Hi Trish great vid on ESC braking. I'm one of those people that can read instructions but I over interpret things, it really helps to have somebody explain things and make recommendations. I'll be trying drag bake when we get back to racing. I'm looking forward to you doing part 2 of the ESC setting. Keep up the good work.

Thank you , great esc

My lrp esc allows me to go forward and full brake but does not go in reverse.. any idea on how to fix that?

Trish, what initial brake setting do you use what you use 6% drag brake, the reason I ask is that the 2 forces are added together aren't they and that becomes your initial brake.

This is what I need to try, ive been using br2 brakes and it’s a bit aggressive unsettling the car 👍🏻 every day a school day

trish. great video. What is the difference between the 3/4 versions of the Flow X

What would be a good esc for a trinity hole shot drag master 3.5. I have 4000 mah 110c 220c burst 2s and a 6500mah 110c 220c burst 1s. Just need a esc now. For my rj speed 30.

Hi, I have the nosram hd version of this esc. What's the thermal cut off temp? I've seen you can check the blinks after a race to check temp, but, I have no idea what the blinks actually mean. It says 10 blinks is shut down, 9 blinks would be 5c under that temp 8 blinks 10c under that temp. What is the shutdown temp??

I recently bought an X flow offroad, but, it’s got 3.1 software on it, is it worth me updating to 3.2?

Hi Trish, what Lrp speedo would you recommend for Blinky touring car? Cheers

@moritzlaut4515

4 жыл бұрын

I would recommend #500005 Flow X Stock Spec, if you want to have the shortest receiver cable, available just get yourself the touring car spec, and update it to v5.2 stock software, since softwares are fully interchangeable😊

@irvine40

4 жыл бұрын

Moritz Laut thanks 🙏👍🏻

Hi Trish 👋👋

Way too complicated,,, just make a program box for it already... you will be more prone to losing or forgetting a paper than a program box.

@moritzlaut4515

4 жыл бұрын

Get into it, it's super simple and easy to set up...

@quepala

4 жыл бұрын

@@moritzlaut4515 nah... will Stick to my HW with wifi. LRP should really get with the times on this. Will try the new motors though.

@nealecarbis3637

4 жыл бұрын

Have you used one, I find once the main parameters are set, fine tuning for the day is super easy. You soon pick up which settings to change and the button sequence becomes second nature, just like using your mobile phone. Looking forward to part 2 could you do a practical demo of the set up showing the way to proceed through the settings, the different colours of the parameters and refer to the chart, I found once I had understood that it became easy.

@tylermarcy1670

4 жыл бұрын

I came from HW ESCs. I honestly like the LRP better. It honestly feels a lot better than HW in my opinion.