Thanks for the helpful video! Got my GTV running on stock LEDs with your WLED VESC controller and power supply.

Finally someone made a lights tutorial for VESC. Let me know if you would be interested in selling a PCB like that preassembled. I would (and likely many others) purchase in a heartbeat.

@ericugland7990

Жыл бұрын

There’s a link in the description to buy the pcb!

Awesome video 👍 its about time someone made a tutorial for this!

Fantastic. I’ll definitely order a couple of these.

you have so nice 3d printer, that print uniformity is good.

@ericugland7990

Жыл бұрын

bambu x1c

Clean!!

coool 😎 I want em!

When I add lights to my setups I want them to look like the other onewheel lights, iconic and recognisable from a distance

@ericugland7990

7 ай бұрын

My presets default to white headlight and red tailight, but its more fun to have options!

@redboyjan

7 ай бұрын

@@ericugland7990 for sure! I have Electrolytes. I just like the onewheel lights look the most!

Lemme know when you want to have auto switching lights and a idle option for light show. My vesc will switch the front and rear depending of your direction your going. . Good luck you have just begun.

would be awesome if you could get red flashing from one side to the other like knight 2000 with david hasselhof

@ericugland7990

10 ай бұрын

Would be pretty easy to make an animation for that! Presets are easy to build in wled.

Roughly what is the wait time for the VESC WLED CONTROLLER (backorder)?

Great Video! Is there a way to use your controller and LED solution with a Splinted UBOX 100? Thanks, Andy

@ericugland7990

10 ай бұрын

working on a different version for ubox in the future. It's much simpler to set up on ubox, even without this controller. There is no need for the buck converter or relay.

I’m getting a vesc XR with 20s2p in stock battery box. do you think I’ll have enough space to add that wiring to the battery box or do I need a torque box?

@ericugland7990

10 ай бұрын

20s fits in stock xr box, that's what is in my personal board.

I was sooo excited to get mine set up, i got everything plugged in and the rear light worked but not the front. I went to check the front led strip with my multimeter and... *pop* 😢 I fried the whole PCB. Got another one ordered but was wondering if I could send you the old one for diagnosis. Thanks man.

@ericugland7990

9 ай бұрын

email me via the website, we will get you sorted. You likely just blew the fuse.

@nathanofearthh

9 ай бұрын

@@ericugland7990 ok sweet! I'll email you.

Could you add another port onto it for lights on the footpad?

Where can we purchase the heat sink housing for the LilFOCer like the one used in your Floatboxx build for your client?

@ericugland7990

9 ай бұрын

It is not a heat sink, thats just a plastic cover. Surfdado posted it on thingiverse.

Will the LED strip holder have enough space for the waterproof version of the SK6812 strips?

@ericugland7990

5 ай бұрын

no its for the bare strips. Either make the window and silicone the ends, cover the whole thing in epoxy, or just remix the file for the size of strips you want to use.

Ordered. What momentary switch did you use for quick changes?

@ericugland7990

10 ай бұрын

www.aliexpress.us/item/3256801900884791.html?spm=a2g0o.order_list.order_list_main.73.4ddb1802hhbs41&gatewayAdapt=glo2usa

Øh yüs brøthër

If you have an RGB power button how would you add it into this? ?

@ericugland7990

7 ай бұрын

It's possible to solder an additional output onto the controller, but if you wait a bit I will be releasing an updated one with an AUX output for a 3rd led segment. Could be used for a button, or for halo pads, etc.

Do the LEDs change colors to coordinate with going foward and backward?

@ericugland7990

9 ай бұрын

no, not with this setup.

Probably a dumb question/assumption. But the physical button could be optional right?

@ericugland7990

Жыл бұрын

Yes it’s totally optional. I mostly wanted a quick way to disable the lights, and later discovered how to set up the additional functions in wled

I can't find that individual strip Waterproof - you have a link by chance ?

@ericugland7990

9 ай бұрын

I am not using waterproof strips, waterproofing is handled by the enclosure.

Can you shut off the lights complety with the app?

@ericugland7990

8 ай бұрын

yes

Is there a link to order one of those controllers?

@ericugland7990

10 ай бұрын

check the video description

Does the button need to be a certain voltage?

@ericugland7990

9 ай бұрын

no, only 3.3v runs on that port. Any momentary button will work.

Why not add a can bus chip?

@ericugland7990

10 ай бұрын

wled does not have canbus compatibility.