Installed mine yesterday, and used a MyMachinist gauge block off plate. Great gauge mount. Instructions are spot on in this video!

@gifty7464

2 жыл бұрын

Wow, thanks! Wish you could post pics in replies!

Looks fantastic

Looks great......nice job

@gifty7464

2 жыл бұрын

Thanks 👍

Good

Great vid. Where did you source the blanking grommet for top if frame?.

@gifty7464

Жыл бұрын

Hi. I just used the stock one that was in that location and cut it from the wiring, and then just reused it to plug the hole.

Very nice job! Will those work with the dyna version? I have and FXDLS and plan to do this modification!

@gifty7464

Жыл бұрын

I don’t know for sure, but I can send you one to try and if it fits you can pay then, if not, you can send back

Can you add a picture of the block off plates installed? Thanks in advance!!

@gifty7464

2 жыл бұрын

Not sure how to do this. But, if you email me at gifty74@comcast.net I’ll send you a pic with the block off installed on the bike!

Do you make with one opening in the middle of it for just the Speedometer?

@gifty7464

Жыл бұрын

I do not have one 'in stock', but could pretty easily design it up and make a one-off. Probably would cost about $135 shipped.

Would this work if u had the new quarter fairing?

@gifty7464

2 жыл бұрын

I’ve been asked before, and not sure actually. I’d like to know. Can you send me some pics of the area where it would fit?

Hi, I’m thinking about doing this and then getting my whole tank custom re-sprayed, can I just dremmel off the bracket that sticks up from the tank easy enough do you know? Also what’s shipping to the U.K.? Cheers 👍🏼

@gifty7464

Жыл бұрын

Hi! Yes, I think cut off the bracket and sand it down and paint is what some do. Shipping to UK is around $40 I believe. I could do $140 shipped for the bezel in powder coated black, and $175 with a blockoff plate for the gauges.

@mikew2054

Жыл бұрын

@@gifty7464 ok great thanks, I think I’ll just for for the mount for the gauges. How do I place an order? Thanks

@gifty7464

Жыл бұрын

@@mikew2054 just email me at gifste74@gmail.com and I’ll send you a PayPal link. You pay and I’ll ship within a few days. Just sent one to Australia last week.

Interested in grabbing this and the block offs in textured black if you’re still doing them. Seeing 2 different emails in the comments and the paypal link doesnt give any options

@gifty7464

5 ай бұрын

Yeah! Still selling them. Email is gifty74@comcast.net. Email me there and I’ll get you hooked up. Should be able to get them out early next week. USPS takes 2-3 days.

Hello. Did you have to replace the cables with longer ones? assuming a new riser 5 "

@gifty7464

2 жыл бұрын

Hey. I have 5” risers and no extension needed. The risers height actually isn’t a factor because the wire gets routed up front, not into or around the riser.

@marcinzajac1449

2 жыл бұрын

@@gifty7464 clutch cable and brake hose no extension is needed?

@gifty7464

2 жыл бұрын

For 5” risers, no.

Any updates on if this fits behind the Memphis shades fairing?

@gifty7464

2 жыл бұрын

I don’t have one so can’t test. But I can send you one with some very light scratches (shipping from vendor before they started packing individually) and you can try it out? Email me at gifty74@comcast.net and we can work something out.

@gifty7464

2 жыл бұрын

Apparently it does work with the Road Warrior fairing! Someone in forums just posted a pic showing it fitting.

Super interested in grabbing one of these from you, my only concern is how visible are they? I feel like the riser would block most of the gauge? Thanks in advance!

@gifty7464

4 ай бұрын

I have the 5.5” risers (2” more than stock) and I get almost full view. Stock risers should give full view. Have them ready to ship!

@d00dz45

4 ай бұрын

@@gifty7464 sorry for the delay in response but absolutely! I’d love to get one of these from you

@gifty7464

4 ай бұрын

@@d00dz45 Sweet! Just email me at gifty74@comcast.net and I'll send you a Paypal invoice!

Super cool. Are you still making them? And shipping to the US?

@gifty7464

Жыл бұрын

Yes sir! Have the bezel in gloss & textured black powder coat. Email gifste74@gmail.com. $115 shipped.

@tophat_mustache

Жыл бұрын

Great. I'll write you an email.

@tophat_mustache

Жыл бұрын

​@@gifty7464

Hi. Are you still selling shipping? I am interested in the relo bezel and blockoffs. Thanks!

@gifty7464

2 жыл бұрын

Sure am! Email me at gifste74@gmail.com and I’ll send you the details. Shipped 2 last week.

Are the gauges on the FXLRS 4” diameter? Thank you kindly

@gifty7464

9 ай бұрын

The holes for the gauges I went with 3.630"

Have you made the block out plate(s) yet?

@gifty7464

2 жыл бұрын

Ordering some next week. Will probably make those as a simple oval plate in textured black powder coat.

@gifty7464

2 жыл бұрын

Block off plates in textured powder coat, and another round of relocation bezels will be available to ship first week of January!

Can the bezel be used (gauge visibility) with the stock risers/handlebars?

@gifty7464

2 жыл бұрын

Yes it can. I have 5.5” risers (stock are 4”) and I can pretty much see both gauges in full. I’m 5’11”, stock seat.

