This is my favorite video in the JL help section. Helped a lot with my own setups.

@JLAudioInc

3 жыл бұрын

Glad to hear. Thanks for watching, Connor!

Favorite Help Center Video! Yes I watched every bit. Very informative and helpful. I like to know my equipment in depth

@JLAudioInc

3 жыл бұрын

Glad it was helpful!

Best and most helpful video for me personally. JL Audio y’all ROCK! Merry Christmas from Western KY!

@JLAudioInc

3 жыл бұрын

Same to you, Brad - thank you!

Proper amp setup is totally important!! Love teaching customers about this!

@JLAudioInc

3 жыл бұрын

Totally agree!

Love this video. It speaks to not only JL products. All of our customers can benefit from watching this. Great info broken down and very helpful.

@JLAudioInc

3 жыл бұрын

Thanks for watching!

Really enjoy watching these educational videos! Thanks

@JLAudioInc

3 жыл бұрын

Glad you like them! Stay tüned for more!

It is so easy to set these new amps up! I love it

@JLAudioInc

3 жыл бұрын

Glad you like it!

I definitely learnt a lot from this! I currently have JL audio speakers on my doors and trunk. I am building a full JL audio system. Always loved JL audio since I was a kid growing up! Thanks for sharing!

@JLAudioInc

3 жыл бұрын

Great to hear! Let us know if you have any further questions!

@jonathankhan5532

3 жыл бұрын

@@JLAudioInc Awesome! Thanks guys! JL audio always

This is my favorite help video and they are all very helpful! I can’t wait to own a VXi Amplifier and upgrade from my Slash. Happy New Years!

@JLAudioInc

3 жыл бұрын

Glad to hear it! Happy New Years to you as well. Good luck!

@TheNointimidations

3 жыл бұрын

@@JLAudioInc Thank you!

My favorite video. Great topic and excellent amplifiers.

@JLAudioInc

3 жыл бұрын

Glad you enjoyed it!

Thank you for always providing great information. 👍🏾

@JLAudioInc

3 жыл бұрын

Any time! Thanks for watching!

With such good info this is my favorite. Great job!

@JLAudioInc

3 жыл бұрын

Awesome! Thank you!

Favorite informational video so far . Haven’t had the pleasure of owning a VXI amp yet .

@JLAudioInc

3 жыл бұрын

Glad it was helpful!

Great resource! Thank you for the time and info.

@JLAudioInc

3 жыл бұрын

Our pleasure - glad you enjoyed it!

This is my favorite video here. A lot of great info!

@JLAudioInc

3 жыл бұрын

Glad you enjoyed it!

This my favorite video on all of KZread!

@JLAudioInc

3 жыл бұрын

Greatly appreciate the love, Truong!

I'm glad I found this video. Just in time for my install of two 12w7's and two HD750/1's to push them!

@JLAudioInc

3 жыл бұрын

Nice!

Great info... look forward to checking out other videos in the series!

@JLAudioInc

3 жыл бұрын

Awesome, thank you! There will be even more to come - stay tüned

This is my favorite help center video very descriptive and helpful

@JLAudioInc

3 жыл бұрын

Awesome, thank you!

love these videos! please keep doing them.

@JLAudioInc

3 жыл бұрын

We certainly will. Please keep an eye out on our social channels for more live sessions!

Favorite video of 2020. JL audio is the best.

@JLAudioInc

3 жыл бұрын

Appreciate the love and support, Matthew!

So far this is my favorite video here. I'm sure I'll find more.

@JLAudioInc

3 жыл бұрын

Happy to hear it. There are plenty more to come!

Great video to help with new build first build in over 15 years

@JLAudioInc

3 жыл бұрын

Glad to hear it!

This is my top favorite video .. super useful information ..thank you

@JLAudioInc

3 жыл бұрын

Glad you liked it!

This is my favorite video JL Audio for life

@JLAudioInc

3 жыл бұрын

Awesome. Good luck, Eduardo!

Love these videos, so informative!

@JLAudioInc

3 жыл бұрын

So glad! Thanks for watching, Will!

Thanks for the great info definitely will help on future projects !!!

@JLAudioInc

3 жыл бұрын

Glad it was helpful!

Awesome tutorial, JL for the win!

@JLAudioInc

3 жыл бұрын

Glad you liked it! Thanks for watching!

this is my favorite video by far!!

@JLAudioInc

3 жыл бұрын

Happy to hear it, Ricardo. Thanks for watching!

Great video! Keep up the amazing work.

@JLAudioInc

3 жыл бұрын

Thanks for watching - will do!

JL Audio is and always will be the king of audio. Audiophile’s rejoice!

@JLAudioInc

3 жыл бұрын

Thanks for the support, Lucas!

Great video found it very helpful thank you ... love JL AUDIO especially my w7

@JLAudioInc

3 жыл бұрын

Glad it helped!

