I have the mighty mites on my Ultra - Love them! and the support I have received from Love Jugs has always been TOP NOTCH! Highly recommend this!

@amsoiladam

2 жыл бұрын

Thank you JD

If you change your plug wires you have to go with the HD wires. They are the only ones (I know of) that are compatible with the ion sensor in the electronic ignition

I had the Mighty Mites on my 2012 Street Glide until one of the fans burned out 2 years ago. I loved them while they worked. I now have a 2019 Tri Glide that is twin cooled and came with a fan mounted behind the jugs. I will consider them in the future.

@amsoiladam

Жыл бұрын

Congratulations on the upgrade, sir, I do want to stay through that the love Jugs will still be hugely beneficial on that motorcycle. The fan that is mounted behind the engine between your legs. It’s pretty much useless, it doesn’t actually cool the engine it was just designed to pull the pocket of hot air away from your leg, so it does add a little bit to rider comfort, but it doesn’t fix the overheating problem. The twin cooled system can’t always keep up because it has such a small amount of coolant so the Lovejugs make it so much more efficient. They work great in conjunction together.

@NKBobcat

Жыл бұрын

@@amsoiladam I will be getting them. Thank you!

Got a set installed during laconia and everything seemed to work great even my ride up to Canada , but this week has been a scorcher here in Mass and I put them To the test of Hampton beach stop and go traffic and well the oil light started to flicker so to avoid any issues I slowly pushed forward, so now it’s got me rethinking these things . I’m going to test them again and see if it was me maybe my knee blocking the air flow in but we will see

@amsoiladam

Ай бұрын

Remember Harleys, don’t need very much oil pressure to run because of a roller bearing bottom end. Imagine how bad it would be without airflow. Maybe you’re due for an oil change as well.

@paivasteveable

Ай бұрын

@@amsoiladam this could be true i didn’t think of checking the level since I got back from Canada with her , but other than that she’s running great , gonna check probably owner error. Will keep you updated. Thanks again

Great info Adam. I have a set on my 2016 fat boy they work fantastic would highly recommend them. And always keep up on all your great videos. 👍

Thankyou Sir for all the information and Option for Sportster Family Harleys

@amsoiladam

2 күн бұрын

Always welcome

Thanks for bringing us along. Enjoyed the tour of Juneau.

@amsoiladam

11 ай бұрын

Glad you enjoyed it

My original mighty mites are great!

@amsoiladam

Ай бұрын

Glad to hear it

Greatly info thanks Adam.

great knowledge of Harley Davidson. great video!

@amsoiladam

2 жыл бұрын

Thank you

@markjaycox8811

2 жыл бұрын

@@amsoiladam Everything is great when you have a 5 lb. ribeye roast cooking and smelling up the damn place, don't you know? We can agree 100 percent on rib roast can't we?

@amsoiladam

2 жыл бұрын

@@markjaycox8811 yes

Very informative video. Thanks!

Excellent presentation and very informative! Thank you!

The James copper exhaust gaskets work a 💯 percent better than the original one's...

Amsoil A., With a dual-cooled M8 the area you're covering is already pretty well handled by the water pump system. My Road Glide easily stays under 200 degrees even when the fans in the lowers are called-on. Engine temp, however runs between 245 and 285. Wouldn't it really do more good on these engines to locate the fans a bit lower to assist natural airflow over the cylinder fins?

