roses are red, violets are blue, I'm on an ATF watchlist, and now so are you

@1991USsoldier

4 жыл бұрын

Which is dumb. Just because I like seeing people with the proper licensing doing things like this, that doesn't mean I am going to do it myself. Especially not without proper licenses..

@tinsoffish1810

4 жыл бұрын

So ....

@ElessarEstel

4 жыл бұрын

If you aren't on at least one watchlist, you aren't a true patriot

@1991USsoldier

4 жыл бұрын

@@ElessarEstel *Dies laughing* Yeah I mean, some of the reasons to end up on a watch list are so easy to do by accident that I would wager almost EVERYONE that isn't completely boring is on at least two. I'm fairly certain that just BEING a patriot IS a watch list. XD

@1991USsoldier

4 жыл бұрын

@James Harding Right on, brother. It isn't a left vs right thing as much as it is a Elitist vs We the People thing. Why? Because neither side can say they aren't guilty of having tyrants in their ranks. A nation divided against itself cannot stand, and it will require us to work together to survive. You're spot on, sir. Also, happy belated independence day!

I have a rescue randy and we used it for target practice before, but none of the bullet holes showed up! Im not a bad shot I swear! The rubber is just really good at hiding bullet holes. The only impacts we could see were from .22s because the lead rubbed off on the surface.

@colt45_r54

4 жыл бұрын

Ayyyyyeeee it's the backyard scientist

@alexeipistoun9783

4 жыл бұрын

Didn’t think I would see you here

@jlambuth

4 жыл бұрын

You aren't kidding. Rescue Randy has endured a lot of explosions so far and we are amazing how well the plastic is holding up.

@ston3dr3dneck18

4 жыл бұрын

Good seeing you here

@devil3r813

4 жыл бұрын

@bullsballs yep,,,And thank god they do.

I am not a veteran, but I am of the Vietnam war generation, and I had a number of friends who did serve and see combat over in the RVN. One of my friends who had been there had taken some claymore BBs in his back during a firefight. I’m not sure how he had ended up *in front* of a claymore when it went off, but he did. As was often the case with small projectiles, Army doctors treated the major injuries, administered antibiotics, and simply left the BBs in pace-as cutting down to them to remove them would have been more injurious than just leaving them there. (My dad's body was still yielding up small pieces of shrapnel from time to time from a chest wound suffered on Iwo Jima, right up until shortly before his death in 1990. The small bits of copper bullet jacket or pieces of the brass button on his jacket would migrate out of his chest, form a small pimple on his skin, and pop out through the skin. They were usually pretty tiny....just little copper or brass colored metallic flecks.) In any case, I was at a party in the early 1970s, and my friend Mike started gumming something around in his mouth, like he’d lost a filling or something. He spit it out, and it was a claymore BB that had traveled through his body from somewhere in his back, and popped out inside his mouth. I’ll never forget that.

@braddonovan1786

4 жыл бұрын

Your friend might have had an NVA soldier turn his claymore around.

@ChristopherSmithWHAM

4 жыл бұрын

Brad Donovan ¯\_(ツ)_/¯ maybe, who knows?

@rzr2ffe325

4 жыл бұрын

I had a Vietnam vet tell me the VC/NVA would quietly crawl up to their positions at night. Pull them out of the ground, turn them back in towards the American positions. When they kicked off their attack, panicked American soldiers would hit the clackers and be sending the shrapnel essentially back at them

@roryross3878

4 жыл бұрын

@@rzr2ffe325 Arrogance and racism lead American leadership to massively underestimate the Vietnamese people.

@rzr2ffe325

4 жыл бұрын

America decided to back a corrupt puppet government that had no chance of victory. The upper levels of government knew it was unwinnable, but committed lives anyways. Which is perhaps the greatest tragedy. Those politicians are the ones with blood on their hands. On all sides, lives were ruined forever.

I’ll take like 20 of these “novelty ones” to use as “paperweights” around my house.

@ArmyBoiSweat

3 жыл бұрын

I need paperweights to hold my roombas down

@a_Minion_of_Soros

3 жыл бұрын

*Places an order for 20 roombas

@whiskeytangofoxtrot4363

3 жыл бұрын

I printed one and put it on my trailer hitch

@fluffy1376

3 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🍻

@Losantiville

3 жыл бұрын

Might be more effective than keep out signs, or no salesman?

