Man whoever told them to wire it this way should not be touching any vehicle wiring....ever.

Love the crimping method with plyers

@Elpajarito90

3 жыл бұрын

they are crimpers, if you see they have numbers on side for the size of the wire so you don't cut through.

Probably easier to use add a cercuit tap fuses connectors at the fuse box. And run extended wires. I never like cutting into factory wires.

@eyoboyeegaming1187

3 жыл бұрын

It’s easy to pull a fuse

there have engine off on system?

in the video the blue light doesn't continue to flash. Same that I'm getting.

❤

Anyone installing in a Silverado should skip all this and pull the top glove box, it has 2 t15 torx screws. the wiring harness that runs underneath it has a fat red wire and a pink wire, those are your power and ignition. You can ground to one of the bolts on the frame behind it and velcro the unit to the ac duct beside the box. Also, the T splice described in this video would be highly prone to failure. Please look up a video on doing a proper T splice.

Good installation

Id putt t taps with a zip tie or military splice with tesa tape not black tape comes off.

The AT3 never worked the company wont take it back. Wont return a phone call or email I got taken for $86.00.

@wakandafoodtruck4758

Жыл бұрын

Is there a monthly fee

Solder your connections.

I wouldn’t think this installation method would be recommended for the average person. It’s likely most will cut through the wires.

@OsirisNeits

Ай бұрын

Or for a person with any idea what they're doing. Or anyone else.

Does this tracker require a monthly service fee?

@VIP854

5 жыл бұрын

Yes

@_thacieng

3 жыл бұрын

@@VIP854 well shit what?

@Elpajarito90

3 жыл бұрын

@@_thacieng it comes with 3 year subscription, so every 3 years just buy a new one, the connection is ready so its easy. so basically $20 a year

Bad technical advice cutting factory wiring ,fuse adapter with tail to a connector

Lol

Wired by a COWBOY.