Section 1: Refer to your manual Section 2 02:13 | Step 2.1 02:19 | Step 2.2 03:00 | Step 2.3 03:06 | Step 2.4 03:40 | Step 2.5 03:46 | Step 2.6 Section 3 05:14 | Step 3.1 05:24 | Step 3.2 05:39 | Step 3.3 05:45 | Step 3.4 06:06 | Step 3.5 06:22 | Step 3.6 06:31 | Step 3.7 06:45 | Step 3.8 06:52 | Step 3.9 07:22 | Step 3.10 07:48 | Step 3.11 08:00 | Step 3.12 08:10 | Step 3.13 08:32 | Step 3.14 Section 4 09:00 | Step 4.1 09:32 | Step 4.2 09:45 | Step 4.3 10:02 | Step 4.4 10:23 | Step 4.5 11:06 | Step 4.6 11:11 | Step 4.7 11:26 | Step 4.8 11:39 | Step 4.9 12:21 | Step 4.10 12:41 | Step 4.11 Section 5 13:02 | Step 5.1 13:15 | Step 5.2 13:32 | Step 5.3 14:17 | Step 5.4 14:22 | Step 5.5 14:45 | Step 5.6 15:04 | Step 5.7 15:33 | Step 5.8 15:45 | Step 5.9 Section 6 16:06 | Step 6.1 16:19 | Step 6.2 16:30 | Step 6.3 16:48 | Step 6.4 Section 7 17:34 | Step 7.1 18:36 | Step 7.2 18:46 | Step 7.3 19:02 | Step 7.4 19:23 | Step 7.5 19:52 | Step 7.6 20:03 | Step 7.7 20:12 | Step 7.8 20:21 | Step 7.9 20:43 | Step 7.10 21:04 | Step 7.11 21:33 | Step 7.12 22:01 | Step 7.13 22:23 | Step 7.14 22:51 | Step 7.15 Section 8 23:26 | Step 8.1 23:42 | Step 8.2 23:58 | Step 8.3 Section 9 24:27 | Step 9.1 24:54 | Step 9.2 25:19 | Step 9.3 25:41 | Step 9.4 25:54 | Step 9.5 Section 10 26:12 | Step 10.1 26:29 | Step 10.2 26:34 | Step 10.3 26:48 | Step 10.4 27:06 | Step 10.5 27:20 | Step 10.6 27:54 | Step 10.7 28:55 | Step 10.8 29:29 | Step 10.9 30:12 | Step 10.10 31:32 | Step 10.11 Section 11 32:26 | Step 11.1 Section 12 32:44 | Step 12.1 32:53 | Step 12.2 33:07 | Step 12.3 33:13 | Step 12.4 Section 13: kzread.info/dash/bejne/g2mKra6wo8nIZaQ.html Section 14: Refer to your manual.

@terrancesullivan5894

Жыл бұрын

P0c

@karenkushi8475

Жыл бұрын

Okay

@RamonFierro-my8fi

2 ай бұрын

​@@terrancesullivan58940:06 ❤

@RamonFierro-my8fi

2 ай бұрын

0:06

@RamonFierro-my8fi

2 ай бұрын

0:06

They are right about the lifetime shed it takes a lifetime to put it together

@gabrielrodriguez8727

Ай бұрын

Skill issue

This video is literally the only way to properly build this product. The manual is nearly worthless. Great video. Made the process so much faster.

@carterstamm7770

Жыл бұрын

I second that the Manual is worthless. Built it myself but could never have done it without video.

@HeroShotz

Жыл бұрын

If I didn't find this video I would have returned this as the Manual is utter garbage 😂. Finishing up today can't wait to be done.

@j.ziemer8796

3 ай бұрын

They sent me 3 middle pieces for the flooring.. I thought I was going crazy, plus my pieces weren’t labeled correctly.. never again

I finally got it put together after 3 days but it was nothing but frustration. All the roof pieces were warped by heat and the sun being summer, and unless you build it on a purely-flat surface 2x the size of the shed, it's a nightmare getting the walls and doors in place.

