loading and spreading manure

Автокөліктер мен көлік құралдары

This video is one of many I have filmed showing life on our small family run dairy farm in Gloucestershire, England.
Visit my KZread channel to see further videos of life on the farm through the year
/ thefunkyfarmer

Пікірлер: 77

  • @sheldon6993
    @sheldon69939 жыл бұрын

    That shuttle would drive me nuts!!

  • @thefunkyfarmer
    @thefunkyfarmer9 жыл бұрын

    About 10 years old Thomas, hope to retire it this year

  • @callumcurrie1651

    @callumcurrie1651

    6 жыл бұрын

    Funky farmer how many tractors do you have

  • @thefunkyfarmer
    @thefunkyfarmer11 жыл бұрын

    tractors fitted with a hydro clutch so not the same issues as a conventional one. some valid points made though

  • @alistairtipping9343
    @alistairtipping93438 жыл бұрын

    do you still have two muck spreaders now?

  • @ollyg2k11
    @ollyg2k119 жыл бұрын

    Your a bit ruff on machinery

  • @hamishcarr9400

    @hamishcarr9400

    7 жыл бұрын

    Oliver Gough it's just cos mckormic have a bad clutch on them

  • @cowsrcool1103

    @cowsrcool1103

    4 жыл бұрын

    @@hamishcarr9400 o they dont he is a shit driver

  • @michaelrafferty373
    @michaelrafferty3735 жыл бұрын

    Hard on machinery

  • @scottscottirwin1535
    @scottscottirwin15357 жыл бұрын

    I was driving a tm yesterday and it seems to be a problem with the clutch

  • @arthurbutt4603
    @arthurbutt46039 жыл бұрын

    Going a bit fast on that first load going over that trac there was a bit of a hole muck spreader nearly tipes over great vid

  • @OkOk-mw4hc

    @OkOk-mw4hc

    8 жыл бұрын

    Arthur butt how's it going

  • @bradleykirk3206

    @bradleykirk3206

    5 жыл бұрын

    No we're near tipping over

  • @Northern_Farmer
    @Northern_Farmer10 жыл бұрын

    wow thats a jerky clutch on that tractor... reminds me of my old case with a bad clutch spring

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    yes its very sharp.i guess thats because its a hydro clutch, takes a bit of getting used to

  • @willfletcher6418
    @willfletcher64189 жыл бұрын

    The clutch looks a bit rough on that McCormick!

  • @martinschenstrom2472

    @martinschenstrom2472

    9 жыл бұрын

    ye he are very fast w the clutch!!!:)

  • @Jim-McKechnie

    @Jim-McKechnie

    9 жыл бұрын

    I put a video on my channel with a CX105 clutches are all very jerky on them - very hard to find the biting point of the clutch on them - its either all or nothing, seems to be a bit of a design flaw

  • @thefunkyfarmer

    @thefunkyfarmer

    9 жыл бұрын

    Jim McKechnie I think your right jim. The cx95 we have is the same, maybe its something to do with it being a hydro clutch rather than a conventional sort.

  • @jamiemonaghan8263

    @jamiemonaghan8263

    7 жыл бұрын

    thefunkyfarmer I am likely that you have to go on to a few minutes ago x👃😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😨😱😱😱😱😲😲😲😲😲😲😲😲😲😲😲😲😲😲

  • @Masseyman-nv2kl

    @Masseyman-nv2kl

    6 жыл бұрын

    thefunkyfarmer I know what u mean. I had to drive a case 895xl and you could never find the biting point. It was your waiting for it or breaking the seat setting off. But great vids

  • @Faly657
    @Faly6576 жыл бұрын

    happy new year

  • @jamesgreen7831
    @jamesgreen783111 жыл бұрын

    luckily its only a mcormic but your right thats why you never buy a second hand loader tractor expecting the clutch to be good or the front axle and steering to be good because they just dont last when treated like this

  • @PAYNEKILLER..
    @PAYNEKILLER..2 жыл бұрын

    This guy has to be one of the first KZread farmers.

  • @thefunkyfarmer

    @thefunkyfarmer

    2 жыл бұрын

    you're right. I've been doing it for ten years

  • @PAYNEKILLER..

    @PAYNEKILLER..

    2 жыл бұрын

    @@thefunkyfarmer Bet there aren't many farmers that have been on KZread that long. None I've seen anyway.

  • @Thomas_-qj2kf
    @Thomas_-qj2kf9 жыл бұрын

    How old is the spreader

  • @tobimobiv1
    @tobimobiv15 жыл бұрын

    I realise this is an old video. But I love it anyway.

  • @thefunkyfarmer

    @thefunkyfarmer

    5 жыл бұрын

    It's not old I filmed it this week

  • @thefunkyfarmer

    @thefunkyfarmer

    5 жыл бұрын

    Sorry I was confused. This is an old video. Take a look at the video I uploaded today to see the latest video

  • @kawasaki6107
    @kawasaki61077 жыл бұрын

    Do you have 2 muck spreaders or did you just change tractor

  • @thefunkyfarmer

    @thefunkyfarmer

    7 жыл бұрын

    2 spreaders

  • @darrenduffy9542
    @darrenduffy95428 жыл бұрын

    Why don't you open the lid on the spreader? makes loading so much easier and that what it's designed to do

  • @thefunkyfarmer

    @thefunkyfarmer

    8 жыл бұрын

    +Darren Duffy yeh i know but the rams broke so it won't stay open

  • @darrenduffy9542

    @darrenduffy9542

    8 жыл бұрын

    Haha! we use to use a piece of wood. Good videos

  • @lsshetland722
    @lsshetland7227 жыл бұрын

    Your running her to rough on the clutch!!

