Those look real good man!! And you're comfortable, that's the main thing. That bike is coming together nicely!!

@IronBornRider

3 жыл бұрын

Thanks kode! Comfort and performance, and then aesthetics is the trifecta for me. I’m liking how the bike is coming together. Thanks for watching!

Looks killer! I dig the sled man, and great content, keep it up!

@IronBornRider

2 жыл бұрын

Thanks Jason! You as well!

Those are sharp man. I know when I raised my bars off of stock height it dramatically improved the handling as well.

@IronBornRider

3 жыл бұрын

Thanks Chop! Yeah I noticed that as well. Really happy with them so far.

Highly recommend a 1.5-2" tank lift. Besides it really making the bike's lines flow more naturally, benefits are: more air across the front cylinder head, which greatly improves temperature management. tank mounted gauges are moved to an angle that are much easier to view at a glance, and reduces glare with that big 5 gallon tank it helps reduce wind buffeting on your lower body, which reduces fatigue, which improves rider safety.

@IronBornRider

2 жыл бұрын

I like this idea a lot. I might have to look into this

I’m 5’5 just picked up a low order that came with 9.5 thrashin supply. Love the look but my hands are slightly higher than my shoulders. Since you are 5’8 with 8. Sounds like 6.5 would be my ideal rise. Thank you for the video

@IronBornRider

26 күн бұрын

Sure thing. Also the seat can play a role in all this.

Great video! I have a '10 FXDC and same height as you. I am going to do something similar to yours because I am reaching too far, and leaning over way too much. Your bike looks great with what you've done! 👍

@IronBornRider

2 жыл бұрын

Thanks man! I do enjoy the lucky Dave’s risers quite a bit. Made a big difference

They look sick 🔥🔥🔥

@IronBornRider

3 жыл бұрын

Thanks man! I like them too!

great video. I have same bike and was also uncomfortable leaning forward. Also put on 8” risers and it made it 100% better.

@IronBornRider

3 жыл бұрын

Yeah it might be one of the best mods for me on this bike to date. Complete game changer

They look really good.👍🏻😎

@IronBornRider

3 жыл бұрын

Thanks Greg!

I'm looking at the same riser setup for my fat bob, still waiting for the restock at the moment though.

@IronBornRider

Жыл бұрын

Good stuff man. Really love my lucky Dave’s

I’m 5’7”. A small dude with short arms. I have to really hunch forward to turn and especially on a hard left turn my right arm has to be fully extended ( very uncomfortable and unsafe I feel ….) my main question is will this pull-back riser help even at 6 inches height instead of 8 inches ?

hey man kool looking bike mind if i ask exactly what wind screen that is on the front ,,the size and who makes it

Good video my dude.

@IronBornRider

2 жыл бұрын

Thanks miles. If I could I’d go a little higher, maybe 11 inch rise but it’s fine for now. Btw congrats on your lrs man. Love that color.

beautiful bike bro

@IronBornRider

2 жыл бұрын

Thank you Brooks!

My biggest fear with risers is I'll lose the ability to really romp on the bike. It's definitely a big difference over stock. I think I'm going to need to ride an FXLRS with risers before I commit to them. At 5'9 I'm really happy with the stock setup (though I seem to be the only one). If you're really serious about touring, cruise control and a sissy bar would make a big difference, and bags of course. Gives you the ability to strap a bag or two on the back on the sissy bar, and put your hands down and relax for miles at a time once you get really comfortable with the cruise control. I recently did a week long moto-camping trip through WV. Didn't shoot any video but it was rough doing it on this bike. Strapping a tent, sleeping bag, then a backpack full of gear was a real pain. If you're touring with motel rooms though, of course you would carry less. The good part is though, once you get to the really awesome roads you're on the FXLRS and not some huge bagger. It can definitely be done. Really looking forward to hearing your update on these down the line. They seem reasonably priced. So many of these companies want close to 4 figures for risers which seems unreasonable to me. They definitely look sweet 👌.