I shore wish I had watched this before setting up my RD900/5 amplifier. Only running the sub channel at the moment which is why I was scratching my head why I had to run a remote turn on wire when I wanted to use DC Offset but was unable to, now it makes sense, only works on channel 1 which I’m not currently using. Lots of good information!

@JLAudioInc

Жыл бұрын

If you have any additional questions, we're here to help! Please don't hesitate to reach out.

Great info! Thank you!

@JLAudioInc

Жыл бұрын

Glad you enjoyed it!

this is what i have been looking for!

@JLAudioInc

3 жыл бұрын

Perfect - Glad we could help! Please let us know if you have any questions.

Super helpful video!

@JLAudioInc

3 жыл бұрын

Glad it was helpful!

This was my favorite helped me program my amp. 2020 giveaway and easy for many more. Jp quiso by far my favorite amps to get.

@JLAudioInc

3 жыл бұрын

Happy to hear it. Good luck with the giveaway!

Rob was an angel of patience... Good job buddy.

@JLAudioInc

2 жыл бұрын

Appreciate the feedback, Lewis. Glad you enjoyed.

Such an important factor to know especially when building and adding more power and sound.

@JLAudioInc

3 жыл бұрын

Glad you were able to get something out of the videos! Thanks for watching!

JL OVER EVERYTHING !!! STEVVVVVVVVEEEEEEE THE GOAT !!!! ONE OF YOUR BIGGEST FAN OF JL AUDIO since 06 WITH THE HELP OF MATT M. !!

@JLAudioInc

3 жыл бұрын

Thanks for the long-time support!

this was very helpful

@JLAudioInc

3 жыл бұрын

Happy to hear, Ed. Thanks for watching!

Great vid this is my favorite video

@JLAudioInc

3 жыл бұрын

Glad you enjoyed!

Great products!!!

@JLAudioInc

3 жыл бұрын

Thanks, Shannon!

This is my favorite, since I'm working on my system

@JLAudioInc

3 жыл бұрын

Awesome, Joel. Please let us know if you have any questions!

@joelmercado9710

3 жыл бұрын

@@JLAudioInc I sure will thanks

Thanks you JL for these awesome videos. I just had a new VXi700/5 installed as well as high end speakers and a JL Subwoofer (Professionally installed by retailer), and watching these videos gives me an appreciation of car audio system setup, as well as becoming more familiar with my system.

@JLAudioInc

3 жыл бұрын

Rock on! You're very welcome. Thanks for the great feedback!

@bodenedward403

2 жыл бұрын

Sorry to be so offtopic but does someone know of a way to get back into an instagram account..? I was stupid forgot my password. I would appreciate any assistance you can give me

@ernestkamdyn6028

2 жыл бұрын

@Boden Edward Instablaster =)

@bodenedward403

2 жыл бұрын

@Ernest Kamdyn I really appreciate your reply. I got to the site thru google and im trying it out atm. Looks like it's gonna take a while so I will reply here later with my results.

@bodenedward403

2 жыл бұрын

@Ernest Kamdyn it did the trick and I finally got access to my account again. I am so happy:D Thanks so much, you saved my ass !

This helped a lot with my 25 year old band pass box from JL

@JLAudioInc

3 жыл бұрын

Glad we could help!

This was helpful

@JLAudioInc

3 жыл бұрын

Happy to hear you enjoyed it, David!

Really good info

@JLAudioInc

3 жыл бұрын

Glad it was helpful!

Awesome training videos. I didn’t know you guys had these videos until I read about it on the “Prize Giveaway” post on IG . Keep up the good work

@JLAudioInc

3 жыл бұрын

Awesome! Thank you - and best of luck in the contest.

ive played with stereo stuff for years , and its nice to learn something new

@JLAudioInc

2 жыл бұрын

Glad to hear you learned something! If you ever have any questions, don't hesitate to reach out!

This is my Favorite. 2020 Giveaway. JL Audio For Life!

@JLAudioInc

3 жыл бұрын

Good luck, Josh!

Hi, you mentioned something about the TwK88 and input sensitivity. My source unit has a 5v pre-out and distorts at volume 48/50. Am I right in saying that the lower the voltage number on the input side, the less gain I will need to use at the amplifier? I ask because right now, with the volume at where it is, the input is set at 7.1, which yields in me having to turn the gain up high, I normally run direct from source to amp and I don't have to crank up the gain so much, it normally clips at just under 1/4 of a turn.

Perfect timing to tune my slash 1000/1!

@JLAudioInc

3 жыл бұрын

Awesome!

Good stuff, thanks!

@JLAudioInc

3 жыл бұрын

Glad you liked it!

@JLAudioInc

3 жыл бұрын

Congratulations, Stephen! You won our third place prize of the holiday giveaway. Direct message us on Instagram or Facebook to collect your Ogio backpack filled with JL Audio swag!