  • @kroneking127
    @kroneking12711 жыл бұрын

    All tractor's are different really it all depends what it's doing, as you can see the ground around the muck is very uneven so u have to give it welly to get anywhere as such and no one knows his tractor better then him

  • @michaelryan9882
    @michaelryan98829 жыл бұрын

    Your breaking my heart

  • @ceiranworthington558
    @ceiranworthington5588 жыл бұрын

    my uncle has a spreader like you but we dont use a tractor we fork it in takes us about an hour

  • @thefunkyfarmer

    @thefunkyfarmer

    8 жыл бұрын

    +Ceiran Worthngton done that myself many times

  • @garymellett123
    @garymellett12310 жыл бұрын

    id say your clutch needs to be calibrated dealer would do that for you

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    i think your right Gary

  • @garymellett123

    @garymellett123

    10 жыл бұрын

    Ya ive seen the same thing on a claas arion no smooth take off in it whatsoever clutch wasnt calibrated

  • @lesleyhenderson181
    @lesleyhenderson1812 жыл бұрын

    Probably need to recalibrate the clutch just on the loader tractor

  • @epj900
    @epj90010 жыл бұрын

    Not to labour the point, but I'm sure that clutch shouldn't be so harsh,it must be sending massive shock loads through the gearbox.I think it needs a dose of looking at!

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    its been like that since we bought the tractor new so i always assumed that is how they are on the McCormick however after putting some vids on here and getting some comments i'm not so convinced. I think i might get someone to take a look at it

  • @jacktomlinson4167

    @jacktomlinson4167

    10 жыл бұрын

    thefunkyfarmer if its an extra shift box the clutches on them are known to be shite!

  • @michaelryan9882

    @michaelryan9882

    9 жыл бұрын

    Jack Tomlinson I couldn't agree with that now

  • @Masseyman-nv2kl

    @Masseyman-nv2kl

    6 жыл бұрын

    thefunkyfarmer with some masses especially the ones with dyna 6 in the early 2000's the clutches on them are that bad they just throw you about in the seat and nearly break you back! Cause we have a 6465 dyna 6 and I like it in the way it's a smooth tractor on the road but close quarters I would rather get another tractor!

  • @adrianmorris4560
    @adrianmorris45605 жыл бұрын

    The clutch just needs to be calibrated, 10 min job

  • @martinschenstrom2472
    @martinschenstrom24728 жыл бұрын

    how many mccormick du you have on the farm?:)

  • @thefunkyfarmer

    @thefunkyfarmer

    8 жыл бұрын

    +Martin Schenström 2

  • @martinschenstrom2472

    @martinschenstrom2472

    8 жыл бұрын

    Ok

  • @g.j.hphotography7170
    @g.j.hphotography71706 жыл бұрын

    You need to let clutch of a bit slower 🚜

  • @SuperDiscovery95
    @SuperDiscovery9510 жыл бұрын

    make life easier for loading by opening the door of the dung spreader.

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    I would James but the hinges are knackered

  • @niallferry1672
    @niallferry167210 жыл бұрын

    is the massey at the end yours

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    yes it is

  • @niallferry1672

    @niallferry1672

    10 жыл бұрын

    you never use it

  • @thefunkyfarmer

    @thefunkyfarmer

    10 жыл бұрын

    Niall Ferry

  • @riordan7740
    @riordan77407 жыл бұрын

    your a rough opperator

  • @MrFarmingmad
    @MrFarmingmad11 жыл бұрын

    poor clutch

  • @thevloger8580
    @thevloger85807 жыл бұрын

    nice I want to be a farmer

  • @Aziz-cc7us

    @Aziz-cc7us

    5 жыл бұрын

    TheVloger it’s hard work

  • @alxanderrodriguez460
    @alxanderrodriguez4606 жыл бұрын

    You dropped some..

  • @davidbrown7066
    @davidbrown70666 жыл бұрын

    could you not put some morn spreading videos on please

  • @thefunkyfarmer

    @thefunkyfarmer

    6 жыл бұрын

    In a few weeks

  • @iestynevans9275
    @iestynevans92756 жыл бұрын

    Why would u not have 4wd spreading its so dangarours

  • @thefunkyfarmer

    @thefunkyfarmer

    6 жыл бұрын

    why is it dangerous

  • @richardtalbot4035

    @richardtalbot4035

    6 жыл бұрын

    Nothing dangerous with using 2wd while spreading at all Ok if you was on slopes then yeah 4wd would be a better option but on flat 2wd is fine

  • @iestynevans9275

    @iestynevans9275

    6 жыл бұрын

    1, you only have rear brakes2, if you drive on the muck your gone, 3, of you start sliding your in trouble

  • @thefunkyfarmer

    @thefunkyfarmer

    6 жыл бұрын

    4. I've never had any problems. 5. I grew up in an era before 4wd tractors were available and managed ok then

  • @iestynevans9275

    @iestynevans9275

    6 жыл бұрын

    thefunkyfarmer but you would agree thats its much safer? Thanks for replying love the videos keep up the good work

  • @supersiem1431
    @supersiem14316 жыл бұрын

    Man you get so much hate😒

  • @conorwalsh7413
    @conorwalsh74136 жыл бұрын

    why do you drive sooooooooooooooooooooooo slow and post new vidos

Келесі