Guys - extremely thorough and back to basics. Nice to see how repetitive and consistent you guys are. From our local to yours take care and stay safe!!
@AndrewZonenberg4 жыл бұрын
My unit just switched away from brake bars and a separate prusik/pulley based lift system. We're now using the CMC Rescue MPD which looks to be a massive improvement - less gear to learn how to use, less weight in the rope bag, and no need to reconfigure the system to switch from lowering to raising.
@cgunter702
4 жыл бұрын
You should look at the Petzl Maestro and/or CMC clutch. Game changer in the rescue world. Much easier to use then the MPD and cheaper.
@nickmorrow18383 жыл бұрын
"And I am aware in fact this is not a tree" 😂😂😂
@aafrojoose
Жыл бұрын
Lol I laughed at that too!😂
@gmangman3867 Жыл бұрын
I love that Will Forte made a guest appearance.
@jamesstephenson7493 жыл бұрын
Gunshot?Goose down? @12:40 😂
@dmanchola855 жыл бұрын
great video guys!
@naifsaeed65172 жыл бұрын
awesome training scenario by great instructors .. well done guys
@gregghecathorn39235 жыл бұрын
Great job
@raphaelbeinhauer92425 жыл бұрын
Do you have any credible source for using a pull two method on a tensionless hitch? That does not seem safe to me at all.
@Kojak4413
3 жыл бұрын
Stumbled upon this video and heard the same thing. Negative. Wrap 3 pull 2 is for anchors used with webbing secured with a water knot and overhand safety knots. The anchor object should be at least 4 times the diameter of the rope and wrapped as many times as needed to create the friction necessary to prevent slippage. You should never pull two pieces of rope in a tensionless hitch and use as an anchor point, while it may work, it is not best practice. Then a figure 8 follow through should go around the rope so if it does slip, it will secure to the hitch. Good way to test the anchor is to load the system with firefighters pulling on the rope with more people/weight than the amount of rescuer(s) and victim(s) going on that rope.
@leifjarvie51094 жыл бұрын
Full angle rescue training!😤
@pazen225 жыл бұрын
very good.. thanks .
@shabeerhussain31345 жыл бұрын
I wanna to be a part of your training
@gilbertgalvan46346 жыл бұрын
Fantastic Boys
@giuseppesprovieri4164 жыл бұрын
Hi, I'm an Italian firefighter. sorry my english.I'm an alpine caving river rescuer. looking at your maneuver I saw that you are not using safety ropes. Is it a procedure or did you omit it just to show the maneuver? Thanks!
@raymondmenard5472
4 жыл бұрын
Curious as well. Though in true low angle situation the rigging is the safety line and shouldn't at any point be bearing the weight of the rescuer or one being saved.
Пікірлер: 19
Guys - extremely thorough and back to basics. Nice to see how repetitive and consistent you guys are. From our local to yours take care and stay safe!!
My unit just switched away from brake bars and a separate prusik/pulley based lift system. We're now using the CMC Rescue MPD which looks to be a massive improvement - less gear to learn how to use, less weight in the rope bag, and no need to reconfigure the system to switch from lowering to raising.
@cgunter702
4 жыл бұрын
You should look at the Petzl Maestro and/or CMC clutch. Game changer in the rescue world. Much easier to use then the MPD and cheaper.
"And I am aware in fact this is not a tree" 😂😂😂
@aafrojoose
Жыл бұрын
Lol I laughed at that too!😂
I love that Will Forte made a guest appearance.
Gunshot?Goose down? @12:40 😂
great video guys!
awesome training scenario by great instructors .. well done guys
Great job
Do you have any credible source for using a pull two method on a tensionless hitch? That does not seem safe to me at all.
@Kojak4413
3 жыл бұрын
Stumbled upon this video and heard the same thing. Negative. Wrap 3 pull 2 is for anchors used with webbing secured with a water knot and overhand safety knots. The anchor object should be at least 4 times the diameter of the rope and wrapped as many times as needed to create the friction necessary to prevent slippage. You should never pull two pieces of rope in a tensionless hitch and use as an anchor point, while it may work, it is not best practice. Then a figure 8 follow through should go around the rope so if it does slip, it will secure to the hitch. Good way to test the anchor is to load the system with firefighters pulling on the rope with more people/weight than the amount of rescuer(s) and victim(s) going on that rope.
Full angle rescue training!😤
very good.. thanks .
I wanna to be a part of your training
Fantastic Boys
Hi, I'm an Italian firefighter. sorry my english.I'm an alpine caving river rescuer. looking at your maneuver I saw that you are not using safety ropes. Is it a procedure or did you omit it just to show the maneuver? Thanks!
@raymondmenard5472
4 жыл бұрын
Curious as well. Though in true low angle situation the rigging is the safety line and shouldn't at any point be bearing the weight of the rescuer or one being saved.
Too bad audio.