@amsoiladam

2 жыл бұрын

Allen, I can agree with you in Theory, The dual cool system does have its benefits however the limited capacity of coolant that is used to cool only the heads isn’t enough in all situations. Yes it does help in minor stop and go traffic, but let’s look at this realistically. Harley Davidson took an engine that was designed to be an air cooled engine, then added some cooling passages into the head to run water through. Hence the “dual cool”. It is not a true liquid cooled engine. It is an air cooled engine at heart. Adding the Lovejugs even on the dual cooled engine makes a huge difference. Many of our customers say that adding the Love Jugs to their dual cooled engine keeps the engine cool enough that the radiator fans very rarely ever even turn on. Lowering the fans believe it or not wouldn’t help as much as you would think. Lovejugs are directing the volume of air right at the combustion chamber. This is where the heat is actually created at the source. If we keep that area as cool as possible it minimizes the heat transfer to the rest of the engine. Many people suggest to us to put fans here and there and change positioning in one way or another, but the truth is we have thousands of hours into research and development into the proper placement of our product. We have tested things that we even knew wouldn’t work to start with just to verify that they wouldn’t work. Our end product is the absolute best they can possibly be with science and data to back it up and prove it.

@lonniedugan6120

Жыл бұрын

Nope

Hey Adam, it was nice meeting you in New Hampshire. I am one of thousands I am sure. Anyway, I have an 11 Ultra. What options do I have to power the Love Jugs OTHER than the ACC line? I ask for two reasons; 1. Don't I want the LJ running at all times? The ACC is a switch on the dash, which would then need to be on at all times, no? I would prefer to hard-wire the LJugs, especially if their going to be running all the the time. 2, I might want something else wired to the ACC switch, although I don't know what yet. Oh, and what's that primary oil for tourers that John from CycleFanatix picked up? I wanted to give that a go.

@amsoiladam

2 жыл бұрын

The primary fluid is simply labeled “Primary fluid”, and he used for 75 /140 severe gear in the transmission. In most cases on your motorcycle we just plug into the accessory plug under your seat. The way the Lovejugs are currently wired the switch on your dash will activate them. If you do not want that switch on the dash to activate them there is another wire in that plug that is key on only power but not through the dash switch. All you have to do is move the red wire in the Lovejugs plug catty corner to facilitate that.

@twowheelboomer

2 жыл бұрын

@@amsoiladam Yes, transmission. I'm sorry.

Installed the love jugs over a month ago because of amsoil Adam. Thanks brother.

Hi Adam, it simple and clear presentation, I had 2019 RG ultra, I like the design of mity might is it ok for my bike, and if the fan works continuously may will failed sooner, there is any kind of motor easy replacement that can be kept

@amsoiladam

Жыл бұрын

Yes the mighty mites will work great on that motorcycle, I also recommend the three pin wire harness adapter which should make your wiring nice and easy assuming that you’re not already using that plug on your motorcycle. And yes Love Jugs are designed for all of the parts to be easily replaced in case of failure. However failures are rare and yes we recommend that you run them at all times when the engine is running

PLEASE offer a set of mighty mites for a Thunderstroke engine!!

Adam, been watching a lot of yuour videos, great content. I have a question, on a 22 Trike with the HD Coolflow fan (that sits behind the engine and pulls air away and down away from the engine), is there any benefit to also adding the Love Jugs? I'm just trying to maximize cooling.

@amsoiladam

Жыл бұрын

Yes there’s a huge benefit. The Harley Davidson cool flow fan does not cool the engine it is simply there for rider comfort. Its purpose is to take the pocket of hot air that’s produced by the engine and move it away from you. I’m not saying this has zero effect on engine cooling but that’s not its purpose and it is not effective. Love Jugs focuses a massive amount of airflow strategically to where the source of the heat on the engine is. Carrying the heat away from the hottest parts of the engine keeps the engine running hundreds of degrees cooler at idle.

Great Info...Thanks

2 questions 1. Do the fans run all the time or are you reading temperature from CAN bus or on older models with no CAN bus do you have a temperature probe to detect when to run fans? 2. How many CFMs do the models put out and what data can you share showing the effects?

@amsoiladam

Жыл бұрын

We recommend that you run the fans whenever the engine is running. The more airflow you can provide the better the engine will run. My bike is not can bus so I have a manual, air cooled cylinder, head temperature sensor with a thermal coupler mounted below the spark plug base. This is the most accurate way to measure cylinder, head temperature and it does not lie to you like the OEM temperature sensor does. Figured you would ask for the CFM. No one has asked for that in so long I honestly don’t remember the answer. But it is more than sufficient to do the job. I can assure you that. And yes, eight years of running this motorcycle at idle I think it’s pretty good results.

