Scratch made high speed rotary tools are always good idea.

@hilltop4847

2 жыл бұрын

I wouldn't call a battery drill "high speed", I wouldn't put that thing in a dremel tho.

@joshuakuehn

2 жыл бұрын

One eyed jack agrees

@mynameis8211

2 жыл бұрын

Safe too.

@everyhandletaken

2 жыл бұрын

Just close your eyes, no problems.

@andreipobega3010

Жыл бұрын

​@@hilltop4847 ❤❤de

This will come in handy when Home Depot is closed during an apocalypse and I need a replacement wheel.

@lordloloman1397

2 жыл бұрын

@Wang Chung who needs power when you have...things 😎

@jddillon6842

2 жыл бұрын

This is what people did long before there was a Home Depot. A lot of self-reliance with a little bit of ingenuity comes in very handy when nothing else is available.

This made a perfect bone saw for my DIY brain surgery. Thanks

@jazzy7888

2 жыл бұрын

Lol😂😂😂

@curtmeyer4894

2 жыл бұрын

Grandma's knitting needle works perfect for a frontal lobotomy that makes a patient forget how to do useless life hacks!!!

@roberto3262

2 жыл бұрын

"Hello (fill in the blank)... wanna play a game?" ⏰

@juarezderrick9647

2 жыл бұрын

@@roberto3262 play with Deez nuts hahaha gottum

@gameseeker6307

2 жыл бұрын

@@juarezderrick9647 haha

Here’s a life hack my grandfather taught me 😃 “Don’t be an idiot making things harder than what they are”

@suardikatv2995

2 жыл бұрын

kzread.info/dash/bejne/gISKsZKCmLXPoLQ.html

@BCGT_Mikee_Dredd

2 жыл бұрын

Nice reply, still a tip though.

@koii-chan8416

2 жыл бұрын

my family when i make things harder than what they are: wth are you doing?! you're just making things harder! also my family when i make things easier: hey! life doesnt have a shortcut!

@81824

2 жыл бұрын

@@koii-chan8416 😐

@koii-chan8416

2 жыл бұрын

@@81824 lol :D

Don’t do that- the cap can break and fly off causing injury. Just buy proper rotary blades.

@HappyAlready

2 жыл бұрын

Right 👍👍

@lilperdi

2 жыл бұрын

No cap

@peckergaming27

2 жыл бұрын

That cap ain't gonna do shit if it flies off that drill

@coginthewheel779

2 жыл бұрын

Honestly the cap is never gonna break apart like a blade will. Maybe the bolt would break but I doubt it. And as far as the nuts loosening, youd be able to tell as soon as it happened because it would very wobbly and unable to use. Definitely not safe, but I qouldnt call it safer than a standard blade, I've seen those things break off and get stuck in peoples face protectors

@birdlady2725

2 жыл бұрын

Like they never break and fly off?

This will most definitely be used as an osha exhibit during a court case

@waltergilmore8255

2 жыл бұрын

Tru facts

@favoritemustard3542

2 жыл бұрын

56 👍s 4u... ...it's true!

@nicoletavictoriapavel9337

2 жыл бұрын

I didn.t thought about it. It.s true you right. It seems a useless improvisation but...

@about823jews

2 жыл бұрын

Why?

@PixelLife101

2 жыл бұрын

@@about823jews cutting discs can explode into shrapnel if not properly manufactured and maintained. This bottle cap could easily come off the end at high speed too

Perfect that will come in handy the next time I’m trying to cut thin PVC or a stick of butter.

@echo3568

2 жыл бұрын

Maybe a gummy bear if you lucky

@favoritemustard3542

2 жыл бұрын

...oh wow finally! Tell me, Opie, what is the difference? have always wondered - tyty, tyvm in advance op

@kellyfisher4243

2 жыл бұрын

Ayo shib gang

@melissakitelinger7543

2 жыл бұрын

Right looks so clean 😄

@bettybanos4389

2 жыл бұрын

Esta genial, que buena idea, gracias por compartir, saludos desde México

I'll be impressed when you turn it back into a bottle cap.

