LS1 VN Commodore gets a NEW EXHAUST system
Автокөліктер мен көлік құралдары
big thanks to all the boys at PP for getting the car finished for me for this weeks video
any enquiries feel free to message the facebook page or instagram
insta: / pp.projectperformance
facebook: / projectperformancemelb...
tiktok: / ppprojectperformance
Пікірлер: 138
little tech tip with rubber bushes you should tighten the bolts for the diff in ride height position as the bushes can tear from twisting.
@snrautoworx2840
Жыл бұрын
Yeah your right mate coz i think if you dont you run the risk of tearing the rubbers from out of the LCA.
@nzuncovered1845
Жыл бұрын
Yep, often overlooked
@imidsikkey
Жыл бұрын
I was going to leave the same comment 😅 Don't want to preload the bush.
@ConceptXX
Жыл бұрын
While your here giving out free tips can you give me something for bush replacement on lower arms? I've heard plenty of times it's simple. Front bush presses out no issues. Rear bush on diff same thing, or split outer shell with cold chisel etc, then knock out. New ones press in fine Until I see a video of it I'll refuse to believe it. I split the front bush basically want to break any strong bond formed with the 2 metals. By the end I had torched the rubber, knocked and cut the outer casing, but even with their tapered design and something solid supporting the inner walls of LCA.. pushing them out still managed to managed to tweak it . New bush started going in fine until close to centerd then fell through the other side. They're tapered and have only one direction for in and out. I don't get how it's possible. Also no one who films doing rear end bushes conveniently don't include the LCAs sorry for going off the rails there
@tonymontana897
Жыл бұрын
I'm glad you mentioned that. I was thinking the same thing when he was tightening those bushing mounts too.
VN is coming along nicely. Keep up the great content and wishing you all the best with your personal stuff mate.
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging! thanks mate appreciate it
Nice vid, and top editing 👌 I always enjoy your posts. Enjoy your Chrissy & look forward to the next one.
@MindieJ
Жыл бұрын
thanks mate you too
I have been waiting for your video hope you have a great week😊
@MindieJ
Жыл бұрын
Same to you
The car coming along awesome mate , hope everything works out mate take care , hope to hear from you soon 👍
@MindieJ
Жыл бұрын
Thanks Mark👍
Take care Chris, thanks for another year of awesome videos. Best of luck with whatever you're facing, cheers bro!
@MindieJ
Жыл бұрын
Thanks Dean appreciate it mate
The VN’s new exhaust sounds mint mate and I hope all works out well or as best as it can with whatever is going on at home. 👍🏻
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging! thanks mate appreciate it
Congratulations mate, good luck over the next few months.
@MindieJ
Жыл бұрын
thanks Jake appreciate it
Exhaust sounds killer mate. Hope everything is ok too 👍 Enjoy your Christmas
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging! thanks mate appreciate it
Sounds mean mate I hope all is good . Merry Christmas and happy new year also .
@MindieJ
Жыл бұрын
Same to you!
hope all is good with you and yours Chris, wish you all the best, Take care out there :)
@MindieJ
Жыл бұрын
thanks mate apprecite it
Hey mate, love your work 👍🏽 stay positive and take care of yourself and fam 👍🏽
@MindieJ
Жыл бұрын
Thanks, you too!
Congrats Chris, strap yourself in! All the best.
@MindieJ
Жыл бұрын
Yeh new exhaust is gna be a handful
Just wanted to say really enjoy your videos. I found your channel just before you procured the lancer. Hope the break sorts out whatever you need to but your back when your ready. Like others your clean builds, video production and editing is immaculate. I have three young children at the moment that consumes my time and money stopping my love for working on cars. So I live out my dreams in your work 😊
@MindieJ
Жыл бұрын
thanks Peter appreciate you watching, hopefully you can get onto doing a car of your own some time soon
Grouse video as always. Hope you're alright bro. Sucks that maybe no more vids but yeah stoked for whenever you can release more. All the best mate!
@MindieJ
Жыл бұрын
thanks mate appreciate it
Merry Christmas Minnie j from madmax Melbourne and a new year 👍👍👍👍🤘🤘🤘❤️❤️🇦🇺🇦🇺
@MindieJ
Жыл бұрын
you too mate
Congratulations!
@MindieJ
Жыл бұрын
Thank you!
Congratulations guys ❤
@MindieJ
Жыл бұрын
Thanks Tony
That exhaust 😍
@MindieJ
Жыл бұрын
Super happy with it
Yr edit is on point
@MindieJ
Жыл бұрын
thanks mate
Congratulations brotha 😉
@MindieJ
Жыл бұрын
Thanks Stevo
All the best Chris
@MindieJ
Жыл бұрын
thanks mate :)
All the best for you and your family.
@MindieJ
Жыл бұрын
Thanks mate
Took my own Commodore for a car wash today. Enjoy your break and Christmas.
@MindieJ
Жыл бұрын
Thanks mate you too
Hope all is well for you and your fam mate 🙏🏼
@MindieJ
Жыл бұрын
thanks Lindsay
Great video mate
@MindieJ
Жыл бұрын
thanks Jordan
Sounds nice
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging!
Nice good crew
@MindieJ
Жыл бұрын
they certainly are
My favourite part of my Wednesday
@MindieJ
Жыл бұрын
:)
Trailing arms bending- Power, grippy tyres & from what I've seen it's when people notch the trailing arm so the tyre doesn't scrub that creates a weak point & it bends there
@MindieJ
Жыл бұрын
lucky i have none of those things haha
Hi mate love your vn car movies. I'm doing up a vn. You did the bonnet hinge modification. So was that to stop the bonnet hitting the windscreen. Can you send me the link to video please. Cheers steve
@mindieJ do you know the part number for the 3.5 inch muffler you used on ya vn ?