@revealingfacts4all

Жыл бұрын

@@amsoiladam thank you, very interested in getting a set.

yea everything is good as long as you have 500 dollar bill in your pocket

@amsoiladam

4 ай бұрын

Quality and performance doesn’t come cheap. But it’s still cheap insurance protecting investment of a Harley Davidson.

Very doubtful lovejugs will help much if any.

@amsoiladam

Жыл бұрын

How do you figure that. It is impossible for an air cooled Engine to not run cooler with airflow then without. Watch more of my videos you will see there’s a huge difference, huge every single Harley Davidson out there should have these

@armedfarm3429

Жыл бұрын

Yep , It's a load of crap made to take money from people that don't know any better.

Hi Adam, I’m in the UK,my wife and I love your channel. I want love jugs for my 2020 Street Bob, can I buy direct from you? Cheers Jeff and Fi 😊

@amsoiladam

Жыл бұрын

Yes, you can purchase them from my website, obviously they’ll be some additional shipping fees to get it over the pond. X-tremebikes.com

I have a question for you and I don't normally like asking salesman as I am a sales guy and know how it goes asking the one that represents the product. But, I feel you are honest and truthful!!! Do yiu feel my 2004 RK would benefit from these love jugs? TIA... love your content by the way.🤙🏽

@amsoiladam

2 жыл бұрын

Of course they would A huge benefit. the bike I run all day long is a 2004 Road King. Every Harley benefits from this. We are simply throwing air at an air cooled motor there’s no way it cannot work.

Just watched a video on them ad at a idle temp went up didn't help cooling atvall

@amsoiladam

11 ай бұрын

Not true at all

I have a 2024 twin cooled street glide. Do you any fans/mounts that will work for my application?

@amsoiladam

Ай бұрын

I am still working designs for the newer engines with the ignition coil on the left side as opposed to the horn. I have them currently for the softail units, but not for the touring models yet.

@cjangula77

Ай бұрын

@@amsoiladam Thank you.

Sounds like you are a solution to a big design flaw.

@amsoiladam

Жыл бұрын

Very true

@johnflesner8086

Жыл бұрын

@@amsoiladam Sir, do you have an opinion on the relative merits of the Indian scout comfort seat VS the solo syndicate seat?

@amsoiladam

Жыл бұрын

@@johnflesner8086 i’m really not familiar with either

Wouldn't it be better to have the fans reversed to pull the heat away from the heads instead of blowing hot air onto them

@amsoiladam

3 ай бұрын

Actually, it is way more efficient to force the air at the heads. When trying to draw heat away from an item, you would have to shroud the entire engine in a box for the work and nobody would want to do that. That’s why radiators on cars have shrouds around the fans to force the air to come through the radiator rather than around it.

I would like to install on a 2018 Harley Davidson Deluxe. How is the mount for this style?

@amsoiladam

10 ай бұрын

We have a specific model design for the 2018 and a newer, softail line that is powered by the Milwaukee eight engine

@rodrigogonzalezjr8602

10 ай бұрын

@@amsoiladam where can I see how it looks installed? I am scheduling my trike for the Lone Star rally and thinking about doing my Deluxe also

@amsoiladam

9 ай бұрын

@@rodrigogonzalezjr8602 if you go back about two years, there’s a video I made down at Brandon Harley Davidson in Florida when they allowed me to do an install on one of the floor models

Need a set for my 106 Victory....

@amsoiladam

Жыл бұрын

I can make that happen!

@davidvanbrunt4233

Жыл бұрын

@amsoiladam ok, I'm interested .tell me more !

@davidvanbrunt4233

Жыл бұрын

@amsoiladam ok, I'm in....set me up with mounting and wiring for my 2015 Victory cross country tour !!! The cool masters.....

@davidvanbrunt4233

Жыл бұрын

@@amsoiladam chrome !!!

