Excellent video's. This channel is the best. No nonsense and just explains everything so clearly. I am after learning so much already

This is brilliant - I've been looking for a simple explanation like this for ages!!!! Clear explanation of 1, 2 and 3 way switching and a look at how the switches actually work. 10/10.

Clearest explanation I’ve ever heard. Brilliant as always. Thank you John.

I really appreciate the time you put into the videos and for sharing your knowledge of all things electrical with us.

@juliusangachi4793

2 жыл бұрын

Thank you so much for your explanation that made sense to me on how the intermediate switch looks like from the inside Also explanations on between the DP and intermediate switches

Brilliant. So much more information than just 'this is how to wire it'. Clear diagrams and explanation made it easy to understand. Thank you.

I tune in as much for your dry sense of humour as I do for the educational value. Love it :-)

Complex arrangement... had one of them this last week. 5 storey building, customer wanted each landing to be switchable from that level, above, and below... so the 3 intermediate landings ended up with 3 gang switches (below/here/above)... the bottom and top ended up with 2 gang switches... (here/above, or here/below, depending). Had to use grid switches (to US viewers, the grid arrangement is similar to how you guys do it, the switch modules are separate from the cover plate, you can mix and match). Fairly 'bread and butter' electrical work, but when the customer comes in halfway thru the job and sees dozens of wires at one switch position, then comes back an hour later and it's all working as designed, you get kudos :)

Life saver John! I just opened the switch mechanism and all internals fell out; it all looked a complete mystery until coming across this video after a long frustrating search.

This is a great tutorial and it has just been a lightbulb moment for me, I've tried to understand how 2 way switches work for a while, thank you.

This guy is brilliant at explaining

You Channel is a life saver!. Thank you for explaining what I have always thought of as Black Magic. I can now understand how 2 way switching works and can use it in my van build. Excellent Video

Well explained John, now I'll be able to fit a few of them in my garage and garden shed this weekend. thank you,

I concur with similar comments. Appreciate your time and effort, very generous.

You are a very good teacher, John. Keep it up.

Thanks John for a thorough explanation, excellent work.

Thank you another clear and consice explanation of an item we all use in one form or another.

Nice explanation. And loved the LN connection "There's a huge explosion and the word comes to an end" :D

Thank-you JohnWard for your videos they are more than educative.I am really great full for your work.

thank you so much JW, that was incredibly helpful for my first year course :) really appreciate the thoroughness and detail that went into your explanation!

Wonderful lecture!!!thank you very much

Thanks JW - very well illustrated and explained.👍

Thank you. You have just helped me out with my understanding of these issues!

Wow! You broke it down so simply. Thanks alot.

Thank you for making it easy to understand these switches

Clearly explained as usual..Thank you for the time and effort you put into your videos.

Absolutely fantastic explanation. Thank you very much.

Another great video john

Hey John. Love your stuff. Could you do a video for a two gang switch. One switch to middle light ceiling rose, the other switch for 3 wall lights?

Great explanation JW. I'll be sending this to my apprentices to give them an understanding of the different types.

@cr03ks

6 жыл бұрын

Dans the Engineer lol I'm an electrician and this still confuses me it's because I've probably wired 1 or 2 in my life, I think it's because of the 3 cores, I do normally commercial and singles if wired differently

@DanstheEngineer

6 жыл бұрын

adam c when I was a 1st year apprentice I drew different wiring methods of two way and intermediate switching and stuck my drawing by my bed.... sounds sad ha but I learnt it very easily after seeing regularly the different ways.

Excellent J.W. Thanks again. Very Good.

Great, just what I needed to know. Thanks.

Thank you! learned just what i needed for a diy repair today

Good luck trying to reassemble those switches. Great video.

Nicely explained. Thank you

Brilliant information, thank you 🙏

Thanks. your video helped me replace my kitchen light switch and sort out the switch that was switching the wrong way :)

Such a clever way of doing it. I always got confused about switches now I understand.

@cr03ks

6 жыл бұрын

Knuckles the Echidna I'm an electrician and an intermediate switch always confuses me lol its because we rarely wire them

Having just wired up my new kitchen with 3 switches of 4g each controlling 4 circuits I could have done with this vid before. Still, it all works and the wife loves it. The switches, I mean.

Great explanation John and very clear. There is more than one way(excuse the pun) to cable two way and intermediate switching - a follow up showing the practical ways to do this would be useful.

@jwflame

6 жыл бұрын

Lighting circuits covered in these videos: kzread.info/dash/bejne/lqKkuJlxYcacg9o.html kzread.info/dash/bejne/foR-wdB-Ya2noco.html

This helped me understand an intermediate switch... Thanks!

Thanks fella, very good video and explanation 😎👍

Excellent work Sir. thanks

JW makes the best videos ever. I've seen almost all of them. How about the 2 way dimmer switch? Please make a video

Thank you John

Excellent video

I learned something. Thank you.

Really helpful thanks @Johnward

Awesome I always wanted to see the inner workings of an intermediate.