@joe-tatothepotatobiden47

2 жыл бұрын

they literally have a tool to crimp bottle caps down. It wont be that hard and it wont be very impressive

@scottwieland7832

2 жыл бұрын

@@joe-tatothepotatobiden47 Then fix the hole drilled in it too.

@viniciussales4264

2 жыл бұрын

@@scottwieland7832 someone gave you the opportunity to win twice 😂

@ford9339

2 жыл бұрын

@@viniciussales4264 lmao dammn right

@LetsTalkAboutPrepping

2 жыл бұрын

This turned out great

My grandfather used to do that, back then the caps were actually heavier metals so it worked great!

@Amin10XD

2 жыл бұрын

My grandfather died before I was born

@echoptic775

2 жыл бұрын

Damn it they dont even make bottle caps like in the old times amirite

@GekijoOkami222

2 жыл бұрын

@@Amin10XD ok.

@arsenhalilov7182

2 жыл бұрын

@@Amin10XD как

@arsenhalilov7182

2 жыл бұрын

@@echoptic775 как в

For this specific scenario, this is not such a bad on-the-fly way of making a rough hole. But I don't know if it's ever something you should rely on

@duke1281

2 жыл бұрын

Unless you drink a lot of bottled beer! 🍺 🍺 🍺

@merkga

2 жыл бұрын

You're right, I wouldn't rely on it but it's definitely a good little trick to use incase you don't have what you need and its at the end of the day or something and you want to save yourself a trip to the store... ya know? 🤷‍♂️

@-user_redacted-

2 жыл бұрын

I've been on plenty of job sites with Corona caps laying around, and I've already got everything but the vice on me all day. This could definitely come in handy.

@merkga

2 жыл бұрын

@@-user_redacted- Right! I definitely thought so..... 👍🖖🖖🖖

@GrimmDesires

2 жыл бұрын

I thought it looked decent enough to try anyway. Looks like it'd make a decent little PVC cutter

When you have to survive the apocalypse but have half the every-day hardware tools.

Gotta wear 3 safety glasses for this

@ayoungganteng972

2 жыл бұрын

Nirinrung

To lessen the likelyhood of having an aluminum fragment in your eye, throat or sever an artery or vein firstly, wear safety glasses. Measure the flattened caps diameter and half it for the radius and drill in the center to prevent those vibrations that will prematurely wear out the carbon dampeners and motor. That lopsided imbalance is that cap trying to fly off.

@1BigDaDo

2 жыл бұрын

Cool advice but I don't recall anybody asking

@toddbashem4018

2 жыл бұрын

@@1BigDaDo f off troll

@toddbashem4018

2 жыл бұрын

Honestly if I was in a "bush" situation and not having my dremel with cut off wheels etc. Your advice is exactly what you should do to minimize risk of any injury - well done

@clutchuwu1355

2 жыл бұрын

OSHA geek having alittle meltdown over here 😆

Or just go buy a $1-$2 cutting disc that same size. They’re not expecting expensive enough to have to “DIY” them

@PJBonoVox

2 жыл бұрын

@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN This whole thing makes me laugh. Guy made something to cut some plastic and the internet is just ragging on him for it. At least we know they have nothing better to do.

@patman0250

2 жыл бұрын

@Travis Hanks lose an eye on a spinning drill? Bro you know how long it probably took him to cut that. There's no way a drill spends fast enough to throw anything anywhere.

@patman0250

2 жыл бұрын

They're not expecting expensive enough? That makes no sense.

@joseppi4435

2 жыл бұрын

@Travis Hanks yeah that looks dangerous as hell using a soft metal that most likely break n fly everywhere

@abelis644

2 жыл бұрын

@Travis Hanks He cut plastic, not steel.

In Philippines, this isn't a "life hack", it's a necessary skill for one to be called "the handyman"

@emersonsrandomvideos248

2 жыл бұрын

Yup. In fact i do such feat long time ago with a dremel. Hirap mkabili ng ganyan ang mahal kaya life hack is the key! 😂

@ayyongnolasco3680

2 жыл бұрын

If it works it aint stupid sabi nga ng iba eh. If it doesnt, yeah its stupid

@electromerk

2 жыл бұрын

@@ayyongnolasco3680 very true!

