Thank you. My dad got me my g600 like 8 years ago and he just died about a month ago, I haven't been able to use the mouse because of the double click. But it's working brilliantly now. Thank you. Thank you. Rip dad.

@in_vas_por8810

Жыл бұрын

RIP pops. g600 is the best mouse ever made.❤

Thank you so much for this video. I thought my G600 is dead because right click worked 1 out 4 clicks. I was able to fully fix it using your guide!

Thank you very much! My g600 last for 5 years, it has been doing the double click issue for 6m - 1y, now it's fresh new... I've just swapped the left switch with the third right switch (no use at all).

@Xanubizz

3 жыл бұрын

best comment ever

@nclt1978

3 жыл бұрын

Now that's resourceful. Using shift button despite the double click will still be good I think :D

@Xanubizz

3 жыл бұрын

i tried this aswell today, but the button broke during the solder job :(

Thanks for the tutorial, my beloved G600 is back to normal. I have this mouse for over 10 years now and did not want to throw it away. The "new" version of it does not have the same feeling as the old one, so thanks to this tutorial its back to normal operation.

just repaired my 7 year old G600, no replacement parts used, just bending the copper til it seated properly. thank you for the tutorial

Best tutorial on KZread I found (after seeing three others). Thanks for the guidance.

Thanks for the tutorial! I love the G600 because it's the only mouse that has a separate third mouse button for the ring finger. That way you can have middle click there. It really makes a huge difference using middle click just for browsing and stuff for me. But I gone through a few because of double click issue, gonna start resoldering new switches now. Thanks again!

@dejayrezme8617

3 жыл бұрын

@@TheCassla Well the good news is the G600 seems to be going up in value haha. I'm looking into building something like this now: www.reddit.com/r/ErgoMechKeyboards/comments/gqmyy2/track_beast_build_log_a_trackball_dactylmanuform/ Using the trackball on a keyboard you basically have 15 mouse buttons :)

Thank you for such a clear and tutorial. My G600 is now fully functional once again! This is a huge life-saver given that this mouse is now discounted and I haven't found anything that can replace it. But now mine lives on!

Good video ! Thanks to you, my left button is still alive now! I was having a random problem with unintentional double left clicking. Personally, I tested 2 tips that work for me: 1) if you press a little hard on the 2 sliding pads with your fingers, you should feel the 4 holes of the 4 crusiform screws. with the back of the mouse facing you, the top leftmost hole is a fake hole...the real hole is 4mm to its right. Look the guy on the vidéo to help you. 2) I used a 4mm metal drill bit which is perfect for drilling (by hand) the correct clearance for the screws. then I chamfered at 8mm (by hand) to deburr because the glide of my mouse was less good because of the plastic residue. perhaps deburring with a cutter would have been just as effective. I haven't tested. 3) I didn't buy any other switches, I opened the G button switch that I don't use (under the ring finger) and I recovered the super fragile metal strip, to exchange it with the Left click button faulty. This is the most difficult, delicate part... you have to engage the part at the top and bottom of the metal stip then push vertically on the "spring" last. Not easy... I thought I wouldn't make it! you have to take your time and be meticulous! But now that my left click is working again, I'm happy to have tried the repair as described in this beautiful video! THANKS

@pjbergquist1939

7 ай бұрын

Exchanging the metal spring was certainly the most tedious part. I almost gave up. Such a good idea to just use the G button spring as a replacement. I bought the replacement ones on Amazon and they worked as well.

Hello, I had this double clicking problem happening erratically for years now, I supposed it was a hard ware problem but was afraid to go and poke around. After seeing your video, I decided to give it a try. I didn't have spare parts, but I figured doing some cleaning, and reshaping the spring a little wouldn't hurt, And it fixed the problem. I don't know how long it'll hold, but thank you for your precious advises .

Been using my G600 since december/2014 and just now, 2021, it started to do a double click on the left button. Thanks for the video. It was an expensive mouse for me and now i can fix it.

@Regan995

2 жыл бұрын

same boat but its the g18-g20 and the third mouse button having trouble my 4 most used

Thank you! I was able to fix my beloved white G600, I didn't really want to replace it!!