I would like to see the Guy put this shed together outside with the wind blowing in the Sun.

This video defanitaly made a lot easier to assemble the shed, in fact I found myself abandoning the manual and refer to the video for all the steps. Thanks for posting it.

After watching this, please make sure to pay attention to how the hardware is installed on the trusses. It really makes a difference way later. Otherwise, this video was incredibly well done, and whomever in production that kept the gentleman about to crack up upon every new segment was genius. It was actually fun to watch while doing a chore. Just a well done video and a great product! Thanks!

@G5questman

Жыл бұрын

Watching now and wondering why he wouldn't use the Phillip head end of the bolt on the outside... It would be way easier!!! I really hope there is a good reason or I'll be pretty upset for taking a longer time to install it that way.

@jjames3948

Жыл бұрын

@@G5questman believe me. It matters. Later on the whole roof won't seat properly in the most maddening way, like the kind of improper seating that screams leak! It really really mattered to me at the time because I did my base pad from scratch. I thought I was off level for a hot second. The thing is a great product, took the Floridian summer so well I forget to worry.

@G5questman

Жыл бұрын

@@jjames3948 ok thanks for the input! I happened to have a 90° bend screwdriver I kept from another project that worked easily to install it that way so it wasn't too bad.

@jjames3948

Жыл бұрын

@@G5questman Sorry bud, but my baby is a 92 XJ. Us DIY jeep idiots have to look out for each other. If we can deal with death wobble, we can handle this.

@G5questman

Жыл бұрын

@@jjames3948 heck yeah man. I just don't always trust people in videos to do the stuff the easiest way lol.

Our shed turned out great thanks

I thought the video tutorial was fabulous! Use the paper manual to make sure you have the correct fastener. My husband and I are in our 70's and we completed the shed in one day!

It would be very helpful in the video as well as the instruction manual to specify the type and size of fastener being used for each step. Particularly important when 3 different screw types and two different bolts are used for the shed assembly.

@andrewhernan1892

2 ай бұрын

You are correct. The instructions should have that.

I’m not handy at all. This video saved me. It took me 2 days but combined with the manual the shed was easy to construct.

Such a helpful video! would have taken so much longer without it. Thank you!

I was gonna use the instructions that came with, it would of took me a week if I did. The video with the instructions is the key. The first couple hours I was getting scared from unpacking and doing the doors, after the doors you start to get things done lol Also I build it on a very uneven slab of concrete and very impressed that it worked out. Looks like it level and square (it can’t be though)

Omg can you guys please label things in the box?! And maybe also say in instructions which box they are in

Overall a very good shed. It would have helped greatly if the many different metal parts were labeled. The parts diagrams in the manual were often too small to be of use in deciding how to do the assembly. The wall panels did have molded in part numbers but they were at the very bottom an inch from the edge. I fixed this with a felt pen and some masking tape but it should have been done by the manufacturer. Fortunately I chose to do the shed assembly myself and was not paying a couple of guys for extra time spent as a result of these deficiencies in the manual and in the video. Even if you are having someone else assemble the shed I highly recommend taking everything out of the two large shipping boxes and labeling parts and staging everything in advance. The video cautions about overly tightening the small nuts and screws but shows a cordless drill being used. Even on the lowest torque setting and slowest speed of my cordless drill I snapped one of the screws used for the bracing. Best to tighten these very small screws by hand.

That is a good looking shed! I love that brand too!

Thank god I found this video ..👍

Awesome & very helpful video!!

Was a very big help great job 👏🏾 on this video

@LifetimeProductsAssembly

9 ай бұрын

Glad it helped!

You're the best and amazing at building!!

Parts are not labeled and the wall install should be numbered/labeled from which corner to begin. Thank god for the video.

This video helped me out so much 😊

I was doing fine until the end...the last couple of roof panels were not lining up. I think the cement pad was not completely level. I ended up using racheting straps across the top from one side to the other...in order to pull the two sides together. It worked. Thank goodness. I then braced the entire thing for $30...instead of spending $400 on the extreme weather kit.

