 155psi (static)... 80* int. 100* exh. 124* blowdown .020" squish. I made my version of your stove-pipe exhaust. Keep the videos coming, we're over in Central NY and enjoy watching videos from another NY'er.

Thank you Ironhorse for another break down on a 372. Hey Cullen good to see ya buddy. Miss seeing you two hangin out in the shop. Love ya fellas. 🌲❤🌲👊🪓

@justinweaver8787

2 жыл бұрын

Good to see ya here brother

@tazman-kennyfuller

2 жыл бұрын

@@justinweaver8787 great to see you to buddy. 🌲❤🌲👊🪓

Thank you for spreading your knowledge!! I appreciate this as a wildland firefighter

@theironhorse6600

2 жыл бұрын

I appreciate you being a wild land firefighter!

Love your honesty it’s greatly appreciated

Another awesome video Harvey, you make my day always, thanks for what you’re doing!!!!!!

Really love your videos and your love and passion for your business. Please keep your videos coming. Regards from Ireland Patrick Brazil.

Thanx Harv always a pleasure watching your videos!! You always get a little something out of them! Have a great weekend!

Howdy Harvey, great to have you back again. Cheers from NZ.

I miss seeing your videos all the time, but I know how life goes. Family first!!! Much love I’ve learned a lot from you.

Thank you for sharing your knowledge! You have motivated me to work on my ms460 that's been collecting dust for 10 yrs! I hear you on this weather! I'm in Livingston County.

also had the cylinder base cut by .010 that gave me the .028 squish. thanks again Harvey. Shelby Wright

I love this channel Harve I have learned so much thank you

The cat must be a good buddy Learning a lot from you that is a blessing

Enjoyed your vid as always. Thanks for bring it to us. Be safe and be careful

Love your content bud!

That truly is the iron cat! He stayed right on your chair with that husky singing! Good stuff harvey thank you👍

@fabzacres-blackcat

2 жыл бұрын

Ol’ Ironcats’ been sendin me Intell ! 😀

Love ol Dave what a awesome saw!!!

Hi Iornhorse. Love your vedios. Pushing it to the limit. Oh yea. Love your 372 Kenny from Texas.Thanks.

Uncle harve! Love ya buddy, good to see you around again! 044 is my favorite go to, cant weild 046 like used to but the 44s, juuuuust right with a 28 light weight, the balance...and power for that matter but around here there just ain't much logging or saws yo be had was just telling the wife she aut be proud of me I havent pulled the trigger on a chinesium g444 and americanized it and ported, been in my cart on the website for 4 years now lol but I'm restraining, new baby girl kinda changes the money flow but I wouldn't have it any other way, glad ur doing good buddy, and got u a 44 to get to build a 372, I love porting the 372s, never have a 044 though but ONE DAY! Lol

Thank you for talking about your stove. I have two old coal stoves one being a Moore’s Deluxe air tight

Awesome video!!!!! 372 best saw iv ever had opportunity to use.

How bout throwing a “Harvey Stock”? You’re close nuff to draw a crowd from NY , PA. Maybe ya can get Dyno Joe to make the run - definitely draw enuff to make it worth his while. Good food , maybe set up for some jammin some music, Dyno some saws and run some saws - sky’s the limit Harv. Heck you can even invite mastermind ... we’ll set up a squared circle and it’ll be you and me tag team against mastermind and huskily. You pin em down and I’ll give em the bionic elbow off the top rope (just kiddin about monkey man and co but think about it. I’ll throw in $100 to get the ball rolling )

Just got done watching the video Horse and thanks for the Saturday video as well it will be a pleasure to shake yer hand! I'm embarrassed about how dirty my saw was but I don't tear them down like that! Maybe i should start at the least the mufflers lol thanks again Harvey!