I have fixed this same problem with a drop or two of IPA (isopropyl alcohol) on the bad button while keeping it depressed to allow the IPA to get inside and clean the contacts by cycling the button. Works like a charm and does not pose the inevitable risk to other components when soldering.

great tutorial, really helped that you posted the part numbers both on the original switch and the replacement one for reference! finally gonna fix my old g600

I didn't know it was feasible to open up the actual clicker component to only replace potential problem parts. good info for the future

Thank you so much for the tutorial. One thing I would have liked you to go over in a bit more detail was the actual placement of the metal spring. I think I spent 2 hours trying to set mine correctly; I kept trying to put it in at a slightly wrong angle and as I'd try to lock it in it would go flying back out. I *think* the answer was to slide the back (the part with the metal "tab" that actually makes the contact that is read as the click) against the top contact first, basically as far back as it will go, then hold it in place, and kind of pull the other end (with the ring/hole) over its contact with tweezers, and if you're really perfect it will snap in. Definitely was a big frustration for me, and something I had a hard time seeing in the video itself. That said, I got it in the end, and you saved me at least $100 on a new mouse, at least for a while. :-)

@TheQuinch

4 күн бұрын

I've had the same problem, been wrangling with it for three hours before I gave up. I'll try your advice.

Thanks for all this information. I think to change LMB switch with pinki-button switch (3rd button - most right).

'a sword of exact zero' lmfao

Great, clear, concise tutorial! Thank you!

This is a great tutorial! this method actually works on most mice, just fixed my scimitar pro using an older mouse laying around.

i'm so glad you posted this! Restored and back to working order...it just needed a bit of cleaning :)

Thx for the tutorial. I fix my beloved G600 :)

Thanks!! just ordered the parts and will try this out myself, but will soldder them in.

Thank you for showing how to fix it. My G600 will have a second life now.

Man, thank you very much for the manual. I fixed the mouse. You are the top. Мужик, спасибо тебе большое за мануал. Починил мышку. Ты топ.

I ended up damaging the spring and tossing the mouse away, it just wouldn't click after putting it back.

@luzel3319

3 жыл бұрын

Same here, now i can't right click on 2 mouses. Sml gonna have to buy new switches and find someone who can replace this completly

Fixed my 5 year old G600, many thanks!

Might be worth adding the part reference to your description as well... I nearly missed that info and tried using the wrong keywords to locate them until I referenced back. Thanks for the video though, absolute $deity send. D2FC-F-7N

@danielsouza6691

4 жыл бұрын

Do you know if it's possible to throw in a 50m switch?

amazing! I guess there is no non-solder way to fix the other switches my scroll click (middle click) just died and looking to replace it, if it could be done this way it would be rad

Nice video. Another thing to note is if you do not have another switch handy is you can desolder the 3rd mouse button, especially if like me you never use it, and use that switch to replace the left mouse button switch. In my case it's basically a new switch. You obviously end up with the 3rd switch having the double click problem but if you don't use welp who cares!

@hobbes3380

4 жыл бұрын

Hah, treating the g-shift button as a spare switch. Clever!

@noobishnerd2535

4 жыл бұрын

this is what i did but not soldering i got the copper thing from the g switch and switched it to the left click this is useful thanks thanks

Thank you. Love and blessings.

I've replaced my switch and STILL get the double clicking issues, I've seen some saying that it might be a software problem as well

@philippdrescher6012

4 жыл бұрын

You can try to fix it with an Autohotkey skript to prevent fast doubleclicking. Try this script: ~LButton::return ; Set A_PriorHotkey. #If A_PriorHotkey != "" && A_TimeSincePriorHotkey LButton::return ; Block hotkey. You can still doubleclick with this, but you have to do it slower as it blocks the mouse button for 200ms. You`d have to install Autohotkey, insert the script in an editor and safe it with .ahk ending, then run it.