@brendaeb5654

2 жыл бұрын

❤️

@jakethekiteguy

Жыл бұрын

You don't by chance have any pictures of your bracing or a description of what you did?

@emmanuelloaiza2793

Жыл бұрын

I measured the pieces, and they are not even. I had the same problem at the end with just the last piece.

This video did really helped us a lot ❤❤ THANK YOU

Thank you

Can the window panel fit on either side?

Can this withstand extreme heat like 115 degrees without cracking?

Excellent job. Do you have a video for the 8x10 shed?

@LifetimeProductsAssembly

2 жыл бұрын

What model number are you looking for?

This video was a God Send lol

How do I attach it to the floor joists?

The pack of adhesive rolls what are they used for. Not referring to the thin rolls for the windows.

@mikerogs1

2 жыл бұрын

The windows on the front doors

ok my issue rn is im putting together the floor but its a newer one so the floor is a lil dif and it says each panel should have 6 divets to insurt the screws but mine on has 4?? and the floor boards wont line up nicely no matter how hard i push them together either the quality got worse or im dumb

@lancemay5350

3 ай бұрын

Exactly the sam me for me!! I’ve spent over an hour on this step and the floor is trash - the old way in the video looks great! The four tab”improvement” DOES NOT WORK. I’m worried it won’t go together in future steps

@Dsuperior123

2 ай бұрын

Same!

@jacksons1010

Күн бұрын

Ditto here as well. Only 4 screw divots and a dozen black screws left over. Could NOT get the floor panels to lie flush to each other - had to force them and secure with screws.

It doesn't go together as easily as the video shows at least here in Florida. The heat warps the panels and they become too hot to handle without gloves. We had to borrow the motto: Improvise, Adapt, and Overcome. It took two days to get it finished

Just install mine today a lot of stuff are not label and the video skips a few thing so you definitely need to watch and read the manual, was able to put this together in about 6 hours. Also having another person does help especially doing the roof. Over all wasn’t too bad good luck.

Which assembly video is closely resembled for model 60425 from BJ’s?

@LifetimeProductsAssembly

Жыл бұрын

Use this video: kzread.info/dash/bejne/q2aikrSqldOtaco.html. There's some differences so make sure you have your manual with you the whole time.

The flooring in this video is nothing like what came in my package - the video floor looks great and snapped together with ease…. Mine was WAY different with only three offset tabs and a few screws - offsets absolutely do not line up - I have tried MANy things. I went ahead and screwed it together with one inch gaps on each edge…. I expect it will be horrible later, but I have spent too many hours on this terrible step

@Dsuperior123

2 ай бұрын

Same!

@nikoramirez6913

2 ай бұрын

This is too funny 😂 I just put mine bottom part together with a buddy and I said the same thing. Drinking while putting this together does not help by the way!

Does anyone have any suggestion to make the floor more cleaning friendly. I'm puzzled as to why they would make the floor have fake separations between the "boards." All it wants to do it catch dirt and it's a royal pain to try and clean. Silly design.

@Ant-pm6ed

2 ай бұрын

Vacuum

@scottieshawn4814

2 ай бұрын

I put a cheap snap together vinyl over mine

@Ant-pm6ed

2 ай бұрын

@@scottieshawn4814 fair

Great video ! Product on the other hand came with wrong sized nuts and the life time sticker on the door upside down.

@LifetimeProductsAssembly

8 ай бұрын

That's weird. Send us an email at youtube@lifetime.com so that we can look into this further and send this along to our quality team.

Watch this video!!! Forget about the manual. Did it myself in 6hrs. Could’ve done it a little faster with a partner. (Help isn’t necessary)

Can I put the window on the opposite side?

@LifetimeProductsAssembly

Жыл бұрын

Yes it can!

34:47 34:47 followed both the instruction manual and the video step by step. The biggest struggle was the wall panels. Did not slide and snap in easily like he did on the video. Took us both in our 70's three days from start to finish . Just saying its not as easy as the video shows. Very frustrating from start to finish. Glad its done and hopefully stays together!