God Bless and Protect you and your wonderful family:) Bless you for sharing your wisdom with us:)

Husqvarna all the way, but that 44 sure looks beautiful. Great vid ironhorse! Greetings from Australia

I am on #3 looked up when you said this winter flooding and ice is stupid. I am in NH Tearing into my maple sap diaphragm dairy vacuum pump. I will like I most always do is hit replay a few times to complete the 2 x 4 onto my mule head to get it. Thank for posting.

I know a guy who has problems with them damn switches... LOL. Always good to see you on here, brother.

love your work looking into doing some porting of saws my self

thanku

Thanks for sharing

Those stoves are great…we had one in the kitchen for ten years, burned coal & wood. Now it’s in the barn collecting dust

Happy Saturday Harvey nice hear from you

Your sure right about other builders copying your work intakes all show your Golden Arches I two love watching your videos

Hey iron horse Great video awesome saw!

Thank you !!!

044 nice! Just finished mine....There's a 044 build off Gtg in Michigan in may! Should be a fun time.

Well you have definitely accomplished your goal with me uncle harve far as learning and building... Soooo much

Iron horse thanks a million you taught me everything I know I appreciate you more than you know buddy hey if you need those cases on that new 044 you got cleaned up I got a buddy that powder coats them real cheap you send them to me I'll powder coat him and send them back for no charge buddy we love seeing you we all miss you you are the best I love tin Man too don't get me wrong but you are the one that came out the gate you were the first

Harvey, Sound's like you are back! Ken

Nice 🔧🔧

very nice on my one can you fit a 850 DP carb ///560 lift cam // 202 on the intake and a windage tray lol

Would love to see your take on a woods ported 288 kit saw. 👍

The Ole Mule stopped by to say Hello !!

Thank you for your knowledge iron horse I appreciate it hey you want to get that 044 cases powder coated you sending to me all powder coat them up and send them back no charge buddy thank you for everything that you have done and everything you've shared you have made my life better in so many ways there's any

@theironhorse6600

2 жыл бұрын

Email me. Ironhorsechainsaw@gmail.com@gmail.COM

Hey Iron Horse salute from Connecticut my friend! A question for you and I believe since it's A60CC soil it'll take it but I just wanted your opinion. I just picked up A357XP husky and wanted to know if a 22" bar would be overkill . I'm not a professional like you but I can fell a tree where it needs to go and I got other saws for firewood but Wouldn't mind adding another one to the collection. Thank you!! Keep the videos coming I absolutely love them

thanks 4 video. be kind.

👌 I love to hear and watch your wisdom on these saws.

Send it to Joe and have him through it on the dyno!! Love to know what the dyno shows!!

@fabzacres-blackcat

2 жыл бұрын

Purty sure that by now ol Harvs’ got a good handle on how much hp gains he gets from various builds. Dyno Joe has a cool setup no doubt , I just can’t wrap my head around some of the HP numbers his Dyno arrives at ... An 064 rated 6.5hp from the STIHL factory Dyno makes 9.8hp on Joes? That’s a 66% increase! Maybe I’m missing a piece of the puzzle 🧩 but that seems kinda far fetched don’t ya think? I could see 7.5-8hp with a Strong 💪 build that will last long time , maybe that same saw with an expansion chamber hits 10 but that’s a play toy, not a tree/firewood / logging saw at least in my book

@dynojoemods2764

2 жыл бұрын

@@fabzacres-blackcat Maybe that 064 was an extra spicy build? I didn't build it only ran it. Most of mine are in the 20-30% gain area. Never claim my dyno to be the same as factory printed numbers. Most of the time mine reads high vs printed numbers. That is the reason for before/after runs on all my builds. Maybe your 64 would be up around 9hp on the dyno. No doubt at all Harvey knows how his builds gain, I'm sure some day he will send some builds in for runs, and I'm sure they will gain well over stock, nice strong logging saws.