@philippdrescher6012

4 жыл бұрын

You can actually use 100 instead of 200, works for me atleast and it's easier and smoother to still double click. :)

@user-lf6en3fy4r

4 жыл бұрын

Fixed double click on my g600 by fliped pads pushing switch. At g600 it has some white teflon like pads/skates pushing switches. You could try flip it or change with other button pad.

@fabriziotobia9646

3 жыл бұрын

@@philippdrescher6012 I'll try this, thank you :-)

@JediRogue

3 жыл бұрын

@@philippdrescher6012 omg, thank you!

I have same problem in my G600. Thanks the video. How did you glue the pads after the maintenance? Did you use Japanese Glue?

@FamilyHomeTheater

5 жыл бұрын

I don't have the pads any more. I just use it without them. It doesn't bother me much since the surface I use it on is slick.

@emretaskran5483

5 жыл бұрын

@@FamilyHomeTheater Ooo thanks. I want to reuse them. Can I reusem them, is it possible?

@FamilyHomeTheater

5 жыл бұрын

@@emretaskran5483 You can try... but you can get these for $8: www.amazon.com/Mouse-Skatez-Feet-Logitech-replacement/dp/B015QRZSXK

@RossiaIsNoMore

4 жыл бұрын

I would recommend to buy universal mouse pads ans stick them on mouse in any place you want. But notice, some universal pads could be too thin, so you will have to stick them over "border" which surrounds default G600 pads (because they height could be lower then height of those "border"). I use mousepads which were in a box with mousepad, and sticked them over "border".

@RitzyBusiness

4 жыл бұрын

If you're using a hard surface i'd suggest these, www.amazon.com/Ceramic-mouse-pads-Lexip-PC-Mac/dp/B07MW5XJ8G/ref=sr_1_4?crid=2ZB5T2R7UO92S&dchild=1&keywords=lexip+ceramic+mouse+feet&qid=1598903821&s=electronics&sprefix=Lexip%2Celectronics%2C140&sr=1-4 They are ceramic dots that work really well on my g600.

I have problem with the side buttons. I think i fuc*ed up with the white paper who connect side button. 😢 Do you know how to fix it ?

the best solution!!!!!! thx a lot

can confirm: this works. was able to fix my G600 that I've had for 3+ years

yo dude thanks for this video what i did is i exchange the little copper thing from the ring finger button to the left click and it worked thank you so much i dont have to buy a new mouse

Any idea why buttons fail so much in Logitech devices? In my G600 the buttons around the scroll wheel stop working within months of use, and they are just push-buttons! Since I got this mouse I programmed the G12 button as left button so it didn't wear down. So far so good. In my marble mouse the left button is death, no matter how many times I replace it =(

@FamilyHomeTheater

Жыл бұрын

Only thing I can think of is lots of gaming clicks. Especially if you are jitter clicking or something like that. I need to replace mine again also.

@xavierr4508

Жыл бұрын

@@FamilyHomeTheater I use the mouse as a regular mouse. I bought this one for an EDA software called KiCAD, so that I didn't use the keyboard short-cuts, nothing neither fancy nor intensive, but the buttons around the scroll wheel are death.

Just used this method! It worked wonders! Thanks so much!

I have had 2 of these in the last 3 years and i cant win with the scroll wheel. First one broke out of no where maybe from rage and my second mouse came with the scroll wheel broken smh. Cant find a fix or a replacement wheel anywhere. Smh its sad because ill never use a different mouse

Nice to see how easy it is.

i got a question what if my mouse side button like gets mushed inside my mouse and the side button dosent work anymore and i have the button

Thank you for this video. Could you share the link in Amazon to this buttons.

I pulled this up since I didn't want to screw up those plastic tabs, put a dream cable in this pupper which makes this mouse feel even better (shoe lace cable vs stiff annoyance). That said for those watching make sure to clamp the mouse cable to the shell BEFORE dropping the board back in. I learned this the hard way and ended up with a stuck g-shift button, resulting in having to open it back up to do it the right way. Given the stiffness of the weave of the original cable might not be an issue doing it that way, but just something I thought to point out.

I got so pissed off I slammed it on my desk and it works again it’s a hit or miss low or high budget fix

Very nice video! Would be nice to link the products (e.g. the replacement mouse buttons) in the video description.