Thinking about adding electrical to this item. Any comments about this idea?

@LifetimeProductsAssembly

4 ай бұрын

Our sheds are not designed to accommodate electrical wiring of any kind. Unfortunately, any modifications made to the shed will void your warranty.

Can’t fit one atv

I only purchased this shed because how large it is and that it came with a video. Oh boy am I happy I did because it’s perfect and was fairly easy to put together. Took about 5 hours because I have no experience with putting anything together. Didn’t even know how to use a power drill so took me much longer. You need a second person at least for the roof.

How big should the foundation be? What dimensions?

@LifetimeProductsAssembly

Жыл бұрын

You will need to build a level surface of 93 3/4" x 88 3/16" (2,38 m 2,24 m). If you are building with concrete, make sure its 4" thick.

Why are screws not labeled on the bags they come in? It’s a guessing game trying to find the right one!

@LifetimeProductsAssembly

9 ай бұрын

Most of the time, the bag is labeled. Sometimes the smaller hardware bag is not labeled because it's in a larger, labeled, hardware bag. If you're having a hard time figuring out which screw is the right one, you can match it up to the picture in the manual. The images of the hardware (most screws, nuts, bolts, and washers), are to scale.

I cannot for the life of me get the last roof panel to line up. Either the left side is off or the right side. And forget about the final 2 corner screws. Can’t get either to line up. Checked the walls and everything is properly locked in. Don’t know what I’m doing wrong

@LifetimeProductsAssembly

2 ай бұрын

We're sorry to hear the roof panels aren't lining up. Try watching this video on how to align your roof panels- kzread.info/dash/bejne/m4WN1dSaY8jOpNY.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

@Chxrri-7

21 күн бұрын

Hey do you mind sharing what did you end up doing about your roof situation? I paid someone to build the shed yesterday and we had the exact same problem. Now the shed is not finished and I don’t know what I’m going to do…

@abbywhite3769

6 күн бұрын

@@Chxrri-7 the key is the black trusse. Making sure not too much is hanging over either side of the the shed. While inside, push it upwards and it’ll move to properly align with screw holes. Then you should be able to slide the roofing in where the corner holes will align. Also have second push on outside where you are drilling up to to make sure it’s catching the roof with the screw. Took us some giggling but it ended up seamless

When attaching the vents on the gable, it’s not clear which screws to use. I got them out of order using the big ones first and I think I screwed things up. And there are at least two bags of hardware, which is the instructions not made clear, I found the other one on the bottom. Horrible attention to detail, now I’m gonna have to go down to the hardware store and get more screws.

@LifetimeProductsAssembly

10 ай бұрын

On the right side of the video it shows all the hardware that will be used for the steps. Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

@surrelljr

10 ай бұрын

@@LifetimeProductsAssembly and the screws for the latch, the sliding part, were the wrong ones. I can get the right ones at the hardware store.

Is it normal to have several of those ADZ screws leftover???

@LifetimeProductsAssembly

2 жыл бұрын

Yes! They're there in caution.

What about the numbers in the roof top

what is the size for the foundation if I need to do it ?

@LifetimeProductsAssembly

5 ай бұрын

The foundation needs to be at least the same size of the shed, so in this case it would need to be at least 8' x 7.5'.

Bro has no idea he's an internet celebrity with 260k views!

Sam's Club has this shed on display but I had a hard time buying it bc it wasn't in their system. Then got home and no instructions s or directives. Sam's Club had a hard time even finding and telling me what to do. Please get this corrected

@LifetimeProductsAssembly

Жыл бұрын

Sorry to hear this. Please reach out to our customer service team to get this issue resolved. They can be reached by phone at +1 (800) 242-3865 or by email at customercare@lifetime.com.

@ladyj5682

Жыл бұрын

@@LifetimeProductsAssembly This video saved us. The man finally found instructions in box

Hi I’m in Northern California how much should I pay a handyman to assemble the shed ? Thx

@LifetimeProductsAssembly

2 жыл бұрын

To inquire about assembly contact our customer service team at 800-424-3865 for scheduling.