@IronBornRider

3 жыл бұрын

Thanks man. Yeah the bars do raise you up a bit and it may not be how everyone wants to ride. If you're used to sport bikes, stock bars/risers are probably fine. For me, after a couple hours on the bike my back was starting to ache and my hips were locking up (I'm gettin old lol). You're absolutely on point, the FXLRS is such a good base, it can really do it all and then some. Thanks man!

@BikesNThings

3 жыл бұрын

​@@IronBornRider So, when I was on my trip last month I was doing about 500 miles a day. I don't know if you have passenger pegs, but I found myself standing up on them quite a lot. I'm in my early 30s so I feel the miles a lot more than I used to. Being able to stand up on the bike for 10-15 minutes while still riding made all the difference. It's incredibly awkward to do without the passenger pegs though.

@IronBornRider

3 жыл бұрын

@@BikesNThings I do have passenger pegs but I never tried standing up on them. I might have to give that a try. On my sportster I used to just stand using the mid controls which was a little weird.

@BikesNThings

3 жыл бұрын

@@IronBornRider Try putting your left foot on the passenger peg and your right leg on the front right peg. Should be even easier with the bar risers. It shouldn't feel too sketchy. Maybe the first time but that's it. It gave me the ability to keep riding when I really felt like I wanted to stop and take a break.

@IronBornRider

3 жыл бұрын

@@BikesNThings thanks for the tip man! I'll have to give it a go

Just ordered mine..were u able to run the cable through the riser legs?

Them jawns definitely looking like a more comfy riding position.

@IronBornRider

3 жыл бұрын

I’m all about comfy jawns

Anyway can you send me links and what parts you have? I'm lookin for new handle bars for my lowrider s

Question about the cables. Bought the 8” risers and wanted to see if you could tell me what length cables I need.

@IronBornRider

2 жыл бұрын

I don’t remember what length they were. I just bought a cable kit off of eBay

look good. I have a harley slim right now and thinking of trading it for a lowrider s

@IronBornRider

2 жыл бұрын

You won’t regret it. Thanks for watching!

How do you like the gold LD riser so far?

Damn man they look gangster - like grillzzzz 🤟

@IronBornRider

3 жыл бұрын

I’m all about that gangster life!

What bar are you running. Dope riser, brother. I am sold

I’m 6’1 do you think the thrashing supply 8.5in pullback would be comfortable for me, I def hunch over on my low rider s, but I don’t want something with my hands above my shoulders I want to be comfortable thanks!

@IronBornRider

2 жыл бұрын

My personal opinion is I don't think that size would work for you. If you're 6'1 I'd think at minimum 12 inch. I'm 5'8 and I actually feel like I could've gone a little higher at 10 inches so that I can straighten my back all the way. If you have someone that can help measure, that would be the best way to figure out the height you want, so that you can sit on the bike and raise your arms up to a length that you're comfortable with. Hope that helps!

@dmvbenz7536

2 жыл бұрын

@@IronBornRider alright thanks for the feedback! Didn’t know I’d need that high of risers! But ima do what you said, sit on the bike put my arms up to where I’d like them and then measure

Really good 👍 I'm torn between this and HD apes fused 13s

@IronBornRider

2 жыл бұрын

I’ve never had apes before, but I’m pretty happy with the lucky Dave’s. Whatever your decision I’m sure will be a big improvement!

@This_is_My_Story

2 жыл бұрын

@@IronBornRider well I ordered the same risers but 10"... Now I need to find the guauge relocation buckets to work with the LD risers.

@IronBornRider

2 жыл бұрын

@@This_is_My_Story congrats! I thought about relocating my gauges but i like the look of the current dash.