As kids in Montenegro, we had a local spot where all the big name singers would come out once in a while to please us peasants with their music, and we would scavenge all the bottle caps throughout the night while trying to enjoy the music. The owner of the location would give us non alcoholic drinks for returning as many bottle caps as we could by the end of the event. Good times

@shacke1s574

2 жыл бұрын

Cool story bro

@DrazCo786

2 жыл бұрын

We had a similar game in Serbia

@AdmiralChakotay

2 жыл бұрын

@@DrazCo786 😂

@ac8485

2 жыл бұрын

At a festival I went to they did this with all recyclable litter and I would see young and old children picking through bins to get the waste so they could return it for money or drinks, it reduced the waste altogether by loads

@joseze3056

2 жыл бұрын

@@AdmiralChakotay .

And just think if he hadn't folded the edges flat, he could have a 25mm hole saw. Lol.

@low-keyrighteous9575

2 жыл бұрын

two in one attachments !!!

@TheEaglekun

2 жыл бұрын

@@low-keyrighteous9575 three if after its used it is used as a washer

"Ever so often just for fun I do things that can cause me harm." ~Guy with deadly bottle cap blade

You can also cut PVS with paper if it’s spinning fast enough

Actual rotary cutter tools with multiple heads cost about $15.

@TheRealMinotaur667

2 жыл бұрын

Yep. And they're lightyears more precise/accurate with cutting than that. They'll also last for many years too.

Imagine asking for scissors and your friend who's obsessed with diy pulls this shit out

@letal393

2 жыл бұрын

Gold

@S.P.B.222

2 жыл бұрын

😂🤣😂👍

@ianmangham4570

2 жыл бұрын

😄

@araragikoyomi8559

2 жыл бұрын

Now that's some sharp shit

@Abhayjauntvolg1119

2 жыл бұрын

. 0

Quick, someone, alert the safety police! Oh wait....I see they’re already here in force.

@PJBonoVox

2 жыл бұрын

According to most of the morons in here attaching a bottle cap to a drill will generate so much potential energy that it'll rip a hole in the fabric of space/time and suck us all in.

@kgk7987

2 жыл бұрын

Hahaha well said, I am sick and tired with all these "women ".

@sheepdog271

2 жыл бұрын

The Safety Swat Team has entered the chat in full force 👷‍♀️👷‍♀️👷‍♀️

@bendaniel6245

2 жыл бұрын

I mean, I don’t care about the safety- just that it’s stupid. Like really dumb. L

@dynoshane2651

2 жыл бұрын

Onya ryan,

Now I know why I've been saving all those beer caps for.

Chances are, if you have all the tools he used to perform that 'hack' you already have proper cut off wheels.

@tristandauod

2 жыл бұрын

I was thinking the same thing lol

@sharbel6357

2 жыл бұрын

Does it hurt when your that smart ?

@hilossrt4

2 жыл бұрын

Not everyone is rich enough to buy cut off wheels when they need them. Don't impose your privlage on everyone. One can use a drill, hammer, and vice for many years don't assume just because someone has basic tools they can buy whatever they like.

@hopefilledsinner3911

2 жыл бұрын

@@hilossrt4 good comment but this guy had chubby fingers and a gold ring. My guess would be he could afford it.

@MrSandmstricker

2 жыл бұрын

@@hilossrt4 thank you for saying what i was thinking all the negative comments the bs from people is nonsense

Let's see how long the thing lasts. This is one of those tips & tricks that I wouldn't recommend.

@nexus8516

2 жыл бұрын

It's quick and free I don't think this is designed to compete with a diamond tipped rotary blade

@muriloaraujo6511

2 жыл бұрын

At high velocity I suppose it would break, so that could also be a danger

@jonchapman6821

2 жыл бұрын

@@muriloaraujo6511 High velocity? It’s attached to a drill!

@elielbourrelly9902

2 жыл бұрын

More importantly than that, its not flat. Its gonna vobrate and the cut wont be precise and as said before, there is more danger of ether breakage or the tool walking and potentially hurting you if you dont hold it strongly enough.