Just a note, in the military we use a backing for our claymores (thick tree, sturdy rock) I was told it is for two reasons, to protect the ambush line for backblast as well as to add effectiveness of the blast by projecting more of it forward...might give it a go next time and add some velocity to your shrapnel

@timmersd.8663

4 жыл бұрын

The reaction force is still directed backwards. The support in the rear will absorb that force, not redirect it forwards. The velocity will remain the same. Protecting from back blast is a solid idea. Telling a grunt he gets bigger bang for proper safety precaution is just added insurance to make sure he follows procedure.

@thomasconrad7998

4 жыл бұрын

Hold up, what about newtons 3rd

@jtkilroy

4 жыл бұрын

@@thomasconrad7998 Its already in play

@thomasconrad7998

4 жыл бұрын

@@jtkilroy Some force was directed behind the claymore, when striking a hard surface in that direction it should direct more of it back in the proper direction with the initial burst of force (in the proper direction) idk i could be wrong tho

@TheDeathChrist

4 жыл бұрын

@@timmersd.8663 It's Called Tamping it's a Well-documented phenomena.

The ATF agent when he saw the title: 👁👄👁

You could take advantage of 3D printing by producing specific pockets for the explosive and payload. Then you don't have to liquid nail the payload into the front of the housing, just dump it into the payload pocket. You could also add a pocket for a backplate. Let me know if you want some help on designing that for 3D printing.

@recklesssquirel5962

4 жыл бұрын

@David and here i was thinking they were 3d printing claymores to make getting them easier

@RayneValco

4 жыл бұрын

@Jones Ya the comments are cancer as every wannabe operator and basement troll is gonna come in and tell you why you are wrong when they have literally never built, produced or designed anything themselves. Ignore that asshole and keep trucking.

@doomaster4

4 жыл бұрын

@David agree tight pack would be better. Sounds like not enough explosive or pressure build up.

Maxim #62: Anything labeled "This end toward enemy" is dangerous at both ends.

@toddy2519

3 жыл бұрын

You might want to take a reading comprehension course for potty-trained adults because it says "FRONT TOWARD ENEMY", not "This end..."

I can confirm potty trained status. That is where I watched this entire video.

@jlambuth

4 жыл бұрын

*sniffle*.....a legit proud moment.

@CommiTsunami

4 жыл бұрын

"Blew up the toilet"

"We're not that channel, we're for potty-trained adults." Hell yeah.

@Dakota-je9os

4 жыл бұрын

I will drink to that

@johns3544

4 жыл бұрын

Best coment ever!!

@AdMan-The-LabRat

4 жыл бұрын

Teacher used both "Potty-trained adults" along with "clack clack" in the same legit sentence (3D Printed Claymore).

@joewaz100

3 жыл бұрын

The best part was the very next words was.... Alright let's on to blowing some stuff up lol

@broznkyra4853

3 жыл бұрын

Ive seen masks with 'Front Towards Enemy' printed in them..I DESPISE the masks and the orders to wear them...but I'd wear these...only goodvthing about the masks...no can see you laughing at them...

Me: Researching things to do with a 3D printer KZread: Hey how about a claymore? Me: O_O

@antkoz6370

3 жыл бұрын

kzread.info/dash/bejne/pqyJxbiNl7CbhZs.html

@KyleNotAKyle

3 жыл бұрын

@@antkoz6370 can't stop the signal

I’m still confused on how you just made plastic explosives without the atf killing your dog

@pjm204

4 жыл бұрын

They applied for and subsequently received an explosives license....

@sowhats.6100

3 жыл бұрын

not the sharpest knife in the draw, are you? They have this thing call "proper license".... lol

@yeeyee395

3 жыл бұрын

@@sowhats.6100 I'm more of a butter knife than anything

@skylersmall6322

3 жыл бұрын

@@sowhats.6100 Ah yes the "Proper license" aka the kill first list.

@BrokeWrench

3 жыл бұрын

They are a licensed explosives manufacturer. They sell to government agencies, police, and prisons

I haven't finished the video, but I had to comment on how perfect those pork comments are. I love y'all.

@steelcannibal

4 жыл бұрын

Haha! Was just about to do the same, but glad to see im not the only one!

@jonnyboy2504

3 жыл бұрын

That pork shit had me dying 😂😂

It's amazing how directional those are. I never realized it before, but there appears to be a very strong shaped charge effect going on.

@hellcatdave1

4 жыл бұрын

They are meant to shred you from the waist down so, it makes sense.