@This_is_My_Story

2 жыл бұрын

@@IronBornRider I didn't want to bring them up. But I guess coming from a Roadglide I got so use to having the speedo upfront. I guess it's just getting use to having them on the tank like the old days on my Heritage. Let's see 👀 l am also trying to get use to the mid controls as I have always had forward controls. Thanks for taking the time to replying really appreciated.

Same set up I'm looking at. Stock bar? sorry if its in there and I missed it. Thanks

@IronBornRider

6 ай бұрын

Yeah it’s stock bars. No worries man

Where did you get the fairing and the shield from?

@IronBornRider

2 жыл бұрын

Memphis shades 👌

Tou never mentioned how much did you spent labour and parts.

@IronBornRider

2 жыл бұрын

I’ll have a follow up video on a longer term review

Hella Sick Bro!! Is that handlebar stock?

@IronBornRider

2 жыл бұрын

Thanks Ren! It is stock.

How tall are you?

After doing some Long distance riding... You may wished that you went a little higher (12") Your arms are still extended and locked... After a long period of time you will get more relaxed and lean back a little more... The stretching of the sholders will be punishing.Eventually this stretching will cause you st start leaning forward to ease up the pain in the shoulders which will also lead to your back to start getting fatigued... Many make this mistake in always having the fear of going too high...

@IronBornRider

2 жыл бұрын

you're 100% correct, and I've been thinking about this more lately and was actually thinking about doing a follow up video. Never having risers on any previous bike, I didn't know exactly what length to go with. If I straighten out my back all the way, my arms come down quite a bit, and I'd prefer to keep it a bit straighter. Thanks for the comment, we live and we learn!

@ellissmithjr6599

2 жыл бұрын

@@IronBornRider We all eventually learn this 👍😎🇺🇸🇺🇸🇺🇸

@jeremyh8446

2 жыл бұрын

@@IronBornRider So what riser would you recommend? The 10 inch? I saw your video and really liked your set up and was debating wether I should go with the 8 inch like yours or the 10 inch.... but then I saw this comment. I am 5'10. Was planning on keeping my bars stock as well, like yours.

@IronBornRider

2 жыл бұрын

@@jeremyh8446 For you I might go with minimum 10 inches. I think I could've gone 10 and have been completely upright and comfortable. Right now with my 8 inch set up, I'm hunched over just a tad.

@jeremyh8446

2 жыл бұрын

@@IronBornRider Just ordered the 10 inch!

which height are the memphis shades glasses?

@IronBornRider

Жыл бұрын

It’s an 11 inch screen in this video

1k boom 💥

@IronBornRider

3 жыл бұрын

Yes sirrrrr!!!!! Thanks to all the supporters.

They seem like good quality risers but I really think you should have gone with black! I mean, they look okay. They don’t look bad, but I just think they kind of stand out too much. Maybe a combination of black riser part and gold on the clamp part? But it’s your bike and if you like them then that’s what matters. Not trying to be a bummer or anything, I just like black I guess.

@IronBornRider

2 жыл бұрын

Yeah I hear you, I went back and forth on it myself. In the video you can see the whole riser which can be loud, but in the photos of the bike you only see a little bit of the gold even if the whole riser is gold. I'm still pretty happy with the decision, this will probably be the loudest piece on the bike anyway since almost everything else is just all black. Thanks for the feedback though, appreciate you bro.

@robbyclark6915

2 жыл бұрын

@@IronBornRider Yeah, it does look good. I mean it’s just a matter of taste. But the decision does necessitate that you add more gold pieces throughout the bike to blend it all together. Which I think you said you wanted to do anyway so probably a good decision for the direction you’re taking it. I’m just not a fan of the gold thing. If you watch blockhead he does a bunch of gold stuff to his bikes that everyone really likes….except me I guess? I just don’t care for it. Reminds me of fashion from the 60s. Like gold drapes or a harvest gold refrigerator or gold upholstery on your chairs and couch.