@brandonreid4511

2 жыл бұрын

@@elielbourrelly9902 I'd definitely agree...if it wasn't just attached a cordless hand drill 👍 you would have to be some kinda of clumsy to hurt yourself with this setup haha

When we were kids, we try to find bottle caps and make it into a blade then try to make it a toy(the toy where you need a cap and a string, then when pulling and then relax it spins fast) then we try to battle each other who can cut the other person's string. It was fun

@FLABees

2 жыл бұрын

I was looking for this comment. I did that in my childhood as well. We got to do it from shaving blades too !

@timmykkgb

2 жыл бұрын

@@FLABees sounds safe lol

@MarioR23

2 жыл бұрын

I did it too

@aunmanoi

2 жыл бұрын

Wo same here

@joel.ha.

2 жыл бұрын

@@timmykkgb safe is overrated. Live a little

I'm replacing a toilet flange and this is absolutely perfect, well done good sir!!!

Or y'know, you can just buy a dremel, You can literally find one for $20

@Aatell764

2 жыл бұрын

And cut PVC for a hundred years

Oh I thought it was going to be used as a washer wich I would have agreed with. Instead, I got an accident waiting to happen tutorial.

@ChrisTheCarBuilder

2 жыл бұрын

Oh so you think that's work as a washer.. interesting. Remind me to never ask you to do anything mechanical for me 🙄😂

@morandalec3869

2 жыл бұрын

@@ChrisTheCarBuilder a washer is literally just used for spacing. This will work fine. Take your ego and go please.

@cake6420

2 жыл бұрын

@@ChrisTheCarBuilder Well it can be a washer for something other than big metal parts on a car genius, like plastic, wood, fiberglass, PVC pipe, ect... So remind me not to ask you for anything that involves not jumping to conclusions.

@terradagon258

2 жыл бұрын

A drill doesn't spin fast enough to break it, however if someone did the same thing on a Dremel, that's where I could see someone getting hurt

@cake6420

2 жыл бұрын

@@terradagon258 Nonit could very well break it, spinning it by itself isn't the problem the problem is it's improvised tool doing something it shouldn't have been doing in the first place and I bet it would either come undone or crack on something harder.

Imagine if he knew attachments designed specifically for that existed

@joshrepik

2 жыл бұрын

At first your comment didn’t compute until I changed inflection in my head and it made perfect sense

@nigelmansell8864

2 жыл бұрын

There’s no shops on a desert island tho only bottle tops hammers and vices I think that’s who it’s aimed at

@fireworkstarter

2 жыл бұрын

@@nigelmansell8864 but there is a dremel, drill bits and a camera

@nigelmansell8864

2 жыл бұрын

@@fireworkstarter whoosh

@fireworkstarter

2 жыл бұрын

@@nigelmansell8864 sure woosh me atleast im not as retarded as the people atempting the video

Now this one i'm gonna try! Very cool. Thank you.☺👍

Well I myself found it interesting. When you ain't gotta dime and times are hard. Some have never had to live that.

@zacksguitarhacks6390

2 жыл бұрын

People don't actually understand what the word privilege means

@hilossrt4

2 жыл бұрын

@@zacksguitarhacks6390 isn't that the truth.

@phantommedia9964

2 жыл бұрын

How do u afford a dremel/drill but not a cutoff wheel?!

@hilossrt4

2 жыл бұрын

@@phantommedia9964 its not terribly hard to fix a drill that you find in the trash or at a yard sale for cheap or free. Cut off wheels wear out quickly and one can go through them quickly. Anyways my point is it's not difficult to get a drill and have it working for years. Infact my own drill cost me like $20 and I have had it for over 15 years. Compared to how much I have spent on cutting disks I definitely spent hundreds of dollars on them over the years.

@travisrose2225

2 жыл бұрын

its called going to work and not expecting society to take care of you.

Always wear eye protection. Also why spend so much time flattening it that way when you have a vise right there?

That’s a nice trapezoid you cut out there

@shleemie1914

2 жыл бұрын

If you squint it's actually a perfect circle. Must work well!

Not for nothing; it would help to have a simple jig to get the hole in the center, and removing the messy burrs before adding the bolt/nut to secure would allow it to sit perpendicular to the rotation. Lastly, thin pvc like that can be cut using a simple exacto knife, without the radius over cut. Just my 2 cents.

