2:42 My Honda manual for my CRX says an 8mm Pin Punch will work to remove the Bitch Pin.

@projectgoodspeed

4 ай бұрын

@jhmed9 Good Lookin’ Out!!👍

The second gear is the syncro, you need to rebuild it

It doesn't look like you tightened down the allen bolts broski.. That would explain why there is still so much play. You should check out the Detent Spring Kit from speedfactory and the Shifter Spring they make. Its a really nice upgrade for the D series transmissions. It makes the shifter feel solid af compared to stock

Ive bought same link kit hoping this would work, had to make all my own bushings and build both pivit joints at the trans end. Shifted hard from beginning but soon as winter hit it became harder and harder to get into 1st and 2nd. Keep in mind no gears grind just cant get them in. Im convinced creating your own setup using this adaptor is not ideal and like seen if this video alignment is off right away as the block connection isnt offset like the oem round knuckle. Dont waste your time and buya new OEM complete linkage or a used one that isn't whooped/loose.

Bro you’re supposed to tighten the allen bolts so it clamps down on the transmissions side of the shifter lol Also change the plastic ball bushing in the shifter with a new oem one

Looks like the 2 bushing they gave you goes on the other part of that knuckle.

@projectgoodspeed

Жыл бұрын

Daaaaamnn… i didnt even think of that!😅 The website didn’t mention it and I totally overlooked it but you might be right. I just dont know if the bigger bushing would clear the fitting… but it mighta been worth a shot.. oh well 😔👍

50-50 honda mtf and synchromesh for that 2nd gear grind.

@projectgoodspeed

Жыл бұрын

Yeahh im pretty sure the synchro needs to be replaced but they be TAXIN…😔

I have seen this kit before. Extremely nice piece. If you evert decide to install new syncros its super easy. Lots of very helpful videos on youtube. You do really solid work my guy👍Not to many know the actual namecof what they referctonas a bitch pin. Its acually a "roll pin" 😉

My “bitch pin” came out so easily with 6 moderate taps with hammer and pin punch.

I've been in your shoes, and kinda I'm still in it just got some bushing kit to improve this to butter

@projectgoodspeed

Жыл бұрын

Best of Luck!👍

It's the transmission .that's from 2 gear Is getting abused

Maybe it’s your transmission it’s self.

@projectgoodspeed

Жыл бұрын

It could be.. i wont know till i get it looked at thooo😅

I feel like 80$ is crazy, maybe that’s just me

@projectgoodspeed

11 ай бұрын

@oliveryimbo You aint Lyin!!!😅

Lol i barely touch 1st gear

bro what area in cali are you in, you ever go to car meets itd be cool

@projectgoodspeed

Жыл бұрын

@GreenKata Mostly Northern Cali… Yeahh but I dont really go to Car meets anymore…. Work😔

@GreenKata

Жыл бұрын

@@projectgoodspeed I know that feeling, work and trying to finish my car project makes car meets hard to do. Central Cali myself

@projectgoodspeed

Жыл бұрын

@GreenKata Yeahhh…it be like that sometimes 😅

@Alexmuchacho916

Жыл бұрын

​@@projectgoodspeedyou near sac? I feel like i've seen your car at a meet or two. Or maybe even driving around

@projectgoodspeed

Жыл бұрын

@Alex Mercado Nahh that wasnt me. I aint been to Sac in a minute.✌️