Hey the truth is you make it work. Glad you took time to share! Guys it’s not always going to go smoothly but Joe just killed it with the basic know how. 🎉

Sounds like the x6 is the most Reliable. Imagine buying a super pump with No Warranty. Anyone else would have been Screwed. Thanks for your Videos.

I have wondered how the Water Boss gun would do with a 12v. Now I know. Thanks 👍

Gotta have options in this industry! The simplest of problems will shut down any pump.

5.3 gpm remco at $179 is the best. Just slap another on when it fails.

Cant wait to see what the rig looks like next season!!

@powerfulimprovements

Ай бұрын

💪🏼💪🏼

When stuff craps out, definitely know how you feel when these systems fail, especially this time of year! Take care bro and keep it simple:)

@powerfulimprovements

Ай бұрын

Thanks, you too!

Good to see you again sir!

@powerfulimprovements

Ай бұрын

Hey, thanks!

I Use 24v Everflo pump through Midwest 1 inch blend manifold with 3 way remote control and flushes system, use comet p40 for water rinse mode only no chemicals through the pump at all only water.. also has remote controlled stop/start running 5/8 hose .. , best system ever no problems at all super quick on jobs .. cheers David from Australia 👍

@powerfulimprovements

Ай бұрын

🔥

I have 5.5 Remco, 24v and a Gas Roof Pump on my rig. Gas roof pumps are just on another level. I used to be DS guy for years. Now I don’t even downstream much anymore. Gas Roof pumps are just superior in every way when compared to electric systems. My 24v started leaking, I replaced one of the pump heads and now I only use it to transfer. 5.5 Remco is still going strong 2nd season. My D30 Gas roof pump worked great for 3 seasons with 0 issues. I’m now getting D40 to replace it.

@Hurricaneharry518

Ай бұрын

I put a p40 in place of my 24 volt. Game changer!

@powerfulimprovements

Ай бұрын

Maybe next season

@softwashscience

Ай бұрын

Can’t set the gun down tho and there are times you gotta set it down. Or maybe you have a remote control electric start on your gas roof pump?

@Hurricaneharry518

Ай бұрын

@@softwashscienceI bought my setup from Texas pressure washing and using the sesw 1” metering valves. I have the remote sh& soap valve. Texas has. I also bought the roof pump connection kit from them. It works great. Has 25’ of bypass. I can be off the gun for some time. No issues

@johnhall7940

Ай бұрын

@@softwashscience you can for about 5 minutes. But then you could squeeze the trigger for a few a seconds every few minutes and you’ll be fine.

Has anyone herd of the new Zeus pump by Remco 10 gal And for the life of me I can not figure out why they keep piping the discharges off of SESW pump to a Tee, talk about flow loss they should use Y fittings.

@vulcanpressurewashing

Ай бұрын

Yes we know about it. Its on there website. They will also have a variable speed controller in the future. Also Its 14GPM not 10.

Thanks for showing how the Water Boss runs with a 12v Been thinking about picking it up

@powerfulimprovements

Ай бұрын

Any time!

Jimmy told me what he is working on to replace the X6, and im hoping its what youre getting. Cant wait to see it run!! 👀 *hint* "12v diaphragm"

@powerfulimprovements

Ай бұрын

Secret information

Job well done!

@powerfulimprovements

Ай бұрын

💪🏼💪🏼

Buy a comet P40 from Midwest. 3 years running no issues. Add gas and send invoices

@powerfulimprovements

Ай бұрын

Maybe next season

@Baysideclean_co

Ай бұрын

@@powerfulimprovements understandable. Far less electrical issues and “dicking” around with batteries.

Since the beginning. I’ve been running the everflo 5.5g pump, and replace it every year. $145. have 2 as backup. Cool little pumps

@powerfulimprovements

Ай бұрын

Certainly

I’d like to try that water boss gun on my 12v. Although I’m plumbed at 1/2 inch and 5/8 hose.

@bigrobbigrob7156

Ай бұрын

Do you think it will work?

Good to see ya Joe

@powerfulimprovements

Ай бұрын

@@michaelbrittle5157 ✌🏼❤️

Let’s be honest Joe- sesw customer service sucks and everyone associated with them

@powerfulimprovements

Ай бұрын

We’ll see

@kylecrisman9230

Ай бұрын

Yea finally someone else sees it. Iv never bought anything off Cody nor will I ever I don’t get the hype with him at all

@RickHamilton-nk5pi

Ай бұрын

Yeah, but you don't have 13k+ subscribers. Ole C.Y. will do everything he can to get Joe back up and running for advertisement.....and you can't blame Joe one bit for using it to get things here and there as every dollar saved counts!