@Pest789

4 жыл бұрын

I meant nothing at all seems to go backwards

@housekilla457

4 жыл бұрын

Pest789 For every action an equal and opposite reaction. You want to send a bunch off steel shot down range with explosives, some of that force comes back. It looks like more because there is nothing to give resistance to the blast. It’s like the backblast from an RPG.

@Pest789

4 жыл бұрын

Did you somehow miss my first comment? I'm amazed at how little force goes backwards and how much goes forwards. It's a shaped charge. If you don't know what that is, don't give me a physics lecture. I was remarking on my surprise at how well it worked for such a relatively flat shape. I was not confused about what I was seeing.

@bryerhitt1700

4 жыл бұрын

Its not a shaped charge even shaped charges have a dangerous shockwave becsuse shaped chsrges are used for armour penetration and require alot of explosives clamores only have steel ball berings on one side of the plate in front of the explosives so the shrapnel flies in one direction. Its still not safe to stand behind clamores at all. There isn't even enough room for a clamore to be a shaped charge

I really appreciate the breakdown that this channel is for education purpose also that regardless of any bias this chanel remains neutral in all views except that "explosions are interesting". Thank you guys for doing what you do!

Dude how have i not found your channel yet!? Subbed instantly. If plastic explosives are too expensive you could try filling it with tannerite instead

I have been stalking this video like a panther on facebook awesome job

"We're for potty-trained adults. Alright, let's get on to blowing some stuff up."

That miserable looking weather - thought you were in UK lol 🤗

This guy does the best cosplay of "Needles" from Back to the Future II I've ever seen.

3D print your prototypes, then make a mold and cast the rest (which would allow you to cast your projectiles into it.)

These guys are living my dream.

So awesome! Enjoyed every minute of it.

This is why I love this channel and have respect for these guys...

Boogaloo Bois: “*OwO wat’s dis”

@agentorange8947

4 жыл бұрын

Notices your claymore OwO *CLACK CLACK*

@drxym

4 жыл бұрын

Hopefully those assholes would take themselves out or at least lose their hands in the process.

@gunman155555678

4 жыл бұрын

@@drxym lmao fuck you

@theDudeOfDudes

4 жыл бұрын

@@gunman155555678 poor little guy got your civil war inciting treasonous feelers hurt.

@gunman155555678

4 жыл бұрын

@@theDudeOfDudes lmao this country was built by treasonist people. the land was stolen after all. I still love it tho

"We recently registered an inert model with ATF". Made it sound like buying a pack of cigarettes 😂

Really enjoyed the show.

"The balls just tore it up in there." That is my hope. I have been practicing for when I will leave my anime pillow for a real girl. I am potty trained now so one step closer.

@jlambuth

4 жыл бұрын

Oh this legit made me laugh

@fredrickmartinez7047

4 жыл бұрын

I really enjoy your videos. I also like the fact that you have a good sense of social morality keep up the good work.

@rcflightseeker3488

3 жыл бұрын

AHAHAHA 🤣🤣🤣🤣🤣

Boy them yotes are gonna be like a Hoover vacuum cleaner come night fall, just subbed your channel, cause I like your take on things, thx for the vid.

I see broken clay pigeons laying around, suggestion for next time, get some of the hangers and put clay pigeons on the plywood so we can witness actual impacts instead of hard to see small holes. Also could work with the 'splatter' kind of paper targets. Love the videos

@RayneValco

4 жыл бұрын

Splatter paper would work great. Good idea on that one. The clay pigeons however break way too easy. They would all shatter from the concussion.

@jlambuth

4 жыл бұрын

We saw this comment and took it into consideration. We are revamping our methods of printing fragmentation patterns so you can see it better.

Man I love this channel, Good dude!

I love this guy he is like a tactical Jim carry

@SteelyEyedMissileDan

4 жыл бұрын

Wanna hear the most annoying sound in the world?! *detonator clicks* BOOOM

@joshuagibson2520

3 жыл бұрын

He looks like Beavis

Subbed just for the claymore roomba lmao solid work!

The Pumped Up kicks music made this seem so much worse lmao

Watching this post three years hence. Enjoyable guys! And nice to see you view all folks as human! Good job! Let's blow stuff up! LOL!

Best pyro friendly channel! Awesome video!

So since you guys seem to like things that go boom, In Vietnam we used the claymores to detonate Foo-Gas barrels. (that's a 55-gallon drum set at about a 30-degree angle loaded with a blend of gasoline and laundry soap. We used a pressure plate as a trigger. As a backup, there was also a Thermite with a tripwire near the pressure plate. On a side note: One night a water buffalo wander into the perimeter and stepped on the plate and tripped the wire and was shot and cooked and still standing. Anyway, the Foo-gas combo would be a fun experiment.