Do I have another diffierent revision or older model? There are no screws beneath the skates. The plastic is blank!

@Crypt1cmyst1c

4 жыл бұрын

the skates are held on with an adhesive pad that's the same color as the skate. you probably separated them. try digging under the edge a bit with an exacto knife or fine flathead and you should be able to pull it up.

So i got the double click problem. But i fixed it without opening the unit at all. I put my lips to the left click button (the one that was double and triple clicking) and blew in it, not exceedingly hard either. just sorta lightly to add Humidity from my breath into the unit. Where i live is pretty dry, and i read a guy used a humidifier to get his double clicking issue to go away. So i thought what the hay, ill give it a go. This isn't a nintendo cartridge but, if its humidity it wants.. and sure enough it worked! I've not had 1 single double click in 4 days since humid-blowing into it!? So, maybe try very softly blowing in first? -then- move on to disassembly.

Thanks so much! I was able to follow this guide!

Thank you very much. My mouse had that problem at the worst time, when I had a lot of work. In addition, purchases and shipments in my country are restricted due to covid. You're the best. A hug.

your are a hero

4:01 there is a reason for that camera edit. haha

@jaydoe6

3 жыл бұрын

Absolutely! Pretty much impossible to get that sucker back in.

Anyone know if the side buttons can be replaced?

@FamilyHomeTheater

14 күн бұрын

@@93LiZa93 I haven't tried it. I'm sure they can be replaced. But it is probably going to be a bit tougher to get to.

i solved the switch double click problem, but now the logitech gaming software doesn't recognise the mouse anymore... what gives? :/

how to replace the switches on the side buttons?

Thanks!

Hello there! What size of philips screwdriver is used to open the mouse? Thanks!

@FamilyHomeTheater

3 жыл бұрын

I'm not sure of the exact number. A small phillips should be fine.

@smiechu47

9 күн бұрын

torx 6

I opened mine up, and sprayed electronic contact cleaner on the mouse button, waited a few hours for it to dry, and now it works perfectly again. A nearly $100 mouse shouldn't be doing this.. I have $10 mice that have worked flawlessly for twice as long, in fact I had to use it until I fixed by G602. May still need to order new glider pads.

thank you, i fix my G600

why not changing the whole switch? its really hard to open it up and change the metal part in it....

@RitzyBusiness

4 жыл бұрын

Because removing the covering, even if a bit hard to get off, is within the skillset of everyone. Soldering on the other hand, while not difficult, requires a skill you need to practice and learn.

@zeffmetu

4 жыл бұрын

@@RitzyBusiness the problem is not removing the cover but to close it back. It requires crazy hand skills to place that metal part without damaging and its even harder to close the cover with that small whitey button on it. As long as you have the tools you can one shot soldering if not... good luck trying

It works. Thank you

Can you provide the mouse wheel part number please?

Fact: Old guys have skills.

wow, i have over 4 g600's to repair now.

@kenmasters2231

3 жыл бұрын

the metal strip part is impossible

Thanks!!!! Good works!!!

6:04 I need that ribbon cable, mine is ruined

Clicking like with my refurbished mouse. You can't buy a new one anymore but I really prefer this one over any other MMO mouse. Just tested it in Dota 2; all good so far.

@ExySmexy

3 жыл бұрын

theyre still selling new ones on amazon

Thanks for the tutorial! Had this issue for way too long now and decided to fix it. I still had 3 buttons left from when I replaced the one on my Logitech G5 (going on almost 15 years now). Back then I tried to do it without soldering first, but it was too finicky for me. So I just desoldered this one as well. Reused the pads also, didn't have an issue with it the first time. While I was in there I also removed the weights, I'll see how it goes. I liked the big weight at first, but now not so much anymore - maybe I'll add 1 back in if it is too light. :)

Goodjob! thanks!! ^^

Putting that spring back on is infuriating!!!

The fact my G Pro Wireless is failing after less than a year and my G502 is running strong after 5-6 years is alarming.

даббл клик ппц у них после 3-5 лет ... а так замечательная мышка самая лучшая