@johnmakbuilds

Ай бұрын

I haven’t purchased any “big” items from them. We assemble almost everything but buy parts from various vendors and everything from Nozzles to manifolds to metering valves from them have been excellent quality. Responsive on emails. Because we buy parts that don’t require much for service I can’t say anything on service but they don’t skimp on quality. New products can have issues at first. We have seen this w automobiles for 50 years so we need to be fair on judgement so quickly. Not defending anyone. Just speaking as a business owner and how I hope our customers would think as well.

@indigo_home_services

Ай бұрын

I heard all the negative talk a couple years ago on both sides. Knowing there are a lot of people in this industry that still get mom to tie their shoes, I placed an order. I’ve ordered many more times and never had any issues and the products are great. I guess it’s further proof that there is no such thing as bad advertising.

You just need to jump the battery with a good 12 volt battery with the 24 volt charger on to trick the charger to start charging just for 15 minutes or so. Residential chargers have a failsafe in them.

@powerfulimprovements

Ай бұрын

Good idea

It’s mid season and glad you’re still busy. Ideas if you can recruit someone to do the errand. Take it to Napa and have it tested. Takes them 5 minutes or you can purchaser a tester and check.

@powerfulimprovements

Ай бұрын

Local Napa can’t do anything 24v. Been to every shop in town

I only have 7gpm Remco for roofs. 3/4 vallves & lines to 5/8 hose. Gets the job done but want upgrade to something else w out going to gas. Watching your videos to see new X6 set up.

@Hurricaneharry518

Ай бұрын

I put on a p40 a few weeks ago. My new best friend!

Joe also you can get the step up converters when ubhave time lol

👊🏻

@powerfulimprovements

Ай бұрын

@@AllAboutPressureWashing 💪🏼💪🏼

I am totally amazed that the water boss gun is working with the 12 V pump. I tried doing it on my system 12 V 7 gallon per minute pump and it did not spray but 10 feet I’m using half inch hose. I wonder if a 5/8 hose would increase the volume and pressure. Do you know what size nozzle is inside that gun?

@powerfulimprovements

Ай бұрын

@@benderprofessionalservices9018 I think it has a lot to do with the 3/4 manifold and 5/8 hose combo

@benderprofessionalservices9018

Ай бұрын

@@powerfulimprovements yeah I think the five eights is definitely the game changer because I have three-quarter inch hose going in and out of my pump and like I said, I couldn’t get it to work

Proper form Joe 💪. I’ve been washing a ton of mossy roofs in MA, I’m curious what kind of timeline you set expectations with your clients for it to come down after treatment on average for a roof similar to this one?

@powerfulimprovements

Ай бұрын

I tell them at least a couple seasons and up to 1 year

@ryanghent7604

Ай бұрын

@@powerfulimprovements you’re the man. Thanks, Joe!

Well you got some problems Joe. But st leadt you have the ware with all to keep going. There is nothing better than being busy.

@powerfulimprovements

Ай бұрын

True

Hey Joe, I recently got a K7 unloader for my 8gpm. I had a problem with the 3/8 bypass line blowing after a week of use. I initially tried a 1/2 bypass line but ran into the surging problem. Any insights on where to go from here?

@powerfulimprovements

Ай бұрын

Are you using a decent 3/8 braided hose. I’ve blown several also. I use a 10 footer

@michaellitteral

Ай бұрын

@@powerfulimprovements it was a reinforced tubing from Rural King. I was using about 14 feet

Shocked that x6 lived through 2 years of JD abuse. Says allot for how stout that pump really is.

@powerfulimprovements

Ай бұрын

Truly

Do you advertise anywhere? If so, where and how?

@powerfulimprovements

Ай бұрын

Almost none these days. 80% past clients and referrals

Pump in the mail....i love how joe doesnt complain and just gets things done! These are all tools to make money...bleach eventually wins and its an expense to income ratio.

@powerfulimprovements

Ай бұрын

You are the man Jimmy

@VancesPressureWashing

Ай бұрын

Also nice that its mostly the bolt and not the actual pump? Not much you can do about hardware vs bleach 😂

@TheIvies04

Ай бұрын

Hey Jimmy, your site for a while now says your not accepting orders...? How can I place an order bud? Thanks

@freedompowerwashingllc6199

Ай бұрын

@@TheIvies04 i got sick for awhile and that put me in a tailspin...i am pretty much for the most part caught up...i have some vacation coming up and need to just take a break for a bit for some mental healing...i apologize that i dont have anything better for you than that...my goals are to pick up again around september...i will also be transitioning my communication lines to email only one thing that has been a killer for me is the phone ringing non stop...and majority of it is someone who "has a question"

Been there a few times with my truck

@powerfulimprovements

Ай бұрын

I’m sure

Joe take a charged battery and hook jumper cables from it to the battery that you run down. hook battery charger to charged battery. It will charge it unless battery is bad. Ive had to do this with a bunch of batteries. Especially optima batteries.