@andyjones6361

2 жыл бұрын

@@fabzacres-blackcat I get what you’re saying there! I’d like to see further testing to establish base line numbers equal to factory predictions. Then run the modded saws to see what the real numbers are. I am impressed with the gains though. His dyno show more hp the the claimed hp sure but then the same saw, same dyno showing the gains. We could probably (nearly) assume at least the percentage increase is accurate! I do think his builds and machine work is excellent quality. I loved that 7310 build! Have a great day! Andy

@fabzacres-blackcat

2 жыл бұрын

@@andyjones6361 I agree ☝️

Love your videos ,been watching all your videos , been trying to mimick all your small tricks . Did a 368 and a 394 with big bore , ran beautiful for 2 heat cylcles not overreving and ran beautiful . Now can’t get started 😥have compression fuel and spark wondering if I messed up timing . 268 would only stay running with 1/2 throttle only and ran above that nicely . As soon as let off it died , now can’t get started and have all 3 items , ,,, getting a little frustrating but possible bad plus or timing , any suggestions , going to try to see u may 14 at the stock , thank you for all u knowledge jungle Johnny

I have a 064 that I have to rebuild it had a broken crankshaft. I just have to get the parts ordered and get working on it. Someone gave me a crankshaft and a piston and jug for a 066 but the flywheel won’t fit on it. I’m not sure if the bolt holes for the cylinder will fit.

I like what your doing what timing numbers would you recommend for a holzforma 372xp I built one of your pipes for mine works great but I'm wanting to try porting for the first time so any pointers you got I'd appreciate it

that cat is not spooked by anything

You should get out there for some meet and greets, mingle with the people.

Good video buddy I think I'm live only a couple hours away from you I live in the adks and I cut wood to I got 372s 394 ,would you want to build a 288 I have a few of them

Have you seen the new sthil hex chains any thoughts

hey Harv, a dumb thought. i have heard it said that a 385/390 crank has the same dimensions as a 372 crank (bar the stroke). would it be possible to fit a 385/90 cylinder on a 372 case? just wondering as a built 85-88cc "372" would have to have great power to weight. (and if you could get it under a stock top cover, be a hell of a sleeper) 😁

Would you go with a new hyway crank or a used OEM one. Got a 372 x torq project and the threads are gawn on the current one.

Hey Harvey just wondering if u could possibly make a double barrel side by side exhaust pipe mod that creates pull for my husky 372xp and my 394xp

Hey Harvey. I'm building a 371 right now and this will be the first time using a degree wheel instead of just hogging things out randomly. could you give me some good strong numbers to go by. i have cut the skirts on the cylinder and case matched it to the cylinder. I have .028 squish without a base gasket. I really appreciate you and your channel thanks and keep up the good work sir. Shelby Wright

@theironhorse6600

2 жыл бұрын

Email me! Ironhorsechainsaw@gmail.com

@smigletat9634

2 жыл бұрын

@@theironhorse6600 Love it.. Great Man!

Hi everyone ☺

Sorry I missed the last few videos I managed to take a vacation.

Hi boy's...good to see or hear Cullen..lol..nice job on Jackson's 372..that wind just killer today..I'm not playing in this shit...

@eriknelson6529

2 жыл бұрын

Got some warm days coming up for a few days this week Tim 👍, then in a month we'll be up to are armpits in your favorite stuff 😂. Be good brother and take care.

@timbarden4578

2 жыл бұрын

@@eriknelson6529 hi buddy..I m between jobs.getting skidder moved this weekend..let the mud fest begin..I'm ready for nicer weather even if it mean mud..be safe brother..👍👍

Would it be worth switching to the highway cylinder to get the extra power without porting it

What year was that saw sir?

It sounds like your bike

Hi Colin

Where can I find a 064 case

Yes I would love to see a rule breaking build! It’s just a bucket of parts right

you know harve when i get on you tube the first channel i go to is iron horse channel before i go to any other channel

Hello everyone

@jolkraeremeark6949

2 жыл бұрын

Hello Stanley!

Anything I can do for you let me know

nice hair doo