LINKUP RJ45 Cat8 & Cat6A Field Termination Plugs (Tool-less) Step-by-Step Easy Assembly Guide
Please visit our website LINKUP.ONE for more product details, or to obtain a promotion code.
The assembly of LINKUP RJ45 Plugs are pure, simple and easy. Most network professionals install within 1 minute.
This video walk though will help you to get the job done easily and fast.
Use LINKUP Heavy-Duty Die-Cast RJ45 Plugs to get the best performance out of your network cables, i.e. 40Gbs for Cat8 and 10Gbs for Cat6A.
You can use this for Cat6A, Cat7, & Cat8 LAN cables with 22AWG ~ 26AWG wires. The metal housing provides the most robust construction which works the best for Shielded Foil Twisted Pairs (S/FTP) cables.
This keystone is also reusable. You can use it for today's Cat6, Cat6A, or Cat7, and reuse it when you are ready for Cat8 speed.
Пікірлер: 38
Excellent Video ! A comment people made: Review the best tools you recommend to use with your cable products.
In the video you say your going to use the A arrangement, but then use B.
@Imrankhan-cr4hg
3 ай бұрын
The current scenario of cabling has the habit of 568B standards so she has gone with new formation.
Donde se puede adquirir gracias
Hi, cat 8 connector it's compatible with 6a cable? I have cat 6a cable, it's the same as this one (cat6a S/FTP)
@unclethanatos
2 жыл бұрын
Yes, it’s compatible.
Hi, im getting an cat8 cable today, do i need to buy additional connectors or can i use the already pluged in connectors?
@hamzahbatha1552
3 жыл бұрын
Is it on a reel or is it a patch cable
@LINKUPTechnologies
3 жыл бұрын
Sorry for the late reply. You will need keystones or plugs. The cable on the reel isn't terminated yet.
@LINKUPTechnologies
3 жыл бұрын
It's on a reel, or coiled in a box to be precise. It's not a patch cable. You will need keystones or plugs to terminate the cable.
@LINKUPTechnologies
2 жыл бұрын
If you have purchased the patch cords, you do not need to buy extra plugs or connectors. For 50 meters and 100 meters bulk cables, you will need to purchase plugs/jacks for terminations.
Well I tried and my cables ended up crossing. The orange and the green cross eachother and the blue and brown cross eachother. I don't like it but I can't make the cable in any other way.
@R2unleashed
2 жыл бұрын
Same problem here
Please let me know, is there connection between shield/copper tape/plug cover and GND pin of cable?
@LINKUPTechnologies
2 жыл бұрын
The shielding wires are connected to cooper tape which is directly connected to the plug.
Hi, can I use this connector with Cat7 cable?
@LINKUPTechnologies
3 жыл бұрын
Not recommended as most of the Cat7 in the markets are fake and also too thin to be used on these premium Cat8 plugs (22~24AWG) recommended.
@Herofmine
3 жыл бұрын
@@LINKUPTechnologies I’ve purchased 23 awg pretty expensive cable should be real one, ordered these plugs hope it will work with cat7
Hi, what is the difference between 568A and 568B?
@Damitsall
11 ай бұрын
2 pairs are switched. I forgot what number they are but the green and orange pairs are switched. In the US everything is using B. In fact from what I understand most places use B. From what I understand A is sometimes used in places where it might be used for phone lines too because of the way the pairs are arranged.
@pariahzero
10 ай бұрын
Fluke Networks has a good knowledge base article; the summary is that T568A wiring pattern is "preferred" because it provides backward compatibility 1 & 2 pair USOC wiring schemes. T568B matches the (older) AT&T 258A colors. The US Federal Government requires T568A for wiring under its contracts. For most of us, what really matters is using the standard that best matches the pairs in the cable you have - so follow the advice in the video - use the pairs that work best for the connector, and use the same standard on both ends.
The adhesive of copper tape is not good, it is insulating material, the mesh shield will not be grounded. You must improve this one.
@LINKUPTechnologies
2 жыл бұрын
Thanks for the suggestion. Alternatively, you can wrap around the shield/wire around the cable without using the cooper tape.
@Damitsall
11 ай бұрын
@@LINKUPTechnologiesFor what you guys charge for this stuff, it should be perfect.
She forgot to mentioned how important is wire cutting tools that you cant find in lowes or home depot. No way to cut that bottom wires flush properly without that tools
Hi can I connect this on my ps5 to my router?
@LINKUPTechnologies
3 жыл бұрын
Yes. You could even it is over killed.
@LINKUPTechnologies
2 жыл бұрын
@@bm_wuratli6883 What is Cat5a?
Yeet
3:15 wtf....
“Tool-less”, except you need wire cutters, wire strippers, connector compressor.
“Tool-less” 🤷🏻♂️
@LINKUPTechnologies
3 жыл бұрын
Yes. You can complete the termination by hands only. No tool is required.
@jashqua5704
2 жыл бұрын
@@LINKUPTechnologies how can we replace the Ethernet jack
@LINKUPTechnologies
2 жыл бұрын
@@jashqua5704 Can you be more specific?
Very hard to understand They have much easier ones Out today
@LINKUPTechnologies
3 жыл бұрын
If you find these are hard to understand, you don't need these connectors. These are designed for professionals and people who are serious about their 5th-Gen 40G network.