What paint/coating have you used on the under body?
Stay safe MindieJ!!!
@MindieJ
Жыл бұрын
will do, thanks mate
Enjoying the new content. Hope all is well. Get back to making content when you are ready no rush.
@MindieJ
Жыл бұрын
Thanks mate appreciate it
Hope all is well..
@MindieJ
Жыл бұрын
thanks pal :)
Chris, I didn’t learn your name till now. Been watching since the xe days.
@MindieJ
Жыл бұрын
chris by day, batman by night
That sounds mean 😍
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging!
Mate cool car looks heaps better without hub caps.
@ConceptXX
Жыл бұрын
A clean White Commodore on silver steelies always looks good. Those five ltr hubcaps suit it even better imo. If I could find a decent set of exec hubcaps for my vr I'd throw them on
@MindieJ
Жыл бұрын
I dig both
try a stainless steel rivet or small bolt in that lockout lever
@MindieJ
Жыл бұрын
Titanium encrusted carbon fibre if it happens again
just a question bro why did you opt for a single exhaust & not a twin system?
@MindieJ
Жыл бұрын
Nowhere to run a twin exhaust on a VN, fuel tank is on other side
Nice
@MindieJ
Жыл бұрын
Thanks
Put stainless rivets in the shifter lock out.
@MindieJ
Жыл бұрын
yeh these rivets have 1 more chance
Congrats mate! Was it on tow truck to get tuned?
@MindieJ
Жыл бұрын
Yep straight off to hit the dyno again
There is a bolt missing on the header flange that bolts to the head.....Atleast it looks like that wenn u fill in the engine oil.
@MindieJ
Жыл бұрын
Correct, I spoke about it last video
@Berniessen
Жыл бұрын
@@MindieJ dint see that vid so i did not know.
@MindieJ
Жыл бұрын
@@Berniessen thread in the head is stripped, has been helicoiled since the vid
Just a question, how do you remove the rear springs in a VN before I try?
@pauledwards6446
Жыл бұрын
They will probably fall out
@Fuaarrkk
Жыл бұрын
Drop the lower shock absorber bolt, arm will fall, should give you enough clearance to pull the spring out.
@ConceptXX
Жыл бұрын
Both comments above are accurate. Jack car up, with wheels off and Jack stands under the frame, take the bottom bolt out of the shock(s). Have a Jack under the diff when doing it, then you can lower it down slowly and safely
@MindieJ
Жыл бұрын
if you have stock length shocks and lowered springs they will just fall out once the car is jacked up
May I ask why do you leave the inspection plate of the torque converter, I have notice alot of people do that.
@yeahthetroy4792
Жыл бұрын
High stall speed creates alot of heat Just helps it remove some heat
@waynegoodwin3217
Жыл бұрын
@@yeahthetroy4792 over here in Perth it's illegal to have that plate missing, pain in the arse.
@yeahthetroy4792
Жыл бұрын
In Melbourne everything is illical to mod on a car well almost everything we just do it anyway
@MindieJ
Жыл бұрын
Having no converter shield is the least of my worries if I get pulled over haha
Hope everything’s okay bloke, look after yourself
@MindieJ
Жыл бұрын
Thanks Mark
No tip looks good!! Glad you didn’t put a chrome tip on
@MindieJ
Жыл бұрын
Chrome tips can stay in 2003 where they belong
@peterdunwoodie8878
Жыл бұрын
@@MindieJ amongst a stack of autosalon mags 😂
Scotty is ready....
@MindieJ
Жыл бұрын
yeh but im not haha
@charlesparker924
Жыл бұрын
@@MindieJ cant wait ;)
Omg it looks so good and sounds fat
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging!
Use stainless rivets Next time
@MindieJ
Жыл бұрын
yeh these ones have 1 more chance at surviving
Sounds tuff need Troy to do my Vk blue meanie exhaust DM me MJ
@MindieJ
Жыл бұрын
Give the work Insta page a message, it’s listed in the video description
Time to be a father bro?
@MindieJ
Жыл бұрын
thats quite possible
You could have bought 3 mm plate and done it yourself instead of buying those other ones
@MindieJ
Жыл бұрын
For $40 it’s not even worth my time, plus I don’t have a press or dimple dyes
@5lcalais1
Жыл бұрын
It'd cost ya 40 bucks for the sheet lol
@grimreaper6112
Жыл бұрын
@@5lcalais1 No way find a piece of steel anywhere clown.
@5lcalais1
Жыл бұрын
@@grimreaper6112 really I'm a clown cause I stated a fact hahaha around Melbourne where I live a piece of sheet steel say 500x500 is 45$ which I literally just bought so that's how I know 🤷♂️ I wouldn't of said if it wasn't true, now who's the clown, dumbass 👍🤣🤣🤣🤣 Obviously tradies/shops would be able to get it cheaper but that's because they buy it in bulk ,for your guy like me or Chris here you have to pay full retail, it's not rocket science dude...
Exhaust is awesome
@MindieJ
Жыл бұрын
i havent even heard it in person yet, im hanging!
Did your MRS leave? Haven’t seen her in your videos for ages
@MindieJ
Жыл бұрын
lol no
@kanelintern6258
Жыл бұрын
@@MindieJ it has to be one of the cleanest VN’s I’ve seen. I don’t the factory look. That car would turn heads
Get rid of the steering wheel 🤮
@2003monaro
Жыл бұрын
How else would he be able to drive?
@grimreaper6112
Жыл бұрын
@@2003monaro Zip tie his cock to it.
@MindieJ
Жыл бұрын
gna do handle bar conversion
@kanelintern6258
Жыл бұрын
@@MindieJ 🤣👏