Thanks for the info, appreciate it. Question : Can a single pole switch and a two way switch be connected on the same circuit breaker?

Another excellent video John. Have you any plans to do one on DALI lighting?

I've actually ordered 3 way power outdoor connector so can just connect power outside all to connector and use switch in house when needed

It might be a sample question for pros, while it took me a half day to figure out how it works. It is a double pole switch. Thank you so much. Your Video is absolutely useful. There are 3 lights in one single switch. Probably there are too many wires, they use a single switch with 4 terminals, extra link wire on the top, which confuse me. It is a double pole switch.....Great video!

Thanks John

very useful video

Thanks to give explanation

great stuff...

It looks like the two way switch can toggle between two lights. If the L1 and L2 of various two way switches are wired directly to various light bulbs, it would make for an interesting candid camera clip watching someone trying to try turning on (or off) all the lights of a large room. E.g. flicking any switch would cause a few bulbs on its L1 to go out and a few other bulbs on L2 to light up.

Thank you so much. Was confused because mine had 3 holes and i didnt know if i coukd use it for my switch that has just 2 wires coming out. . So when i put the wires from the wall into the new switch socket, can they go into any hole or is it spacific which wire goes in which holes

Your last comment about double pole just gave me an aha moment. I realised what I was trying to replace was a double pole switch not a 1 way, or intermediate. It is for a bathroom light, do you have a video about these?

hello John can you please tell me how much volts and Amperes do i need to run an smart drive motor to 5000 rpm without burning the motor or it's possible to do that at all?

Thankyou, thankyou , thankyou.

hi John I have an outdoor power switch its one or 2 way.i just want to wire my hot tub with rcd adapter to switch and there is already power coming out house from dishwasher fused connector which we don't have dishwasher.i used caravan plug on outside wall for my camper van charging .so its 3 mains wires I want connect to switch .is it same as your light switch here in 1 or 2way .steve

John, thanks for the video - how many folk know what the inside of these switches actually look like? Can you confirm that in a 2-way switching arrangement you can have as many intermediate switches as you want.

@jwflame

6 жыл бұрын

Yes, just add the extra intermediates in the same way as the first one. Can have as many as you want.

Why would I have two extra wires on the "out" side of a two way switch? It's at the "supply" rather than "lamp" end of a two way arrangement - there are two wires to the other switch, of course, but also two other wires connected with them. Unless they are somehow meant to be part of the supply/switching arrangement for a fan - this is in my kitchen - I can't think what they'd be for. This came to light after I replaced the "lamp" end switch - there was a flashover occurring in or at the terminal end of the switch that was causing the light to flash whenever it was supposed to be off. I am intending to get a smart (Zigbee) switch module fitted - likely in the loft unless there's a way to do it at a switch without undoing the two way arrangement - but am now wondering how these extra wires might be affected.

I have an Argo 2 switches gang switch it has 4 screws they are labeld COM...L1..L2 all horizontal... but dont show any screw for NEUTRAL...how can i connect it to control my 2 light bulbs???

Hi John. At 9:27 there is brown on the plastic piece of the switch. Is this grease or is it burn marks? I liked the video insertion at 3:07, it took me a little by surprise while I was eating my breakfast. Thank you for doing a video on light switches, I've recently changed a number of light switches in my house, and was going to offer you the crunchiest of them.

@jwflame

6 жыл бұрын

Grease, the switch is a new one, never used.

nice glasses john

Nice teardown of UK light switches, thanks. It would have been nice if you had included a chart showing the differing terminology used. i.e. when ordering you would look for a 1 gang 1 way, 1 gang 2 way or a 1 gang intermediate. And double gang 1 way, double gang 2 way, etc. Gang meaning the rocker switch bit. In the electronics world they are described different again i.e. double pole single throw (DPST) = 1gang 1 way.

@jwflame

6 жыл бұрын

More info on the website : www.flameport.com/electric/lighting_circuits/index.cs4

Nice

I found it really difficult to find a 2g wide 4 x intermediate switch. I had to make it up using grid switching.

It's been very difficult to find a video on 2 gang 2 way lighting. A hallway light and landing light. Switch for hallway has 2 switches and switch for landing light has also 2 switches. This enables you to turn the upstairs landing light on from the downstairs switch and vicer versa. Any chance of a wiring diagram or video. Thanks

@jwflame

4 жыл бұрын

kzread.info/dash/bejne/foR-wdB-Ya2noco.html

I’ve been look for a video that explains the difference but was still wonder if it was possible to use a two way switch as a one way as the brand that I’m looking to buy seems to not make 1 way also I found that my bathroom light switch has an extra wire so I don’t know what switch to use

@jwflame

3 жыл бұрын

Yes, a 2 way can be used as 1 way, and intermediates can be used as 2 way or 1 way.