@jonne7725

2 жыл бұрын

I've tried cutting cable channels with a knife and i wouldn't wish it upon my worst enemy

Went to the store for a drink with A cap 😂

DiWhy is not something I was hoping to see here. Just buy a damned dremel

@MrBrad12435

2 жыл бұрын

DIY hospital visit

@AmirKhan-kx8yw

2 жыл бұрын

@@kishorereddy6950 pp0

@kietduongtuan7387

2 жыл бұрын

@@kishorereddy6950 lllll

@arnimzola1139

2 жыл бұрын

Most DIY crafts can just be crap you can buy. Do you know what DIY means?

@irish1squirrel

2 жыл бұрын

@@arnimzola1139 I am aware. I also have a functioning brain and can recognize when a "DIY project" barely saves you any money or time and puts the user at significant risk. Once you reach the point where the requirements for the DIY project cost more than the tool it's replacing AND is more dangerous, just don't fucking do it. This shouldn't be controversial.

Wear safety glasses!

I watched this *knowing* it was going to be stupid and pointless. Why?😥

@Bruce6001

2 жыл бұрын

Because you have no life and your a loser, no offense 😂

@maggs131

2 жыл бұрын

@@Bruce6001 I was angry seeing such a mean comment but the longer I thought about it I was angry because you are %100 right.

@Bruce6001

2 жыл бұрын

@@maggs131 true

This is so useful! Now every trashcan is a hardware store!

Little known fact, actual rotary blades cost less than a case of beer

@mcgee9777

2 жыл бұрын

@Robin Truby I mean if you want to risk losing things that you probably shouldn't...

@dangrimes5078

2 жыл бұрын

@Robin Truby no

@dangrimes5078

2 жыл бұрын

Personal protective equipment?

Almost anybody with the brains to do such a thing has the ability to buy the right tool for less than a quid

@D3m0manTF2

2 жыл бұрын

@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN This is not a lifehack but a dumbass showing people how to get hurt. If you can afford a drill but not any attachments then there is no point in having one. Its like buying a car and then using a "lifehack" to fix a wheel using something dumb like empty cartons of milk.

@GoogleUser-yj1wy

2 жыл бұрын

Yeah but if u live hour from the hardware store.....

@hardcore10987654321

2 жыл бұрын

It'd take less time to grab a sharp serated knife from the kitchen. I've cut trunking many times with a knife. It's not difficult

@hardcore10987654321

2 жыл бұрын

@THISisNOTaPERSON ITSaCHANNELcozITSnotHUMAN get over what? I made a short statement. You wrote a whole paragraph of which I was bored half way through. I think you to get over something mate.

@J242D

2 жыл бұрын

@@D3m0manTF2 nigga spittin fax lmao

You should use the cap to cut out a bottle opener to get another cap. Perfect loop opportunity.

@-user_redacted-

2 жыл бұрын

No need for the bottle opener when you have a pair of kleins

Yesss . . . .thank you . . out in the field you don't always have the right tool handy all the time . . this cutting wheel is super brilliant and come in handy if you dont have your grinder or wheels for it . . thanks again . .

It's aluminum. It's weak. It will break. Shrapnel can hurt you badly. Just buy the proper gear.

@tj-zc7ce

2 жыл бұрын

Aluminum is soft, it might tear but it would deform before it got to that point, its not brittle enough to snap and fly across the room

When the right tool is in a drawer you would have to leave your chair to reach.

@monet6944

2 жыл бұрын

This is truly the perfect scenario to this solution lol

The first thing I thought when I saw the bottle cap was "I bet he's making some sort of shit Dremel cutting disk" ...yep

Nice! Like a little Dremel wheel! I can dig it.....👍

A life hack needs to be easy and accessible to anyone. He is using very specific tools for specific professions. Plus that doesn't seem safe.

@akx1302

2 жыл бұрын

A drill and pair of pliers is specific? I think the Dremel head is dumb but lmao

A bottle cap is not DESIGNED to be a cutting tool. Hope you're wearing safety glasses......