@theangryhog

3 жыл бұрын

@@JLAudioInc Thanks!!

The clipping light such a great idea

@JLAudioInc

3 жыл бұрын

Glad you enjoy it!

Merry xmas!!

@JLAudioInc

3 жыл бұрын

Merry Xmas, Johannes!

Could ya explain to me why the 13.5W7 surround mold and crack off? And is there a recall for this subwoofer?

What an awesome video! I read manuals and tuned my amp for my XD300/12TS3 power wedge to 24.5v as the manual said at 3/4 of the volume . (Thanks for the sound file from your website) It didn’t quite sound/feel loud enough for my normal listening level. I did this before watching this video. Half volume is very loud on the stock Bose system in my truck, so I think I will tune it the same way but at half volume. If I decide to go louder than half, can I just use the remote to lower the sub volume in that scenario even though it would probably be very temporary? This video just made everything so much easier to understand when installing a new sub!

@JLAudioInc

3 жыл бұрын

Yes, as long as you're aware of the change and why you are doing it, there is nothing wrong with setting your sensitivity this way.

I have to vouch to the quality of JLAudio, I purchased a HD 900/5 amp and 10w6 sub back in 2007-8, they have seen three car installs along the way, the amp is still running strong and being used in my current system, the sub has finally gave out last month, the cone separated from the foam baffle on the outside, I know I could probably send it back and get it fixed (16+ years of jamming, cant complain!), but I decided to get a new one in your pre-made ported box, may still send back to see if the old one can be fixed. So I have a question about setting gains, I'm currently running Focal elite 165k2 two ways, the crossovers have sperate outputs for both the tweeter and mids, so, I have the tweeters running off the front channel and the mids running off the rear channels, should I use different test tones for each channel now that the mid and tweeter are running off separate channels? and if so, what test tones should I use for them? Also does this make any sense running them like this, is there any sound quality gain having the mid and tweeters getting more "power" or should I just run them off the front channel? thanks

My favorite

@JLAudioInc

3 жыл бұрын

Awesome!

I love how the premium line amps have a clipping light for easy setting

@JLAudioInc

3 жыл бұрын

Thanks for watching, Juan!

I am truly educated here by JLAudio and glad to learn that people behind the products are really smart and informative. I have a question. For analog frequency filters, if I want my midrange to work fully at 300Hz, I have to set filter to high-pass mode and the potentiometer to 300/1.4 Hz or 214 Hz (at -6 dB) and then the power will drop 12 dB from 300 to 150 Hz. I already check out the manual and there is no information about at what frequency the filter starts to cut off for a given potentiometer value?

@JLAudioInc

3 жыл бұрын

Geat to hear! To answer your question, the filters in most of our amplifiers have a 12dB slope.

What is “desirable” level of clipping for a sub in terms of a percentage of voltage above spec on a DMM? Sub is JL M7 12” Also, my Fusion RA770 doesn’t clip at full volume on my SMD-1 so I set the gains at full volume

Great Info! Can I use also the DMM method on a JD400/4 as well as the clipping LED?

@JLAudioInc

2 жыл бұрын

Yes! You could use the DMM method, although typically the clip light allows you to gain a bit of extra output versus the set target voltage suggested for 75 watts.

@andrewnaidl8606

2 жыл бұрын

@@JLAudioInc Thanks!

Do all jd amps have clip indicator, what would be the reason mine isn't turning on?

@JLAudioInc

3 жыл бұрын

Richard, thank you so much for reaching out. Please contact our tech team directly and they will be able to assist you with this further. jlaudio.zendesk.com/hc/en-us/requests/new?ticket_form_id=360000078093

Hi @JLaudio Just getting back into putting bass in my car after around 15 years gap so slightly rusty. I haven’t really used JL Audio in the past but after research I am sold. So I’d like around 500rms and am very interested in a single 10w3v-2, space is an issue so will be getting a custom sealed enclosure made specifically for it with all recommendations set by JL. My question is would the JD500/1 amp be a good partner for the sub? Many thanks

@silentsweep2

3 жыл бұрын

@JLaudio I will appreciate if I can get a reply on this

@JLAudioInc

3 жыл бұрын

Riz, our apologies for the delayed response - our tech team will certainly be able to assist you with this further - you can reach out to them directly here: jlaudio.zendesk.com/hc/en-us/requests/new?ticket_form_id=360000078093

Very helpful video, JL Audio or nothing!

@JLAudioInc

3 жыл бұрын

Glad you enjoyed it! Thanks, Abel!

Does anyone know the process to set up the amplifier gains going from Head Unit, to Twk, to non JL Audio Amplifier?

@JLAudioInc

Жыл бұрын

Thanks for the inquiry! Our tech team can definitely help with this!

Should this process be done with the engine running or engine off? Thank you.