@amsoiladam

Жыл бұрын

@@davidvanbrunt4233 email me x-tremebikes@hotmail.com

I have the Love Jugs on my twin cam Fatboy work brilliantly,a guy RealRonTV has tested a set on his Harley Davidson and says they don't work which I can't fathom out check out his video on his channel you maybe able to help him out.

@amsoiladam

2 жыл бұрын

I will

@amsoiladam

2 жыл бұрын

I look at his channel I couldn’t find anything motorcycle related. Just about cigars and shave butter.. Can you send me a link to the specific video

@RobertB56

2 жыл бұрын

@@amsoiladam kzread.info/dash/bejne/pWyZtMavaarNn84.html

I Have a 2018 road glide special want to use my diagnostic port I have a love jugs minis which cable do I need and where do I find this cable so I can purchase it Thanks again

@amsoiladam

2 жыл бұрын

Your DLC is a six pin, so you will need the six pin adapter

Do you offer a button switch on the handlebars? Would be a nice toggle

@amsoiladam

8 ай бұрын

We do not, every Love Jugs unit already has a switch built into it. And Harley Davidson makes a kit for certain models to put an accessory switch up on your dash.

Hi adam I am considering having you guys install the jugs on my 16 sgs. What's a ball park fee on installation?

@amsoiladam

5 ай бұрын

I only charge $85 to do the installation.

@felixjimenez4482

5 ай бұрын

Thanks Adam see you soon

Would it fit on Royal Enfield Interceptor? New rider here....I'm guessing my engine would be too small for this product. It's already has a mounted oil cooler, just thought I could add even more cooling capabilities.

@amsoiladam

2 жыл бұрын

Heading airflow will most likely be a huge benefit however I’ve never had the opportunity to try to fit anything on the royal Enfield before

I would like a set how can i buy them i thought i had you web site but i cant find it would like a shirt maybe two of the mighty meal black for 2022 Road Glide and A 2023 Low Rider ST

@amsoiladam

8 ай бұрын

Go ahead and take a look at the website. If you have any other questions just send me an email. x-tremebikes.com

Even though my 2015 Electra Glide Ultra Limited Low is liquid cooled. Would it hurt to still add the love Jug system to for extra cooling? I can’t take my lowers off.

@amsoiladam

Жыл бұрын

Not only would it not hurt it would actually be a huge benefit and keep it running much cooler. Believe it or not Love Jugs are far more effective than the liquid cooled heads

I have a 2016 road glide I want to know what I need

@amsoiladam

Жыл бұрын

You can choose whatever model of jokes you think will fit your bike the best, on a 2016. You will also need an eight pin, wiring, harness adapter, and a frame mounting kit.

I'm assuming they won't fit my 2016 FXDLS since it doesn't have a horn on the left..?

@amsoiladam

2 жыл бұрын

We can make it work

Do you have proof or pilot study that your Love Jugs really manage engine temps and why is not not temp trigger if engine is getting hot?

@amsoiladam

Жыл бұрын

Yes we’ve got more than 4000 hours of testing. But to keep it simple it’s common sense if you throw air at an air cooled motor it will run cooler than if you do not throw air at it plain and simple. If you watch any of my other KZread videos when we were at rally you will see that I allow my personal motorcycle to idol for anywhere between eight and 18 hours per day and it never overheats. There are too many downsides to thermostat switches in this application. One it does complicate the wiring and requires the use of a relay to do properly. They are very unreliable because the quality of what’s available just isn’t very good. And then the main reason I don’t like them is because it allows the engine to start to get hot and then it tries to cool it back down. It’s better to just not let it get that high.

I bought these and installed then 9 months ago …. Front motor stopped running? Is this common? Am I out 550$ ???