@user-sj2vg8hb5q

2 жыл бұрын

bro... its not gonna kill you

@carval51

2 жыл бұрын

@@user-sj2vg8hb5q it shard might

@mCblue79

2 жыл бұрын

@@user-sj2vg8hb5q Nah, it probably won't kill you. Blind you, blind your kids, maybe.

That Cap is a dollar in Fallout And there you go bending it!!

I'm installing a double din stereo in my truck, and have been looking tools other than a dremel tool. I got caught up in these KZread shorts, and thank god this came across. I never woulda thought of that. Freakin genius

@PixelLife101

2 жыл бұрын

Just buy a dremel they're not that expensive and a set of bits and bobs for em are like 20 quid. It's worth the 100 quid in total for safety and ease of use

This is the type of sht you would do if you were stuck on a island and needed to get home...

@dojoparsnip9905

2 жыл бұрын

stuck on an island with power tools. i want to see that.

I thought it was going to be a washer

Kamaal ka jugaad 👍👍👍

I mean if it's 2 am all the stores are closed and you really need to get off those handcuffs? Lol. Kinda cool though if you're really in a pinch and MacGyvering is the only option.

Just wait for the day when it shreds and a pieces flies into your eye lol

Итак... Я птжалуй первым буду... Самоделка на 250 полуляхов из 250

@aboutThatBeerIOwedYou

2 жыл бұрын

На 251

@user-it5yc4rc2z

2 жыл бұрын

Доктор пишається тобою.😉

@nickhammac

2 жыл бұрын

What the fuck does that say??

@UselessZero

2 жыл бұрын

@@nickhammac there's a measure of "DIY bullshit" measured in "polulyah" with a cap on 250. This thing is measured 250 out of 250.

@user-it5yc4rc2z

2 жыл бұрын

@@UselessZero Yes.

Wow! A life hack that is actually useful and I can actually see myself possibly using! 👌👍

I suppose we can use a sardin tin can cover as well. This is so cool😍

OMG you invented a tool that cuts wood. Let's Name it "saw"

@uraphag8314

2 жыл бұрын

I think the Simpsons already did it

@LUC9XBOCT

2 жыл бұрын

Do you sure this is wood?

DIY are cool and all, but this one a little over the line, this ain't safe. Rotary blades are designed for this, caps awernt. You do you though

Shark tank , somebody Jeff? , Larry Branson? Buffet , mark , musk , gates , dang

Now all we need to do is get the guy who can throw cards at 90sum mph

Trying to go through all your posts but you post the same clips 2, 3, 4 times and it's annoying.

@denerandre8914

2 жыл бұрын

Dude gota catch those views

Could you imagine a world where rotary tools, potentially made for a specific purpose like this, with interchangeable bits existed, potentially made by a company founded by Albert J Dremel, or even off brand tools with nearly the same purpose and build quality, potentially with even better build quality? Could you only imagine being able to have more control and dexterity with a small portable device, and maybe being able to go to the nearest store that supplies hardware and or freight from the Harbor? Lmao these life hacks get worse and worse every time I accidentally stumble across one.

@gamer2101

2 жыл бұрын

I wish such tools were real!!

Crude but functional, and more importantly it teaches viewers to try thinking outside their normal comfort zone.

Fantastic display of ingenuity! 👌💯

Дортору не отправляйте, он ещё от последнего видео не отошёл...

@J242D

2 жыл бұрын

I agree

@jgbalboa

2 жыл бұрын

Absolutely

Великолепно :👍

@anjuunde2508

2 жыл бұрын

ओ

Lolz This reminds me of a fight competition when I was much younger!

These are the kind of people you need around for when the zombie apocalypse happens.

If it requires tools then it's not a life hack.

This cut is so clean I would eat on it

@Pyth110

2 жыл бұрын

You've got some low standards

@guillaumelm8853

2 жыл бұрын

@@Pyth110 No I've got an high irony level 😁

Better quality then a Dremel..😂

Seriously how simple yet how clever 👏🏻

Boy, imagine if someone showed him what a box cutter is...

