That square body crew cab though, I love the old crew cabs

Mickey Thompson classic wheels come in your size! The lug pattern on your truck is 8x6.5 and 16"+ wheels fit. The correct part number for the wheels in black in the 16x8 -12backspace which will give you the most clearance for a 35x12.5 is #2468482.... toyo makes the MT in 35x12.5 or 315/75R16 is the metric equivalent.

@HotBakedZiti

5 жыл бұрын

@Peter If he didn't mount them he could return them.... Another thing is the load rating on 16" wheels is a lot higher than on 17's. All 35's on a 17 i've seen are D load range. Since this is a work truck this is important to have E or F load range tires.

Had me rolling when you said the tool trucks are the modern day drug dealers 🤣🤣🤣 So very true

I’m honestly more excited about this build than the BBB. And I’m die hard Bowtie

@DMAXRYNO

5 жыл бұрын

It's been a long time coming!

Love the old square bodys on Fords, it's a beautiful thing of the past.

I can't wait for the BUILD to Be Done!

Yess!! lol so glad you kept it simple on the wheel and tire set up. I had the same exact truck and I love seeing them done right. I know the duramax is like 100k truck but I’d honestly pick the litter obs like any day lol

16x10 with a 315/75/16 e rated mud terrian, that's what I run on my F350

@tunercult2687

5 жыл бұрын

Srw or Drw

So can you post a parts list. Looking at doing this for my 2wd dually tow rig so I can fit semi tires lol

I like how you have a vid in the shop man, you should do more of these!

I looked for a decent 4x like that finally just bought a straight axle,leafs,spring mounts and tcase.that's what I'd do.

You can run super duty front brake hoses. They are 4” longer than stock that’s what my 97 CCSB F250HD has

@mariovazquez2450

4 жыл бұрын

Where do I get a lift kit for a 97 F-250 hd 2wd diesel

Finally the video I've been waiting for!😁

Finally!! Been following you for two years and hoping to see this the entire time 👍🤘

@DMAXRYNO

5 жыл бұрын

👍🏽👍🏽👍🏽

You can run 15x10 8 lug wheels on a f350 obs ford all you have to to grind the tops of the brake calipers and run a wheel spacer to make it fit

I’m running 16x12 Classic Baja Locks on Toyo Open Country MT LT385/70R16 on my 94 F350. Toyo makes 13 sizes for 16in rims in the Open Country MT. Rides great with big tire and small rim. There’s about 1/4 in clearance btwn the caliper and the inside of the wheel.

I love the look of the new lanyards

@DMAXRYNO

5 жыл бұрын

hopeandbranden thanks!

Love the channel man, passin time at work ole son!

@DMAXRYNO

5 жыл бұрын

Appreciate it!

HELL YEAHHHH 7.3 gang ,been waiting on this video !

Ryan you can run spacers and run the 15” wheel

@Volcomej1

5 жыл бұрын

Yeah but its a work truck and spacers aren’t all that dependable in my opinion

Same setup for all 70’s + bronco & F-series with IFS front suspension

i ended up putting the pro comp 15's and 35's on my half ton obs about a year ago

@Commodore64k

4 жыл бұрын

2wd? Did you have to do any trimming on the front bumper?

That was the best wheel tire combo possible

I love how in the shop there jamming out to smells like teen spirit💪🏾🤣rip kurt kobain

@adamdearmon2395

5 жыл бұрын

I was thinking the same thing.

get 315/75/R16 tires, they are basically 35s on 16s, have good width too. don’t forget about the metric tires.

@vndrgrf2447

5 жыл бұрын

cancel that lmao

Love a good 4-door OBS.

I run 35s on 16 inch rims on my super duty, looks good and everyone makes tires for it

What lift kit did you go with and do u think you will have any problems getting it aligned and such?

Niiiice! Too bad that thing isn’t 4wd man. Can’t wait till you get one and can’t wait to see the build🤘🏻🔥💯

@NoHalfAss

5 жыл бұрын

I’ve been building my 7.3 for awhile and I already know you’re gonna put mine to shame QUICK!😂😂😂

@NoHalfAss

5 жыл бұрын

Edgar Perez haha good point. I just like talking about builds. Other people comment sometimes and I learn new things from them and stuff like that. But I get what you’re saying👍🏻 but I am also trying to get my name out there not gonna lie. I like being part of the community. It’s fun

@NoHalfAss

5 жыл бұрын

Edgar Perez thanks man appreciate that🤘🏻

Love your vids

Brought back memories from when I lifted my 2wd obs back in the day

Finally some content I’d like to watch

If you want an old 7.3 look around southern Mississippi, my dad and I flip trucks and cars on the side and we see a bunch of those go through auction and on Craigslist.

Mickey Thompson classic baja lock wheels I have 17x9 on my truck and I love them paired with 295/70-17 Mickey Thompson Baja mtz p3 tires

Ryno does it again! Wasn’t expecting this

Ryan if its not too far outta your way theres plenty of them out here in az

About time let’s go!!!

I havent even watch the video and i already hit that like button cause i know its gonna look great

I thought Mickey Thompson had a 16x10 8 lug in the classic wheel. Not sure anymore. Always been a fan of the old school small but wide wheel look.