@IronBornRider

2 жыл бұрын

@@robbyclark6915 I generally don’t like gold by itself but when paired with a lot of black I tend to like that pairing

@paulson9616

Жыл бұрын

I think the gold looks sick. Just separate from everyone else with the color of black. Good choice 👌

How much did you pay for the install of you don’t mind me asking

@IronBornRider

4 ай бұрын

I paid $150 only because my shop made a clerical error on their quote. Normally I think it costs anywhere around $5-800 for install

Have you done the gauge relocation ?

@IronBornRider

Ай бұрын

No, I actually prefer the gauges on my tank

How tall are you I’m 6 foot u think I would need 10 inch risers

@IronBornRider

3 жыл бұрын

I'm 5'8 so yeah 10 inch would be good, you might want higher than 10 depending on your preference

@marctripp4827

3 жыл бұрын

Gotcha appreciate it

@slow_but_lower1408

3 жыл бұрын

@@IronBornRider YO IM THE SAME HEIGHT 😂

@IronBornRider

3 жыл бұрын

@@slow_but_lower1408 lol I’m lookin out for all of us shorties out there 😂

@slow_but_lower1408

3 жыл бұрын

@@IronBornRider 😂😂😂

How much was the whole installation?

@IronBornRider

4 ай бұрын

They goofed on my estimation and only charged me $150 lol. Most shops will quote you about 5-8 hours of labor mostly due to the cables. Shop rates are anywhere between 80-100+

And how much did it cost to do everything

@IronBornRider

3 жыл бұрын

That's a long story, but essentially I was quoted anywhere from $500-800. My advice would be to stay away from HD dealership and Harley mechanics. Try to find a small bike shop that'll give you an honest quote. It took my mechanic about 3-4 hours of labor, and they charge usually by the hour ($80-100 per hour is what I've seen)

@marctripp4827

3 жыл бұрын

Gotcha appreciate it

@jackmetzger8644

3 жыл бұрын

@@IronBornRider Jesus that’s nuts. My H-D dealership charged me $390 for riser install

@IronBornRider

3 жыл бұрын

@@jackmetzger8644 that sounds pretty accurate. The H-D dealerships around me can get a little crazy. I took it to an independent shop and they hooked me up like crazy

Dude, what is up with that clutch cable??

@IronBornRider

2 жыл бұрын

My lazy ass lol. I just need to line up the cable cleaner.

@Splittin707

2 жыл бұрын

@@IronBornRider Yeah, but it's on the wrong side also. Lol

@IronBornRider

2 жыл бұрын

@@Splittin707 it’s on the right side, the cable was just a bit longer than I expected

What bag is on the bars?

@IronBornRider

2 жыл бұрын

Torque motor co

@gobonhisbob1922

2 жыл бұрын

@@IronBornRider awesome bike thanks and i subbed

@IronBornRider

2 жыл бұрын

@@gobonhisbob1922 appreciate that !

What year bike?

@IronBornRider

9 ай бұрын

It’s a 2020

Should’ve got way lower risers because when you put a pull back plate on it adds 2 inches

@user-oo5gp6ps7q

2 ай бұрын

To be honest bro those bars are definitely too high for you to be able to manhandle and control that bike especially being a newer rider that’s not super experienced that doesn’t have 20 years in the saddle… The pullback plate would’ve lifted the bars of 2 inches and back 2 inches which would’ve been perfect and only would’ve costed around $200…. Nobody else is telling you things you need to hear…

"4" DOESNT SOUND LIKE ALOT.." (GIGGITY)

@IronBornRider

3 жыл бұрын

I forgot to add the "TWSS" clip

For those wondering he's 5'8". So you can figure out how these would fit for you.

Arms still way too stretched out you need a pullback plate homie .

@IronBornRider

2 ай бұрын

Definitely considering one

"Your mechanic" oof

What new wiring did you need would you mind dming me it on insta you got me added

@IronBornRider

3 жыл бұрын

I got you bro