I have 2 surpass hobby combos, it works well!!!! I use the same combo in my Losi Mini B, very cool and cheap set up!!!! Cheers from Le Mans, France

i bought the brushless version and had a hell of a time tuning it to not just flip everytime hitting it

@dimagass7801

Жыл бұрын

Have you tried getting a wheelie bar?

goog video🤩👍💯

nice man. I have the hobbywing 5200kv brushless system in mine, just the right amount of speed. I just ordered a mini b with the dynamite 2in1 and all of the mip upgrades too. Cant wait. Oh get some step pin tires for the rear makes a huge difference.

@thecollectorrc

3 жыл бұрын

My new tires arrived a couple days ago. 😉

@r.cbikefloyd5390

2 жыл бұрын

@@thecollectorrc I have a new transmitter and reciever having a hard time bonding the together how was bonding the esc with transmitter?

I recently got the Dynamite 25A mini esc and a HW 4500kv 380 brushless motor for my 1/18 Axial Yeti Jr Can-Am. It was alot more expensive than other comparable choices, but wound up being an excellent combo for the little Can-Am. 3s is just a little to much power for it(rated for 2 or 3s) so I'm ordering a couple of 2s packs to run in it. I would like to try it out in the Mini-T on 3s though, just because of the lower cg it has. It wound up being an awesome setup for the small scale rc vehicles and I will definitely be buying another one for a different project. Good video.

@thecollectorrc

3 жыл бұрын

We've been eyeballing those Yeti Jr. We'll more than likely have one soon on our channel.

@shadow7796

3 жыл бұрын

@@thecollectorrc be warned, it rolls alot, especially on asphalt. Replacing the suspension links and control arms with aluminum parts and locking the rear diff helps quite a bit. Mine is extremely fast on open dirt and doesn't flip nearly as much now, even on the stock tires. I'm even thinking of trying a set of aluminum wheels and 1.55 tires to see if that helps a little more. Don't get me wrong, it's a great rc, and I'm glad I got it, it just takes time to get used to the higher center of gravity. GPM and Hot Racing makes alot of aluminum replacement parts for the Yeti jr.

I just got the upgraded slipper clutch however no matter how tight i put it, it slips and the car barely even moves. I switched back to the stock slipper, but even that now slips no matter how tight it is. I’m not sure what to do

Will upgrading the mini t be a series? I just got one and would love to see some guides on what to do for upgrades

@thecollectorrc

3 жыл бұрын

We are currently doing a mini series on them.

Ive noticed that the stock pinion gear wont properly fit on this motor, is there any solution to this?

Awesome video!! I bought the same setup for my deerc 1/18 monster truck how do you go up on the punch setting?? Do I need the card??

@thecollectorrc

2 жыл бұрын

I believe so, but I think there's a "program" option with the power button as well.

What is the battery connection type comming from esc?

@thecollectorrc

3 жыл бұрын

That would be the Deans connector.

Am I able to pair my losi mini t 2.0 controller to the ecs I bought this motor and ecs but idk how to get my controller to connect or will I have to buy a different one and if so what kind

@thecollectorrc

Жыл бұрын

No you'll need a Transmitter/Receiver replacement unfortunately.

what remote are you currently using?

@thecollectorrc

2 жыл бұрын

It'll be the Flysky gt3b i believe. Right now its on the bench waiting.

where can you get the upgrades?

@thecollectorrc

2 жыл бұрын

Amazon or some local RC shops carry the setup. Amazon is your best bet.

was this on 2 or 3s lipo sir ?

@thecollectorrc

2 жыл бұрын

Upgraded 2s lipo, 1500mAh. The upgraded motor and ESC was only rated for 2s. 😁

How do you set throttle endpoints??

@thecollectorrc

2 жыл бұрын

Well I'd need to find my stock Receiver/Transmitter to take a look, but during this video I was using a Flysky GT3B I think and that has all the settings you need displayed on an LCD screen. I assume you want to limit it's speed for better control, or are you having issues with idling/brake/throttle points?

@travisdrury5556

2 жыл бұрын

@@thecollectorrc i just wanna make sure im getting full throttle but no button on esc like most to set

hey man im local to you and notice you are into alot of the same stuff im into as far as mini rc goes. we should meet up sometime and maybe set up some cones or something in a empty parking lot.

@thecollectorrc

3 жыл бұрын

Are you a member of the Pacific Northwest Trail RC (P.N.W.T.RC) or a member of the Pacific Northwest Crawlers group? I highly recommend P.N.W.T.RC if you're more on the western side of WA.

@markus8834

3 жыл бұрын

@@thecollectorrc yessir i am

@thecollectorrc

3 жыл бұрын

Have you participated in any of the events? What about the Green River camp in August, you going?

@markus8834

3 жыл бұрын

@@thecollectorrc i have not yet. i tend to stay local and my baby is due in august so i will be probably taking the rest of the year off after that.

@thecollectorrc

3 жыл бұрын

Well then we'll definitely have to set something up for you to get some RC in. My names Robert J. I'm a moderator in the PNWTRC group. You should find me and reach out and we'll plan a meeting here in the near future. Even if that means a parking lot 😁.

Do you have a link to that battery?

@thecollectorrc

2 жыл бұрын

I don't think I have it saved but I'll check my folders.

@ericwilson7949

2 жыл бұрын

@@thecollectorrc i actually found it! Just ordered them. By chance im actually doing this exact same build

Mine rips,,

Cool little truck Nice work looks good check out my latest video see my collection 😀

Can I run a brushless motor with the stock esc?

@thecollectorrc

Жыл бұрын

Unfortunately no you can not.

@giveML

Жыл бұрын

@@thecollectorrc there is a 3300kV version of the 2435 rated at 18A and the stock ESC is 20A, will that fit? I'm new to the hobby, what else am I missing

@thecollectorrc

Жыл бұрын

You're going to need to get an ESC that can run brushless. They are different. It's more based on the electronics not the amps.

@giveML

Жыл бұрын

@@thecollectorrc got it, thanks for the help