Hell yea!

Zach @2:14 looking for a front driveline like, “wtf does Ryan want to lift this for?” Full size pre-runner is like lipstick on a man, brah, that’s Cali fluff.

This is a long shot to if you see this since this is an old video.... We are working on a f350 Daully and it is also two wheel drive .... We are about to buy the Skyjacker lift kit but was wondering what kit did you go with and did you have to put a new camber kit on to get the right Alignment???? Thanks

I daily a bronco on 40 inch swampers with 15s and it’s not annoying

Any info on what lift kit u got ?

I love the outro.

I got 16s with 35s on mine. Heaps of tire companies make a 35 for 16s. It’s 37 up that you step up to a 17” rim.

Preciate you ridin Michelin’s on the stocks 😂 ... I can keep my job just a lil longer 😂👍🏽

Hey mane where did u buy your drop bracket kit at??

where did your bud open up shot at? I need my 95 f250 2WD leveling kit in front.

Hey how about that kit that you used

You can get Nitto Trail Grapplers in 315x75R16

I have a 95 F250 diesel 2WD, just need to raise/level the front 2-3 inches. what hardware did you use on the front?

Toyo open country at 2 make a 315/75r 16 same as a 35x12.5x16

“Hat emergency” 🤣 been there.

@DMAXRYNO

5 жыл бұрын

The struggle is real!

I can't believe it's been 3 years since ryno bought this, I remember when he did

Cool video

Where did you purchase the lift kit from

Ohhhhhh shit finally congratulations

Where did you find the brake line?!?!?

What lift kit was this?? I need to lift my 2wd

Yeah your intros are loud pretty funny though and I love my 16 inch wheels more rubber the better but I don’t have a show truck I use my truck in some pretty crappy conditions and the mountains good videos brother keep it up work and work hard for it yes sir

Hey man I like in Amarillo Texas and I just passed a 2015 GMC with the work for it sticker on the back glass and it is cool as shit I have to get my self one

@tunercult2687

5 жыл бұрын

Live*

@DMAXRYNO

5 жыл бұрын

Tunercult 2 that’s awesome!

Where can i get the same lift kit for my f250 1996 7.3l 2wd extended cab ?

Buy the Mickey thompson atz p3s. They make them for 16 inch rims. My buddies dmax has 16x12 mickeys with those tires and they have 50,000 miles on them

What up with your beef and procomp

🔥🔥

I would like to see 20x12 or 22x12 on the OBS Ford

What kind of double din is in the 7.3

Keep the stock wheels with 35s I saw an obs like that and it looked good

@DMAXRYNO

5 жыл бұрын

Definitely thought about it, but mine need to be stripped, polished and re-cleared

What springs did you use?

American force wheels?

What lift you use

Finally good content again 🤭

9:43 lil ryno beard growing...lol

What lift did u get

Lol I got a 17” on 35” pro comp alloys just like the tire you’ve been talking about. wasn’t my choice I bought it #boughtnotbuilt

I'm looking for a rig like the obs

Whats wrong with procomp? just wandering because might be the lift imma get for my 2wd avalanche

@RideFishHunt

5 жыл бұрын

Nothing wrong with procomp at all. They make great products.

What is the lift

You can buy the wheels you wanted in black and a 16x12

Actually a funny video finally lol 👍👍

Want the old school look get some 70’s highboy 16.5 inch wheels I have a set on my 95 still get tires for them 45 min from my house here in WI

TRY FIND SOME WELD WHEELS AND IF U REALLY WANT TO PUT 15S U CAN JUST PUT A WHEEL SPACER AND THEY WILL FIT

Get some Maxxis RAZR MT’s they have 315/75r16/34.8x12.8

What brand of lift

Sweettttt

What size lift is that

Mickey Thomson makes 8 lug 16 in the classic 3

You have the money to convert it to a 4x4 it’s not hard, And btw it’s the same with OBS Chevys you can’t run a 15xanything BUT it will clear if you put a spacer on , I had 15x14 on 37’s and they cleared with a spacer it’s a cheap fix to get the look you want

Do some 16in machined methods with 305/75/16 Toyo AT's

Yaaaaassss!!!! I can’t wait to see the finished product!

I think its time to get a 4x4 k5 chevy blazer and lift it with 35’s paint it with a deep blue, or a red/orange.

Nice Ford, 7.3 all the way!

FINALLY

The dealer in my neighborhood has Rat Fink painted on the back of it lol

@DMAXRYNO

5 жыл бұрын

Hahaha

Tell zack he should get an Astro air hammer those are a mean air hammer better than snap on

Will the x large work for sticker fit on the back window of a Tacoma

@DMAXRYNO

5 жыл бұрын

They're about 47" wide

Can you re paint your truck looks like it needs it

Where did you get the 2 drive life kit from? I’ve got a 95 F 350 2 wheel drive as well

@andrewharrison8177

2 жыл бұрын

wondering the same

@jamesbroderick3660

2 жыл бұрын

@@andrewharrison8177 rough county aka jet jacket has theny

There’s some rims called “classic ssbr” that would be sick on this type of truck but they don’t fit with a 6” lift. Or else those would’ve been perfect this.