@tylerblubaugh5549

3 жыл бұрын

What was the laundry soap for my gusse is it was powder soap and it was to thicken it and turn it into napalm more or less

@jeffstrong4311

3 жыл бұрын

@@tylerblubaugh5549 it was to slow the evaporation of the gas and make it more into a paste so it wouldn't slosh in the transporting to the target zone

When he went off about the whole people asking to use pork and how this channel is for real adults Made me subscribe immediately Keep doing what y'all do glad to find this channel!

@chrish42000

10 ай бұрын

Except it had nothing to do with "vet bros" or southern people. We have Muslims in our army and most of us don't sound like hicks. He literally did what he was saying he doesn't condone. Low IQ like the original Muslim comment. Actually LOST a subscription.

y'all are doing the important work

What a great channel, I totally subbed!

Sweet! I got potty trained last week

"We don't pander to stupid people" You have earned my respect, sir.

@btmonz8383

3 жыл бұрын

Agree. I came here to say essentially the same thing. :)

Way back in the day like 30 years ago a friend of mine named Chris used servos from a RC car , the battery’s , the antennas & the remote combined with lots of flash powder & fine finishing nails sharpened at both ends to make a anti- personnel remote mine . God rest his soul , he died three years ago to a drug overdose , but anyway we set up half inch plywood like you guys did & blew his homemade anti-personnel mine up & WOW I mean WOW the finishing nails only had 1/8 of a inch sticking out of the wood & they were 1/2 inch long & that’s not the crazy thing about it , it was the range of how far we could stand back & blow that sucker , it was like 600 feet of pure RC range & a carnage of about 70 feet . Back then I thought that it would never work , but it did , like if you get hit by that you either going to die or spend some time in the hospital , very dangerous stuff . I still remember how he made them .

Good one

I wish the boards was painted or had paper over it to show the damage. I also wish there was a board behind the device to see what kind of damage would be done to whatever is behind the "this side forward"

@jlambuth

4 жыл бұрын

We realized that and we are now going to put up butcher paper and fresh boards to show the frag patterns. Also working on new videos soon showing the updated claymores, grenades, and other stuff. Your input helps us make better videos!

@isaac-vb1ng

3 жыл бұрын

Since its steel shot it would definitely penetrate very well compared to lead which deforms pretty easily

@SW-ii5gg

3 жыл бұрын

@@isaac-vb1ng or bounce better.

Try it again with a steel plate in the back to help direct more of the explosion forward

loved the Claymore. Cool channel. Strike Hold!

Will be sharing to spread the word :hates not cool, liberty is

@douglasmilburn3875

4 жыл бұрын

Just kidding, appears I can't share this?

@douglasmilburn3875

4 жыл бұрын

Jk I'm stupid. Shared lol

I bet that location reeked of death for a while.

Earlier Soviet directional mines used short rods and were probably more destructive. Granted they are were a hell of a lot bigger and bulkier.

Needless to say it'll take the enemy down. Excellent.

I love this channel. 😁

Just some potty trained adults doin the damn thang

(1:00) Interesting choice in home security. 🤔😄

Love the money shot at the end.

Love your videos! Reminds me of being in. All the way!

0:55 The serial number starts with BOOM.

"You should have used pork". LMAO. It's a demonstration people leave these guys alone.

@uppitywhiteman6797

3 жыл бұрын

Should have used live feral pig.

I like your attitude!

The meat pile at the end was the best 😁

"we're the channel for potty-trained adults" __ I'm stealing that line for all of my everyday interactions.

Would love to see this used on ballistic gel. Maybe get creative with the projectiles? Broken glass, rock salt, legos, pebbles. The usuals.

@jlambuth

4 жыл бұрын

Def doable. We are limited of course due to funding as majority of our money goes to other company efforts. We do gladly accept donations via patreon!

@jthemad1

3 жыл бұрын

@@jlambuth Looks at the kids lego, throws it in box. . . . . . . . . . Hello US postal service =D

Cover the wood backers with white butcher paper. You can see the difference test to test and utilize the same backers. Just a thought for future tests!

I've 3D printed a couple of these off of thingiverse and they definitely look the part. I'm in the process of printing a full scale RPG-7 and MG42 now lol.

