LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup | Part One
Автокөліктер мен көлік құралдары
Here is the LIEBHERR LTM1750 - 9.1 from Peck Tiong Choon being rigged with 56m of Luffing Jib on a closed road of Singapore. It's being used for the dismantling of a tower crane.
CAMERA GEARS I USED:
=================================================
CAMERA:
Canon EOS R50 - amzn.to/3KWhgn3
Canon RF 24 - 105 f/4L - amzn.to/47J8IK9
Mic:
RODE VideoMicro - amzn.to/3OYxqNU
=================================================
Like my video? Please give a like and subscribe to my channel!
/ sgheavyvehicles
To see more photos of such heavy cranes in action, please visit my good friend’s page on Flickr too!
flickr.com/photos/30298424@N0...
-Find Me On-
Tiktok: www.tiktok.com/@sgheavyvehicles
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provided, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel!
#mobilecrane #crane
Пікірлер: 30
LTM 1750-9.1 is really amazing crane..Love that❤ Great job👏👏👏
@SGHeavyVehicles
9 ай бұрын
Thanks a lot!
Wah. Can't wait for part 2! Side note.. Would it be possible to add in a comment to show what the crew is doing at a particular point in the video? Like extending outriggers, adding counterweight base plate etc
@SGHeavyVehicles
9 ай бұрын
Sure! Thanks for the feedback!
Super cool video! Not sure why KZread sent me to this, but I sure do love it
@SGHeavyVehicles
9 ай бұрын
Thanks for watching!
Excellent!
@SGHeavyVehicles
9 ай бұрын
Many thanks!
An entertainment fo lunch break
I thank it’s very interesting that they put on fall protection and then don’t use it but once or twice
@HotTacticalBoyfriendOfficial
7 ай бұрын
Yes, exactly! They have 2 clips so should be attaching to a second point, before detaching from the first. But working in a harness is awkward enough without being clipped-on, so some workers become relaxed about it... until they have a fall. Supervisors should be pulling them up on it, there seem to be enough of them. Not sure fall arrestors are appropriate anyway, as they are working at different heights: too low and they hit the deck before it fully deploys. Looks like a job better done out of a MEWP as far as possible and if someone has to be on the crane, then an inertia reel or airbags (or possibly a fall restraint) would be preferable.
Great video 🤓🙋♂️👍
@SGHeavyVehicles
9 ай бұрын
Thank you 👍
Luar biasa..mantap
So huge crane😮😮😮
ما شاء الله..تبارك الله..
Why are ballast/flatbed trailers in Singapore all tilted like that, higher near the fifth wheel of the tractor but becomes lower towards the rear
@SGHeavyVehicles
7 ай бұрын
Because the suspension height plus height of the fifth wheel of the tractor is higher than the trailer’s suspension 😁 There are some tractors where it’s chassis height is the same height as the fifth wheel, then you wont see this tilting effect
Alat yang cukup canggih
하루 임대비용은 얼마죠
Indonesia.❤❤❤❤❤❤
wow
Why is the lower motor still running
@SGHeavyVehicles
9 ай бұрын
The lower motor runs during the setting up of the crane, until the hydraulic and electrical connection with the Power Pack is performed.
👍👍👍👍
Consider speeding up the video. As in most construction worksites in Singapore, one worker will do the work and several other will hang around, watching but not doing very much. Good to add the basis why this crane was selected.
@SGHeavyVehicles
7 ай бұрын
I did consider speeding up before, but i feel it affects the overall mood because it can feel like im rushing through. Would you prefer short snippets kind of video?
Чи ни кран, вот РАНЬШЕ БЫЛИ КРАНЫ!!!
👍👍👍👍👍👍✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️🙏🙏🙏🙏🙏🙏🙏 indonesia..
guys. how about you clean the crane a bit.