The world comes to an end. Ha! Ha! Love it! Absolutely brilliant!

hi john hope you and family all well.i have 3 terminal switch and want connect to lights 240volts from my consumer unit I've fitted in shed.ive got get consumer unit metal with mains switch and 2 rcbo,s 6amp for lights and 32amp for sockets.ive got light direct to rcbo at moment but want wire switch in using light cable in uk.my switch has common terminal at bottom and 2 terminals at top.so not sure how wires go from consumer to switch to light.steve

@jwflame

3 жыл бұрын

Lighting circuits are covered in detail here: www.flameport.com/electric/lighting_circuits/index.cs4 and for a single light this is the usual method: www.flameport.com/electric/lighting_circuits/connect_at_switch_for_garage_or_loft.cs4

@stevemcgowan3017

3 жыл бұрын

@@jwflame thanks John

Hello John can you help me with this switch ive come across in a new build....... its a two way switch in a livingroom. One side its a standard two way switch as you have indicated however the other is what seems to be an intermediate. its marked on one end...... loop and 2way and on the other ......common and 1way . Theres three wires in the loop, 2 wires in the 2way, one in the common, and two in the 1way. How does this work ...it looks as if its powering the downstairs loo as well which is on a single 1way I want to replace with metal light switch but cannot find a metal 4 connector switch (intermediate) they are all plastic. Can you advise ...can I wire this up on a normal 2way switch ...or am I stuck with the plastic switch plates.Thanks...ps your vids are brill by the way

@jwflame

5 жыл бұрын

The loop terminal is an additional one that some switches have to connect the neutrals together. Any normal 2 way switch can be used as a replacement, with a separate terminal block for the wires currently in the loop terminal. It is NOT an intermediate switch.

Hi John, how do you wire the Linear Halogen Lamps 118mm 230V 230W? Does it have polarity? Thank you.

@jwflame

5 жыл бұрын

L to one end and N to the other, polarity doesn't matter.

@imonw3b

5 жыл бұрын

John Ward Thank you.

Is it possible to make a double pole switch from a intermediate switch? 🤔

@jwflame

3 жыл бұрын

Yes, just use 3 of the terminals, 4th one is not connected. An intermediate can also be used as a 1 way switch if needed.

I rewired mine so I could turn the light on and off using a radio remote. It involves an impulse relay. My light switch is now a button.

so I just connect the neutrals together and earths together then use live through the switch I guess

And the lord (Ward) said, let there be light. Intermediate theory always puzzled me .... till now = Happy Days

Does anyone sell just the pivoting contact for a one-way switch I wonder? I keep repairing it with new solder to beef up the point of contact, but of course the arcing soon wears it out. But a new whole switch? No no no..

You're an interesting no-nonsense guy .

Who’s in the urn?

What is the name of the two switch wires L1 and L2 in the UK? Travelers?

@jwflame

2 жыл бұрын

Strappers usually.

i'm trying to find 1 x intermediate and 1x 2 way in 2 gang switch . Only modular are available

@jwflame

5 жыл бұрын

Use a double intermediate - intermediates can also be used as 2 way or 1 way.

@DerekHundik

5 жыл бұрын

yes you right ,but that double the costs and 2 gang intermediates are not easy to find either. What I'm going to do is buy 2 gang Schneider switches and take out 2 way switch and replace with intermediate. Those look identical.

+John Ward Whats' with the shiney new-looking chair with red-stripe around it? Does this make videos process faster and fiddly-tasks magically get completed more easily?. Or, is this part of a subconscious scheme to join a revolution to return to Red Yellow Blue Black fixed-wiring-colours post-brexit ;-). [In all seriousness IET have declared their membership of CENELEC is independent of EU-membership.].

@jwflame

6 жыл бұрын

The dull explanation is that the old chair broke, and a new one was required quickly. Other colours were fluorescent green or white. Red seemed like the marginally better choice.

@sbusweb6344

6 жыл бұрын

Reminds me of deliberations over replacement laces for running-shoes. Pleased you like my comment =).

Interesting. What in the UK is called a two way switch is called a three way switch in Canada. An intermediate switch is called a four way switch. Darned if I know what we call a one way switch.

Job

In the US they call them single pull, 3-way and 4-way switches.

@CutLeRoc

6 жыл бұрын

Nobody cares about the US

@twn5858

6 жыл бұрын

Yep, it's a hell hole police state.

@TheChipmunk2008

6 жыл бұрын

Thanks for the info... it's interesting to know the terminology. The 3 and 4 way are 'the number of terminals' i believe... wonder why the single pole single throw (UK 1-way) didn't get called '2 way' in the US?

@paulfaulkner6299

6 жыл бұрын

Are you an Umpalumpa too?

My grandparents house was only fitted with intermediate switches everywhere...

@cr03ks

6 жыл бұрын

Dennis Lubert in the electrical trade domestic this is has hard has it gets if you can understand this then the rest is easy

❤👍🇬🇧😁

Instructions unclear. Installed intermediate switch with two lines in. Can't turn light off.

@devttyUSB0

4 жыл бұрын

I bet you came here through thomas nagy's video too ;)

N

😂

In the US we do things much.... In the US... In the US... In the US... Blah Blah

...and of course there's a huge explosion and the world comes to an end. Hilarious!

SWjob