@amsoiladam

Жыл бұрын

You should still be under warranty if you purchased them 9 months ago. Email me with a copy of your receipt to adam@love-jugs.com

​ Last thing, I saw in one of your videos from a couple years ago (or the manufacturer video) that stated the Love Juggs will NOT fit (to a trike in my case) with the Custom Dynamics Pro Beast horn. Is that still the case? Is there an adapter we can use to make it work? Again, thank you for helping me with my questions.

@amsoiladam

Жыл бұрын

Can you send me a picture of what a pro beast horn looks like, I don’t recall. If it’s the big oval one the no there’s nothing I can do to make it work and still looks good anyways

@BrknRidr10317

Жыл бұрын

@@amsoiladam Thank you however, I see you sell the mini banshee, that will work just fine and gives me more options. See you later this week!

@amsoiladam

Жыл бұрын

@@BrknRidr10317 yes the mini banshee will fit underneath the OEM horn cover. Which means it will all work just fine with love jugs

Cools the left not the right side will the uneven cooling cause your jugs to warp and cause cylinder damage????

@amsoiladam

Жыл бұрын

Not at all, airflow is focused at the source of the heat, slowing the spread

@danfecke

Жыл бұрын

If that were the case, they would warp from riding into the wind.

@stratolestele7611

6 ай бұрын

Funny question @john! 😂

I have a 2005 Harley sportster and I have always used amsoil. My question to you is how often I should change the oil?

@amsoiladam

2 жыл бұрын

On a Harley Davidson you got 10,000 miles or one year which ever comes first

Hi Adam, iit was fun running into you at the MN renaissance. Do you have a piggyback plug? My 08 is set up for a heated seat

@amsoiladam

2 жыл бұрын

You can get a Y splitter to run multiple accessory’s off of the same circuit however it’s not something that I currently offer. I ran out of stock and getting new stock has been very difficult lately. You should really buy it through your Harley dealer and even like JP cycles

hey Adam i have a turbo road glide 2018. where can i go to order from you? Love jugs and oil

@amsoiladam

Жыл бұрын

You can order everything directly from our website if you cannot find us at a rally. X-tremebikes.com

Hi Adam I have a 2009 Indian Roadmaster (105cc) This bike was built in Kings Mountain NC (before 2014 some came out of CA). Will the love jugs work on this bike?

@amsoiladam

2 жыл бұрын

Maybe with some modification, I have never tried to install Love Jugs yet on a pre-Polaris Indian

What's the average temperature drop of the heads using the love jugs

@amsoiladam

2 жыл бұрын

We advertise 100° drop at idle. But I have actually measured up to 250° drop in many cases.

How much would it cost for a 99' Harley Fatboy?

@amsoiladam

Жыл бұрын

Each model has a different price points. You would have to decide which one you want before I give you a price

Wait! These aren't the love jugs im used to seeing 🤩

@amsoiladam

Жыл бұрын

Lol!

Have a 2017 CVO limited, 128 stage IV 550 cam has a good vibration. Would like to install the love jugs. What mount?

@amsoiladam

2 жыл бұрын

On 2017 and newer touring model she do not need any additional mounts, however I do recommend the three pin wire harness adapter.

@amsoiladam

2 жыл бұрын

@Dick Weed If you only wanted to last a couple of days maybe.

What will work for my 2016 Harley Davidson Sportster 48?

@amsoiladam

2 жыл бұрын

I recommend the mighty mites simply because they look better on the smaller engine. And sometimes you’ll have to use a modified mounting bracket.

@RickyBobby8711

2 жыл бұрын

@@amsoiladam ok great thank you My engine is a XL1200X not a small engine at all. Would you be able to send a link for that product?

@amsoiladam

2 жыл бұрын

@@RickyBobby8711 Well when it comes to the XL motors yes you have the larger one! But the XL line is considerably physically smaller than the big Twin series like the evolutions, twin cams and Milwaukee eights. They are physically much larger engines as well as having considerably more displacement.

Do you recommend for a 2022 Triglide ultra that is liquid cooled?

