I never would have thought to try hairspray. Very creative!!

@rcguygarage

2 жыл бұрын

MX bike grip installer🤔😳💥

I’ve never tried hair spray on wheels sounds good tho thanks 🙏 I learned a new trick 💪💪🔥🔥👍👍👍

Those rims snap so easy

We used to use hairspray to put motorcycles grips on wow awesome trick to use it on again 👏👏👍

@rcguygarage

2 жыл бұрын

Yes when I was a kid it was for my BMX grips

That robot on the desk brilliant 🤣

@rcguygarage

4 жыл бұрын

They ARE a riot! 😝😂😜🤣👍💯👊

@paulpreston4871

Жыл бұрын

Can you please tell me where to get one of those robots, that things is awesome. Great video BTW!!

That's a pretty good idea I'm going to have to try it next time I have to do wheels on my losi

@rcguygarage

4 жыл бұрын

Awesome! Just allows the tire to slip into position then seals when dry.

I just did this with my TRX4 wheels, except they are 32 screws each. Lol. The foams grew 3 times larger than they were when new but overall still in good shape. The tires themselves has a little bit of a stretch to them as well and were a bugger to get back together. I actually washed the foams while I was at it (hand washed, not machine) because they were loaded up with swamp water. One wheel specifically took 3 tries to get it together right. Definitely weren't that hard to install when everything was new. I just ordered another set of tires for the TRX4 and I'll be doing it all over again with one of my other sets of wheels. I've only put together 2 sets of 1/5 scale wheels since I've been in the hobby and neither of which was hard at all.

Great thank you 🙏 I do to many times lol not 😆 thank you so much 👍

Hello , can you do a video explaining a factory carburetor settings , need to put the needle 1 7/8 high speed and for low speed 1 3/8 I don’t know how

I always cover the hole on the inside of the rim with some duct tape en drill 2 small holes on the outside of the tyre. This way, the water and sand can get out of the tyre.

@rcguygarage

4 жыл бұрын

UDR method ABSOLUTELY 👍💯👊

Here we go with the hairspray again 😂😂😂

@rcguygarage

4 жыл бұрын

Hairspray nation

nice video what is that little robot thing and where can i get one

@rcguygarage

Жыл бұрын

I wouldn't. The new ones aren't worth it and the original company was bought out.

Very cool the only issue I had with mine was the screws some were rounded off. I had to mine apart I noticed one side of the tire was coming off. I just did a speed run with my DBXL-E 2.0.

@rcguygarage

4 жыл бұрын

What did you get for numbers? Dirt, grass or pavement???

@gofastg80

4 жыл бұрын

RC Guy Garage pavement I posted it on my channel. I ran my Kraton 8S too. 17T pinion on the DBXL-E 2.0 and 25T Piñon on the kraton. I did it last night. 56MPH DBLX letting off early and 53.6MPH on the Kraton.

@rcguygarage

4 жыл бұрын

@@gofastg80 Jesus!!!!!!!!!!!!! NICE!!!!!!!!

@gofastg80

4 жыл бұрын

RC Guy Garage 🙏🏻

In aliexpress i found a motor of 1520kv 10S!!! to get 125 km/h with pinion 24T to your Losi 1/5. How many is the differencial more little to Losi 1/5? Regards

is there some other benefit to hairspray other then lube i would imagine any stickyness gained would be gone first time it got wet. Would say soapy water or wd40 work as well you think?

@rcguygarage

3 жыл бұрын

Right unless your not running the dune buggy in the sand👍💯👊

You wonder why the foam was wet . Hairspray !

@rcguygarage

3 жыл бұрын

🤔

So in terms of residue, does the hairspray leave it sticky?

@rcguygarage

4 жыл бұрын

Dries but easily washes off with water if your concerned.

Just a quick question on the Losi DBXL-E 2.0, what is the longest run time you've ever gotten from it, and is it worth getting the Losi over the Xmaxx in terms of run time ?

@rcguygarage

4 жыл бұрын

Well😜😝🤣😂i did actually RUN it for about 32 minutes and 12 miles!!! I think either way both vehicles are going to eat batteries because of what they are and what you do to them the dbxl is more of a Performance Tuned vehicle so you may be eating the battery a little bit more because it's weight but it is a blast to drive. I've also known people that have the xmaxx that like the dbxl better because it is a completely different drive.

@damics1969

4 жыл бұрын

Thank you so much for the fast reply, I have decided to go with the Losi, I just love the size and looks of it when it's on the move, I really love it, One owner noticed water getting into the receiver box because there's no sealer around the wire hole, don't know if you noticed that, but the guy had to replace the receiver and seal the hole.

My problem with these wheels is balance they vibrate at high speed really bad it can't be good for bearings or diffs

Hahahahaaaaa the beginning video said guru! Hahhahahahhahahahaaaaa

@rcguygarage

4 жыл бұрын

GURU GARAGE BABY

@MetzRc84

4 жыл бұрын

Lmfao!

Who's the small guy on your desk? I need a partner in the garaget too!

@rcguygarage

4 жыл бұрын

That's Vector amzn.to/2RUwZH6

What are those lil robots on the table called?😆

Is important give a name to this mascota of channel. I give this name: RCito

I wish everything was beadlock

@rcguygarage

4 жыл бұрын

Extra weight problems👍

@TrashCanNinja87

4 жыл бұрын

@@rcguygarage chicks love dad bods

@rcguygarage

4 жыл бұрын

Drunk again😝🤣😂 huh?

@TrashCanNinja87

4 жыл бұрын

@@rcguygarage hey hey hey

@TrashCanNinja87

4 жыл бұрын

@@rcguygarage i have enough rc to share my door is open

I wouldnt trust hairspray on my foams. I havnt heard of people having issues.

@rcguygarage

4 жыл бұрын

On the larger wheels with beadlocks I've heard of people having issues. It's just my 2 cents on the multiple uses products have than what they're intended for. Wouldn't need it for normal foams and wheels . . . BUT YOU ALREADY KNOW THIS Trash Panda😂😝😜🤣👍💯👊

step one make sure the wife isnt home so she doesnt see me putting rc stuff in the dryer/taking her hair spray

@rcguygarage

4 жыл бұрын

Nah I have to fix whatever I break anyways BUT she's the one that came over to me in a panic when she found the foam in the dryer!!!!😂😝😜🤣

Dryers and foam.....make me nervous....too much heat and they melt and probably give out toxic fumes. Even low heat I worry, I might choose air dry but it seems to work for you...I would just advise others to be careful....after all how many of us guys know how to work a dryer?.....sshhh dont let the ladies know if you do lol

@rcguygarage

3 жыл бұрын

Right but then that would mean to live we have to watch everything too closely. Socks, elastic waist band on underwear every plastic type utensil used to cook with heat. It's all just to much to worry about. That last part is funny though. We can rebuild an engine but not operate a dryer🤪🤣🤪🤣

Thumbs DOWN because that lil robot thing kept making noises and its actually annoying when you're trying to pay attentin to a video and learn something, good looking out on the mod, but why have the distraction there?

@rcguygarage

2 жыл бұрын

👍💯😘

These rims are horrible and snap so easy