@becbarr14

2 жыл бұрын

@@LifetimeProductsAssembly thank you

Let me see the unedited version of this video lol. No way it’s struggle free. P.S. for every minute of this video it will take you at least half an hour.

i have been a heavy equipment mechanic for 35 yrs and am now retired my employer turn me loose on million-dollar equipment, I took one look at what tools I needed and how i will tackle this project and it took me just a little 5 hrs to finish the job life is good !!

@nobutur

2 ай бұрын

Took me all total... about 12, with help. Good on you. Impressive.

Is the window supposed to to be open-able? If so, why put a screw in the bottom? If not, why does it have latches and why not just have a bunch of screws around the edge like the door windows? Or is this an either/or window?

@LifetimeProductsAssembly

6 ай бұрын

Yes, the window does open. The screw goes into the window panel but not into the wall panel to keep the window pane up when it is opened.

@gardeniaburton5125

2 ай бұрын

How do one open the window.

@rjohnson205

2 ай бұрын

@@gardeniaburton5125it slides

How big are the boxes?

@LifetimeProductsAssembly

Жыл бұрын

BOX 1 (95.31" x 32" x 10.75"; 147.5 lbs) BOX 2 (95.31" x 32" x 9.63"; 218 lbs)

I'm missing a bag. What should I do?

@LifetimeProductsAssembly

3 ай бұрын

Replacement parts are available and can be ordered through our customer service department. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

This does not go together as easily as you video and the bar that is on the uprise above the door was the same as the back exactly the same plus this video was slightly helpful also still trying to put it together and this is day 2

My shelf is too short. And has no flap

Could've at least showed the screws before you torque them in.......

Bad luck for me the most of the holes in the gables pieces are missed aligned I have to ask the company to send me different pieces, the drill bit provided to drill holes for the door is broken during the assembly the video made it so easy to put it together with the exception of the pieces are nice and fit in together after 2 days of trying I am handed over to the pro . Does any one no how much it cost? Thanks

@LifetimeProductsAssembly

Жыл бұрын

I'm sorry that you're having troubles with the build. I am happy to send out any pieces you need replaced. I am also happy to take a look at some of the issues you were having during the build so we can trouble shoot some ideas on how to make the assembly easier for you. You can send images over to youtube@lifetime.com with contact information. If you're still wanting a installation expert to finish the assembly for you, you can contact our coordinators at 1-800-336-3865 opt 1. They will let you know if there is coverage in your area and will give you a quote.

@blackilluzionz

9 ай бұрын

Why the heck are the adz screws not labled?

Why are my truss’ uneven?!

@LifetimeProductsAssembly

2 ай бұрын

Try reaching out to our customer service experts to troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

Can I buy this product in Japan?

@LifetimeProductsAssembly

2 жыл бұрын

For Inquires on where to find and purchase our products in your area, email us at intlsales@lifetime.com.

@taka6281

2 жыл бұрын

Yokohama-city kanagawa prefecture. Please tell me the inside dimensions of the warehouse where you want to put your motorcycle.

@LifetimeProductsAssembly

2 жыл бұрын

@@taka6281 7 ft. L x 7 ft. 6 in. W x 5 ft. 10 in. - 7 ft. 10 in. H

Your bag letters don’t match instructions

None of my roof panels line up or fit

@LifetimeProductsAssembly

5 ай бұрын

What kind of foundation do you have the shed built on? Maybe check out our video on aligning your roof panels. Here's the link: kzread.info/dash/bejne/m4WN1dSaY8jOpNY.htmlsi=qptvvpzaxJnvzPpK

@Chxrri-7

21 күн бұрын

Hey may a I ask you what did you end up doing about your roof situation? I’m having the same issue!!

This video isn’t accurate needs to show one being out together that has issues like things not lining up properly and what to do in case of these issues

Finished this shed in 6.5 hrs video is good but manual sucks !

Uh specify

What is the music playing in this?

@LifetimeProductsAssembly

Ай бұрын

The music is from soundstripe.com.