@amsoiladam

11 ай бұрын

Yes definitely

@rodrigogonzalezjr8602

11 ай бұрын

@@amsoiladam I would like to set up to have some installed at the rally in Galveston if possible

@amsoiladam

11 ай бұрын

@@rodrigogonzalezjr8602 if you go to the website, you can actually make an appointment during one of the Rally days. And in the notes you can make a list of exactly what items you want. It will take a $50 deposit to hold the spots and the product. x-tremebikes.com/2023-events/

@rodrigogonzalezjr8602

11 ай бұрын

@@amsoiladam thank you I will definitely do that. I would like them to activate off one of my auxiliary switches. Do I need to purchase that ahead of time or do you carry them?

@amsoiladam

11 ай бұрын

@@rodrigogonzalezjr8602 I do not carry the switches or switch panels for the motorcycle. The adapter that I use will plug into the accessory circuit and only allow Power to go to the fans when the motorcycle is powered on, which basically makes them someone automatic. There’s really no reason for the extra switch but if that’s the way you want to do it just purchase the switch kit through your dealer that accommodates a four pin Deutsch connector.

Just bought a set of Love jugs for my 2011 Softail deluxe and my question is would I need to have that vibration adjuster?

@amsoiladam

2 жыл бұрын

No the softtails are counter balanced engines and the origind mountain so the vibration is already minimal

@buster1173

2 жыл бұрын

@@amsoiladam I put it on the bike and it works great but I have a question for you I noticed that you sell Chrome fan covers, what about the black ones I think I might want to change mine to Black.

@amsoiladam

2 жыл бұрын

@@buster1173 I believe that all I have available at the moment or the chrome covers

@buster1173

2 жыл бұрын

@@amsoiladam I did look on their website it wasn't on before but now I noticed that they do have them they might be out of stock but I could check with JP's down the block about 20 miles from me but it's down the block

Do they blow the hot air to the right side of the bike onto your right leg?

@amsoiladam

Жыл бұрын

They do move air from the left to the right however, there’s always hot air on your right leg anyways. With Lovejugs running the air is not as hot.

@rykerolaoghaire8781

Жыл бұрын

They certainly do on my 103 softail but that just means they are doing their job in my opinion. I'd rather have a hot leg than cooking my engine. They make a huge difference and I measure the Temps on my FP3 tuner.

What model you need for 2018 Indian Chieftain Limited

@amsoiladam

2 жыл бұрын

For the Indian we only make the coolmaster version, It is available in the polish stainless steel flat black and gloss black

Hello. Adam I live in Santa Clara California And i ride 2015 road glide Which is best for me Thanks

@amsoiladam

2 жыл бұрын

We have seven different models that will work in your motorcycle, it’s up to you what you think would look the best

Will you be in Daytona ? And do you install on site?

@amsoiladam

2 жыл бұрын

Yes we will be set up at the speedway

Adam, these love jugs are unavailable everywhere, i.e. jp cycles, dennis kirk etc...when will they be available? Or do you have an online store for customers too purchase? Thanks....

@amsoiladam

Жыл бұрын

I have just about everything in stock. x-tremebikes.com

Any insight into the availability/inventory of the Love Jugs products? The website looks sparse.

@amsoiladam

2 жыл бұрын

And give me some time and I will check our total inventory levels

@brianmoran8937

2 жыл бұрын

Well I took the bait almost 500 bucks from dennis kirk Mounted on 2010 RG Now my jugs might get cooler but my right legs is on fire and yes I have guards ,heatsheilds,etc, so in all reality I purchased a 500 heater !!

@classicrider103

2 жыл бұрын

@@brianmoran8937 thanks for your input. I was wondering if there were any "side effects".

@brianmoran8937

Жыл бұрын

@@classicrider103 I rode with them for a month still believe the would work better for the rider if the fans worked in the opposite direction, as of now justa$500 leg burner !

Hey Adam, I have a 2011 Road glide SE CVO Ultra with a 110 Twin Cam with a stage 2 the majority of heat comes from the Catalytic Converter on the right side of the bike will the Love Jugs help?