@powerfulimprovements

Ай бұрын

24 volt?

@mattlane7081

Ай бұрын

@powerfulimprovements have not tried that on 24 volt. Thought you were running a 12 volt battery sorry

What do you do in the winter to not die of Bordom

@powerfulimprovements

Ай бұрын

We barely had one this past year but normally I rebuild equipment and prep my processes.

I just found out if you go to Harbor Freight Tools and you get the 1 inch gas pump that they're selling that you use to pump out basements I found out that you can actually use that as a soft washing machine and it sprays like 9 gallons a minute

@powerfulimprovements

Ай бұрын

I saw that too. I know a local guy been using one for years batch mixing

@TheDbell

Ай бұрын

Which pump?

@SqueegeeCleanSteve

Ай бұрын

@@TheDbell that will be the one inch pump that they sell at Harbor Freight if you get all the materials to hook it up through the 1 inch line you can actually use it as a soft washing system

@brianaird2193

Ай бұрын

I saw that too and thought of that a few years ago and just hadn’t tried it, wish I had back then; could have given a long time review, lol. I like the idea of if you are on a big job and you have a pump failure and want to finish, just run and grab one for a couple hundred bucks and swap it in.

Jump start the battery from your truck for a few. Then put it on the charger.

@powerfulimprovements

Ай бұрын

12 volt won’t do anything to 24 v

You might have to connect the dead battery to a good one so it will take a charge with the charger you have.

Have you considered Leon John’s new soft wash system as a backup?

@powerfulimprovements

Ай бұрын

Yes. My friend Todd just bought one

@samsonitepaintingmorellc7383

Ай бұрын

@@powerfulimprovements Seems like a really solid soft washing system.

@powerfulimprovements

Ай бұрын

@@samsonitepaintingmorellc7383 it looks like it.

@vulcanpressurewashing

Ай бұрын

I saw a video of it on Pandhandle power washing channel. He said it can shoot over 80ft. Do you have a link for it?

@powerfulimprovements

Ай бұрын

@@vulcanpressurewashing I do not

This is why 24v pumps suck. You look at everything on your rig. It’s all 12 V power and can be charged with alternators either off of your truck or your pressure washers and you never have to plug anything in and everything works the same and charges the same. It’s all 12 V power. You throw a 24 V on your rig and you have to buy a different charging system. You have to plug it in and you can’t charge while you’re running and you can’t just run your whole system off of two heavy duty deep cycle Marines so then you have to find space for another battery. Remco‘s new pump is also a 24 V and as soon as they said that I know it would be a flop. It’s just not practical it doesn’t match anything else we run that’s poor planning by the manufacturers in my opinion.

@powerfulimprovements

Ай бұрын

Can’t disagree

Definitely not getting in a pissing contest with you if you can pee further than that lol!

@powerfulimprovements

Ай бұрын

@@joshuahagan9739 I’d agree 😂😂😂

3 seasons on my delavan 7gpm pump😂

@powerfulimprovements

Ай бұрын

Wow

Can’t auto zone charge it?

@powerfulimprovements

Ай бұрын

Nope. Local doesn’t have 24

there a very inexpensive way to run the super pump with the current set up you have and no additional batteries. PM me if you need help setting it up.

@powerfulimprovements

Ай бұрын

Series?

Just goes to show that being a high rolling pressure washer that you need back up systems for everything as chit just plain breaks!

@powerfulimprovements

Ай бұрын

Yep. Need redundant systems

12v FTW.... it just works...

@powerfulimprovements

Ай бұрын

Right

Sounds like you’re ready to step up to an Air Diaphragm system. Talk to Lori Smith.

@powerfulimprovements

Ай бұрын

Not in the cards this year

Still here

@honestabe9103

Ай бұрын

We all want ur X6

Do you know what insurance company was giving them a hard time? I do a good amount of roofs for nationwide customers and they usually don't pass it if there is still moss on the roof.

Called an audible. Nothing stops Joe getting the job done!

@powerfulimprovements

Ай бұрын

💪🏼💪🏼

🫡

@powerfulimprovements

Ай бұрын

👊🏼👊🏼