@matthewdorre8874

25 күн бұрын

​@@LifetimeProductsAssembly do you know what the track is called? I'm almost done putting the shed together and the music would really help.

Wait a sec, so you put all the phillips screw heads on the inside where a straight screwdriver can't reach them? The solution is a Phillips bit and a pair a Vice Grips?! Engineering at its finest.

The part requiring flat tipped screws be drilled at a 45 degree angle into shallow divets that are not well designed to be entered at 45 degree angles is the reason I'm not going to buy another lifetime product requiring assembly. Your engineers took the day off when designing this part.

I can't put it straight

My wife just told me she is leaving me for John. Honestly I can't blame her.

@LifetimeProductsAssembly

3 ай бұрын

Unfortunately, John already left us... 😭

Honestly hate how the company assumes that I get internet or phone service where I live to watch a KZread video instead of just including all the steps on the paper manual. The frustration over the last couple of hours just wait for the video to load was too much.

@LifetimeProductsAssembly

2 ай бұрын

We're sorry to hear this. We try not to make any assumptions about how you prefer to assemble your product. We try to include as many help options as possible, which is why we have our assembly videos and QR codes in the manual. The video is meant to be a companion to the assembly manual, not a replacement, but you don't have to use the video. All of the steps of the assembly are in the manual.

I was suspicious to use an impact driver with plastic like this, but tried it. NOPE. Too powerful for it. I switched to a drill with an adjustable clutch.

😮😮😮😮l

21

The hardware provided is total crap

What a piece of junk. Wife bought this. After it blows away I’ll build a real one. Grandchild’s Barbie House is stronger.

Need to be better explained

This product is absolute trash. Like others have said. Most of the pieces were warped and by the time I was almost done I couldn't fit the back of the roof on.

@rock2487able

2 ай бұрын

I came across your comment as I am building this. I totally agree with you. Idk if that impact wrench had a sound patch or something cuz I been following every step with every tool and my Milwaukee keeps warping some of these holes. It is absolute trash. I will be modifying this and reinforcing with some extra steel.i will never buy this product again. And I work in retail where we sell these and I am going to be honest to my customers about this.

@Ant-pm6ed

2 ай бұрын

​@@rock2487ableidk man. My DeWalt drill worked pretty well on them screws

@DominioTv-cl3nk

3 күн бұрын

I did everything as he said and it came out easy for him while I did it and nothing worked and I followed step by step it's crap 💩

@MaxParshin-ig7mc

Күн бұрын

I’m working on this too and it is just horrible

Was anyone else’s boxes filled with roaches and roach poop? It was disgusting!

Never has a video had so much detail and information, yet show nothing of value. You can’t see the angles of where the roof is supposed to be. There’s a dozen holes on the ceiling pieces and this video does not show where they’re supposed to go.

@LifetimeProductsAssembly

Ай бұрын

The assembly video is meant to by used as a companion to the assembly manual and not a direct replacement. We recommend having the assembly manual on hand while building. The assembly manual shows a lot more detail and can show you exactly which holes the screws go into for each step.

This was the worst shed I've ever assembled. Nothing lines up! Nothing! Please stay away from this product!

@LifetimeProductsAssembly

2 ай бұрын

We're sorry to hear that you had troubles with assembly and getting things to line up. Give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

This shed is the biggest piece of garbage on the market. The pieces come warped making it nearly impossible to put together. The manual doesn’t explain nothing in depth, and this video is misleading. If you are going to build this shed you will indefinitely need a few hands to help you and pray for a miracle that everything goes well because this shed is a can of worms.

@LifetimeProductsAssembly

2 ай бұрын

We are sorry to hear that you are not happy with your new shed. We're sorry that pieces came warped, this shouldn't have been the case. Please reach out to us directly at youtube@lifetime.com so that we can try to take care of this for you.

So easy you can build it yourself....🙄 RiIIIGGHHT Building this thing SUCKED.

Alot of the time spent putting this together could have been done at factory before purchase. Guess it's free labor for them. Horrible product.

Horrible video, no closeups or anything. Just finished the shed, dumb how you can’t put the window on the other side