@jameswatkins2752

2 жыл бұрын

I'm not that tall. I'm concerned about seeing the fuel gauge, etc. I've been looking at maybe getting some stock (or there about) height pullbacks.

@jameswatkins2752

2 жыл бұрын

@@gifty7464 Hey. Not sure if you've seen them yet, but guess where the gauges are located on the '22 Low Riders?

@gifty7464

2 жыл бұрын

@@jameswatkins2752 saw some pics, yeah. Looks like on bars? At least we’ll maybe have an option to buy a console that is slim with no holes for the tank

Where did you get the kit from?

@gifty7464

2 жыл бұрын

I designed and had them made for me, to sell. I'm still selling them, $115 shipped in gloss black powder coat.

Will this work with a Memphis shades fairing, I'd love to have one

@gifty7464

2 жыл бұрын

Can you send me a few pics? Does the stock plastic piece fit in front of the fairing? My bezel is same as the stock piece. I’ve been asked before, but don’t have a way to test it.

@coreyklippel6984

2 жыл бұрын

@Gifty74 I'm not near my bike next few weeks but will look through my pictures and see what I have that may show it. I did remount the stock plastic half moon shape piece behind the road warrior , Memphis shades

@coreyklippel6984

2 жыл бұрын

How can I send you the pictures.?

@gifty7464

2 жыл бұрын

Ah, good point. Email me at gifty74@comcast.net. I have a few with some shipping rub marks. Can send you one as a trial.

@coreyklippel6984

2 жыл бұрын

@Gifty74 will do Also check kzread.info5C5rMIMFHtM?feature=share

Hey there are you still making these ? If so will you send to Australia ??? Cheers 👍

@gifty7464

Жыл бұрын

Still making yes! Email me your address at gifste74@gmail.com and I’ll get you a quote. I think it’s usually $25-$30 shipping to AUS

@angusterrasson5480

Жыл бұрын

I have emailed you today . Cheers 🍻 Buddy 👍👍👍

@Crabman_87

7 ай бұрын

@@angusterrasson5480 did you end up getting them and fitting it all up?

I want to order both, have a link for that?

@gifty7464

2 жыл бұрын

Yes! Here is a link for the bezel & blockoff. $165 shipped. I have the bezels in gloss & textured black powder coat, and the blockoffs in textured only. paypal.me/gifty74/165

@jebusr1766

2 жыл бұрын

@@gifty7464 awesome, thank you! got my order in

Can I still order this and mail to the uk

@gifty7464

2 жыл бұрын

Hi! Yes, shipping is pretty crazy, but I can send it USPS. Email me at gifty74@comcast.net for details and a Paypal link. Still making them yes!

Are these still available?

@gifty7464

2 жыл бұрын

Yes they are! Got your payment overnight. Thanks! I’ll be getting it out early this week.

Hey ,can you ship kit to Australia

@gifty7464

2 жыл бұрын

Think so! I’ll get it quoted for shipping.

@angusterrasson5480

2 жыл бұрын

I’m in Australia too . How did you get on with it ? Cheers 👍

@gifty7464

2 жыл бұрын

Hey! Sent one over there a few weeks ago. Think it was about $30 in shipping.

Do you still have the link?

@themann713281

2 жыл бұрын

@@gifty7464 ok just placed the order thanks

@gifty7464

2 жыл бұрын

@@themann713281 cool! Yep, got it. Order is placed with the supplier, I’ll keep you posted on when I’ll receive and ship to you. Thx again.

@davidducharme1761

11 ай бұрын

Do you have a link for your bezel

what risers are those?

@gifty7464

6 ай бұрын

Basic 5.5” just to give it a little pullback.

@michaelvitiello6043

6 ай бұрын

@@gifty7464 how does the brake line and clutch cable feel? is there enough slack? i was thinking doing the same thing on my 22 lowrider

Are you still making these?

@gifty7464

2 жыл бұрын

Yes! Let me know what you need.

@bkress9638

2 жыл бұрын

What's the turn around time looking for gauge relocation. Do you have any pics of the block off plates?

@gifty7464

2 жыл бұрын

@@bkress9638 I just received a new order, ready to ship out as soon as tomorrow. If you email me I can send you some pics of the block offs, but they're very basic. Just a flat piece of steel powder coated, to cover the holes. Email is gifty74@comcast.net

Hey man! Awesome video. Just sent you an email if you are still making these interested I. Purchasing

@gifty7464

Жыл бұрын

Hi! Yes, still making them, have both textured & gloss black powder coated bezel plates available. Didn't see your email yet, can send to gifty74@comcast.net. Thanks!

@jikwag3415

Жыл бұрын

@@gifty7464 yes Ive sent it. I'll send it again!

@jikwag3415

Жыл бұрын

@Gifty74 check your junk mail too. Lmk what process you usually take for buyers to purchase your item. Thanks

@gifty7464

Жыл бұрын

@@jikwag3415 I did get your email and replied. Did you receive?

@jikwag3415

Жыл бұрын

@Gifty74 I did but I responded again asking for the link and did not get a respond yet!

Gifty74 do you have an Instagram ?

@gifty7464

2 жыл бұрын

No, not currently