@JLAudioInc

2 жыл бұрын

Hey there, Dante! Thanks for reaching out. Since no load is attached and the amplifier is not doing much work, it shouldn't matter if vehicle is on or off.

...setting the output of the twk 88 would be awesome.

@JLAudioInc

3 жыл бұрын

Thanks for watching, Jared. Please let us know if you have any questions!

The dealers needs to get trained right because most don't know jack. They just want to sell specially around Los Angeles area. Any recommendations?

@JLAudioInc

Жыл бұрын

We can't recommend one dealer in particular over another, however for a full list of local authorized JL Audio dealers please visit our online dealer locator here: www.jlaudio.com/dealers

someone tried to take my amp out of my trunk and now it wont work and they told me it was the RCA jack. I can not afford to pay 125 dollars to have them fix how can i fix myself

Is there an email I can send my plans to to have JL verify my thought process in building my system?

@JLAudioInc

2 жыл бұрын

Thanks for reaching out. Absolutely! You can reach out to our technical team here: jlaudio.zendesk.com/hc/en-us/requests/new

I wish every manufacturer had videos like JL! Someday I will be able to afford a full JL setup. Their subs and Amps combined give you a setup that will literally blow off your socks!

@JLAudioInc

3 жыл бұрын

We can't thank you enough for the kind words, Darin! Stay tüned - more videos to come!

West palm tapping In

Hey saludos espero que esten bien, nos hemos visto antes, en los show del mea soy de Buff,NY Trabajo para Lou Latif, de AudioOne. Gracias por su valioso tiempo. Aunque a veces sepamos esto muchas veces las pasamos por alto por que nos olvidamos de algunos detalles. Detalles muy importantes que terminan en dolores de cabeza. siempre estoy pendiente de sus videos….es como el sistema de mantenimiento que le doy al conocimiento. Gracias espero que esten bien.

ME GUSTARIA QUE EN UN FUTURO TAMVIEN EXPLICARAN TODO EN ESPANOL PORQUE MUCHAS PERSONAS COMO YO NO ENTENDEMOS MUCHAS COSAS PORQUE NO ENTENDEMOS MUCHO EL INGLES GRACIAS

I’ve always been happy with JL products, I’ve been using them since 2000. Never a problem but I wouldn’t want to be a manufacturer. I’ve seen teenage idiots ( is there any other kind?) do everything wrong. 10 gauge wire from battery post to frame. Using amp gain AND Bass boost as volume control, 2 4 ohm subs wired series and claiming subs are junk with no output. You name it I’ve seen it.

@JLAudioInc

3 жыл бұрын

There have certainly be some interesting "strategies" throughout the years that proved to be far from efficient. Thanks for sharing, Jeffrey!

Done this hundreds of times setting levels at 3/4. When you set the bass knob all the way up and adjust at 3/4. Everything below that and below half has 0 bass to the sub. Not sure that’s the best setting.

Boom on

@JLAudioInc

3 жыл бұрын

Thanks for watching, Kyle!

My amp is the Rd 1500

@JLAudioInc

3 жыл бұрын

Beautiful!

I have a lot to learn still.....

@JLAudioInc

3 жыл бұрын

Thanks for watching - stay tüned for more sessions!

who ever said your product doesnt last is foolish. have the 13w7 built in 2005 and still works. also slash

@JLAudioInc

2 жыл бұрын

Appreciate the kinds words and feedback!

Steve Turrisi has a slight Christopher Walken accent going on “you’re…setting your…gains all wrong, if you…set it…too high, I’m gonna have to…clip YOU”

@JLAudioInc

2 жыл бұрын

Too funny!

𝕲𝖗𝖊𝖆𝖙 𝖛𝖎𝖉𝖊𝖔 . 𝕮𝖆𝖗 𝖆𝖚𝖉𝖎𝖔 𝖘𝖔𝖚𝖓𝖉 𝖇𝖗𝖔𝖐𝖊𝖓 𝖉𝖔𝖜𝖓𝖙𝖔𝖆 𝖘𝖈𝖎𝖊𝖓𝖈𝖊. 👍🏽

Hello how are you? Lets grow togther.. thank you see u aroud too.

@JLAudioInc

3 жыл бұрын

Thanks for visiting!

Big fail on these amps. No hi level inputs?

@speakerboxexpert

3 жыл бұрын

i get you can plug high level into the rca's but damn, you make a nice clean sleek compact amplifier but then put the biggest ugliest bulkiest (probably not a word) connectors on it.

That's some serious abuse to tear/rip the spider or surround!

People always cheap out on amplifiers. A great amp is as important as the speakers!

@JLAudioInc

3 жыл бұрын

Can't cut corners! Thanks for the feedback!

Great video, keep up the great work!

@JLAudioInc

3 жыл бұрын

Thanks, will do! Thanks for watching!