I wanted to call Doctor DIY, but comments are warming my heart. Diy is a total crap. Самоделка - полная хуйня, 249 полуляхов/250

@tokyo_3498

2 жыл бұрын

😳👉🏿👈🏿

@dairinpalacios298

2 жыл бұрын

@@tokyo_3498 ñ1ñ

@onmoominmind

2 жыл бұрын

орунькаю

@jackbright3854

2 жыл бұрын

Не ну в принципе, это работает. Но вопрос в том, нахуя оно есть. Так что где-то 240 полуляхов/250

Talk to a patent lawyer. You know how many bottle caps are out there and being used as saw blades without paying royalties? LOL

As soon as I saw a pair of pliers and a bottle cap, I knew he was about to make a little saw.

Todos tenemos ese tipo de cosas hasta en el baño, no? Por si mientras cargamos nos Dan ganas de crear una mesa.

@otrocanalpedorrodeyt6016

2 жыл бұрын

Chale, el unico comentario en español :'v

А вот это пожалуй один из самых полезных лайфхаков и самоделок жизни

@dmitryscotch

2 жыл бұрын

Доктору отправь чтобы увидел

🤔 I'm trying to remember the last time I had any drink that had that style of cap

Levem em conta que o vídeo está acelerado, além do material que está sendo cortado, por isso aparenta ser tão fácil o corte. Nao deixa de ser um bom truque que facilita um corte pequeno e preciso, se comparado com o uso de estiletes, ou a própria broca, nesses serviços.

Не, ну а вдруг инструмента под рукой не оказалось, пробка то ведь всегда рядом лежит,так ведь, или только у него так?

@user-mp1ro6md2n

2 жыл бұрын

@@ultraradijatorius таких маленьких фрез в продаже практически нет, да и стоят немерянно для одноразовых работ. А иногда нужно вырезать зигзагом гипсокарон, или квадратное отверстие- одно, приходится ножем или пилой продалбывать- прошкрябывать, при этом рвется задний слой бумаги. А в прикрученном листе ни ножевкой, ни лобзиком не влезешь.

Ну если тебе нужно зделать "дырку" то штука полезная а от если окуратный пропил ну......

@KG-Girl

2 жыл бұрын

Аккуратный пропил тоже можно сделать, если руки растут из правильного места

@kelderos

2 жыл бұрын

Боюсь это приспособление годится только на делание дырок в себе. Крышки даже близко не рассчитаны на то, что какой-то дегенерат пойдет ими пластик пилить.

@hectortoro7527

2 жыл бұрын

Que maravilla

This guy fixed my coo-coo clock with an old sponge and a leaf spring... - he's THAT good

Damn broke the internet and all of Dremels sales 😂🙏🏼

Будет смешно когда крышка лопнет и воткнется в глазик, потому что это не диск для пилы. Не делайте подобного дома, это идиотизм )

@Palladium1010

2 жыл бұрын

Да ладно. Попробуют и больше не будут. Глазика-то два.

@user-mp1ro6md2n

2 жыл бұрын

Как раз фреза лопнет быстрее. Лопнет крышка, установленная в УШМ, а в дрели она только сомнется, так как сталь пластичная. Да и пилить нужно для разрушения крышки металл, что никто делать не должен. Ну и в первую очередь смотреть нужно только сбоку, а не сверху на любой рез.

OK this AI thing is getting creepy. I wAs just thinking about this yesterday. Just a little bit different. We used to do it with strings.

Heck Dremel and their tool truck prices! This is an excellent idea! Maybe amp it up with a soup can lid? Lol

When i was a kid, I used to flatten them glass bottle caps and just make a weapon out of it

@zigzag7194

2 жыл бұрын

👀

If this is a lifehack then normal people are the anti hack system

Waiting for the moment when it will fly in someone's eye!

😲 this crowd is tough !! They just don't want to admit they can't wait to try it 🤭 Great hack...thanks for sharing ☺️

I thought he was just gonna use it as a washer lol

Cool idea for emergency situations. Thanks👍

NICE..., " An Old Man Once Told Me Dont Let The Snow On The Roof Fool You.."

I think you must go outside buying bolts and nuts for that DIY CAP BLADE and find BOTTLE CAP. HAHA

Looks like a tactic they use in federal prison work shop. If they didn't have a Dremel.