*ATF I JUST GOT TO THIS VIDEO BECAUSE OF RECOMMENDATIONS*

"Spoiled meat man can't hurt you, spoiled meat man isn't real." Spoiled meat man: 6:49

@electrontube

3 жыл бұрын

I just want Meat Man on a t shirt.

@hokiepokie333_CicadaMykHyn

2 жыл бұрын

It's kosher...

I am amazed that you guys were able to get as good results as you did with that 3d printed shell the thought that went through my mind was would it have helped to add a bit more structural reenforcement to maybe direct a bit more force from the explosives into the direction of the intended danger zone.

Loved your comment on the pork to offend remark

Y’all the real hero’s out here.

Imagine if some scavenging bird like a vulture or a crow flys down to eat the meat when he detonated the claymore

@sighyawn54

4 жыл бұрын

why not quack it

KZread must be planning to set me up. Recommending these.

Very cool channel!

Y’all are actually great. Smashed that MF subscribe button.

I thought that was Jim Carrey in the thumbnail!!

@joshuagibson2520

3 жыл бұрын

Beavis

Nice video 👍

The humor made me sub lol

I see your claymore roomba and raise you a claymore drone.

@OrdnanceLab

4 жыл бұрын

Please post a link to your Claymore drone, as we really want to see it.

@joeydubbs763

4 жыл бұрын

@@OrdnanceLab FYI... your steel shot needs to be annealed first so its softer, more like a mild steel. Using hardened steel bb's is why you had them bouncing off the boards & whatnot it can be dangerous (as you're no doubt aware). Milder steel in bb sizes can be difficult to find so make a little pit filled with charcoal, get'er good & hot, add the shot & cover with coals & let 'roast ' until softened (bout an hr or so depending on shot amount to fire ratio). When you can put a good dent in the shot with a hammer you're pretty much there. Just trying to share my 25yrs in heavy metal demo not trying to tell you where the bear shits in the buckwheat... Enjoy👍

Last part reminds me of that Dead whale they tried to blow up

@uppitywhiteman6797

4 жыл бұрын

Hahaha I remember that!

damn, these are some impressive mines

Awesome

Thank you for the vetbro pork call-out. I'm so tired of the veteran space being taken over by those types of idiots, most of whom never actually went on a patrol or actually encountered a Muslim in their entire career.

"safety burm" That's a pile of dirt.

thanks, now I'm on a list.

@yeeyee395

4 жыл бұрын

mistergreene2 I’d get some body amor for your dog

@MiltonTucker

4 жыл бұрын

First time?

@mistergreene2

4 жыл бұрын

@@MiltonTucker no, unfortunately.

respect !

Found y'all on r/nfa. How much is coming out the back? The explosion looks like it goes both ways.

@jlambuth

4 жыл бұрын

Not much. The explosive is still going to direct energy in all directions. Majority went forward as intended.

Is the "Front Toward Enemy" a copyrited logo? Is that why your home made model reads "Front Towards Enemy"?

I salute and thank's Rescue Randy for his service 🤣

Regular claymores got a composite Bakelite mold that holds the bearings between the thol and the outside plastic shield . causes them to focus the projectile jet in concave shape

@BunnyArisu

7 ай бұрын

This is not true. They're secured in place with epoxy resin that shatters on explosion releasing the balls as fragmentation.

These are called invandrarkameror in Sweden which translates to immigrant camera.

I'm a religious activist who says things like "I love bacon" and "Please pass the coffee" and "I'm having some more vodka."

Finally, something to put on the front of my plate carrier

"We won't pander to you. we're not that channel, we are for potty trained adults"...I fuckin choked on my soda hahahaha.

How does blowing up meat stop animals eating it? "It gives it to the environment!" WTF? So the coyotes get to eat hamburger instead of steak. Problem fixed! 🤪😂😝🤣🎱

@7:21 Ya, you have my subscription now. Thank you for not pandering to stupid folk.

Some slow-mo of some of this stuff would be awesome!

What a time to be alive.

“We’re not about taking a joke, so if you want a channel with a sense of humor we’re not it. Un-sub and go have fun elsewhere.”

I thought Muslims didn’t eat pork so why would they be mad

@bricolmane

4 жыл бұрын

I'm a muslim and i was confused too lmao

An earlier version of the Claymore used a flat canvas bag filled with shot wrapped around a block of TNT. The shot was stitched into the bag so it wouldn't roll around.

the thing that always gets me about claymores is the back says back the front says "front towards enemy"