@amsoiladam

2 жыл бұрын

Yes they will still help, it’s going to eliminate the engine from overheating however your catalytic converter is still going emit some heat.

I have a heritage 2020 107 classic looking to get the love jugs from you installed in Galveston Texas about how much do I need to save up either chrome or the gun chrome

@amsoiladam

2 жыл бұрын

You’d likely be somewhere around $500 plus tax.

@jameslaperouse3976

2 жыл бұрын

@@amsoiladam Cool will it Done in Galveston probably Friday morning

👍👍

My 2015 Breakout has a grenade style ignition on the left side. Am I not able to use this product?

@amsoiladam

2 жыл бұрын

I have done it on your model motorcycle before however it does take some modifications because it is not a direct fitment

@luisoutumuro424

2 жыл бұрын

Ditto. I have a 2008 H-D Rocker C (softail), with the grenade style ignition on the left side (like the Breakout). I very much in need of the Mighty-Mites. Are there any links to manuals or video for making the appropriate modifications? Thanks in advance.

@amsoiladam

2 жыл бұрын

@@luisoutumuro424 I don’t have any kind of manual but what I did is I took a set of the mighty mites and then I built a 90° bracket to hang off of the bolt that goes into the bottom of the hand grenade. And then I took the Mighty Mite an Mounted them upside down. I do have pictures but I don’t know how to share them with you

Amsoil Adam, Ball park how much for a touring Harley Ultra?

@amsoiladam

2 жыл бұрын

I assume you mean the service. We do the supreme where we change all three lubricants we charge 199+ tax

And do all kits have thermostats, is that better?

@amsoiladam

2 жыл бұрын

We do not recommend thermostats for multiple reasons. We suggested she run them whenever the engine is running. There is never a bad time to supply air to an air cooled motor.

We are about 2 hours out. We got caught in some traffic and had to stop.

@thebeardedguyjefflawless5887

2 жыл бұрын

What time did ya leave out? Sorry I missed you

@amsoiladam

2 жыл бұрын

@@thebeardedguyjefflawless5887 I am still down towards a Murrells Inlet we went out to get dinner but we have not left town yet. Message me on my phone it’s easier for me to get back to you faster. 828-342-5637

you failed to tell what to use on Indians

@amsoiladam

2 жыл бұрын

Because this video was geared towards the Harley Davison fitments. There will be another video specifically for Indian.

Can you tell me, or lead me to a page that will tell me, about the cost including having you install these at a rally?

@amsoiladam

Жыл бұрын

Tell me what model of Love Jugs you would like, and what motorcycle you wish to install them on and I can give you a quote. You can check out the various models on our website X-Tremebikes.com

@graybeardbiker

Жыл бұрын

@@amsoiladam well, I’m not sure how they compare. Polished of course but after that, there are a few things for me to consider- which model performs best and which are the least uncomfortable as far as being in the way…and how to prioritize between those two factors. My biggest concern is the heat that comes up the right side when in traffic… now I know these install horn side, something else to note is that I have the Willie g skull horn cover (you can see my bike on my channel), but I image it cools both sides to an extent just being on the engine as a whole. But maybe the original is better at it than the cool master or mighty mites? But maybe the smaller mighty mites are less of an annoyance as far as being “in the way” while riding… sorry, guess I have questions lol. My bike is a 2014 Road King. It’s actually in your Laconia video for a second..black, chrome, and copper.

@amsoiladam

Жыл бұрын

@@graybeardbiker the coolmaster is considered our most powerful and most durable version. And if your horn isn’t in your way, most likely, the Love Jugs won’t be either. We mount to the left side because that is where the spark plug enters the combustion chamber. That is the source of the heat. If you keep that area as well as the exhaust port, cool, it prevents excessive heat from traveling throughout the rest of the engine.

@graybeardbiker

Жыл бұрын

@@amsoiladam Sounds good. So quote me on that one. Hope Sturgis is going well for you. Will you be at Lake of the Ozarks?