How to remove stickers from an license plate and instructions on how to properly place the new registration sticker.
Жүктеу.....
Пікірлер: 91
@samsen2015 жыл бұрын
Honestly this is quit important topic that not many care about. Thanks for time making this.
@ScottyOfAllTrades
5 жыл бұрын
Thanks Sam Sen. Those stickers can build up and look pretty shabby over time.
@eyeballs3063 жыл бұрын
EVEN FASTER: blow dry for a good 15-20 seconds on the BACK side of the plate, behind the sticker. You only need the adhesive from the first sticker that's touching the plate to come off and then they all will. Came off in one scrape with a putty knife.
@crashthestash
2 жыл бұрын
Super easy thanks!
@juanlemos80
Жыл бұрын
Thank you!
@eli9404
10 ай бұрын
Would it be able to stick back on? I just need to remove them to paint the plates, then stick back on
@richardolivarez1265
Ай бұрын
@eli9404 did it work?
@waiwaianela4 жыл бұрын
SEVERAL years sticker build up, dreading task of removal. Always freezing cold winter at my sticker renewal time. Car’s way down in underground parking, no electrical outlet access. The Lord reminded me of my little portable hand-held steam cleaner I had forgotten about. Filled it with purified water, heated it up at home, unplugged, took it down to the car. Blasted that sucker with a bit of super hot steam, minimal scraping with utility knife, easily pulled old stickers off by hand, wiped it clean & dry, applied new sticker. NO Goo Gone/toxic messy chemicals, NO plate removal, NO hair dryer, NO agony. ALL glory goes to God, giver of all wisdom yay!!
@musicgirl80292 жыл бұрын
Thank you so much! Heated the back side with hair blower for 30 seconds. Turned plate over and picked up the corner and it came off so easy!
@BensBoringVideos4 жыл бұрын
Thanks so much for this, I've been really sick of having 10 stickers slapped on top of each other.
@coronavirus42874 жыл бұрын
With this easy trick I haven’t paid registration in years
@Jaeliona
3 жыл бұрын
lol this is the best!
@TheBarreraLifeStyle
3 жыл бұрын
I just take the whole plate
@eminusipi
3 жыл бұрын
That's good until you get caught and end making the plates😮
@illbaby86
3 жыл бұрын
@@eminusipi 🤣
@dyalikedags
3 жыл бұрын
@@eminusipi I don't get this
@suneyeintuition43154 жыл бұрын
Unscrewed my plate and brought it inside...was all prepared to attack it with hair dryer, putty knife, and Goo Gone..... Just a hair dryer on it for a few seconds did the job and the labels came right up. Used the putty knife to help it, but it didn't require much effort. Wasn't even any sticky residue. Wiped it off with a Clorox wipe and called it good. Sometimes it's that easy. lol And we're talking eight years of stickers.
@1ftsports6782 жыл бұрын
They can make self driving cars now...but we still have this sticker system from the 1950's.
@nukevader
Жыл бұрын
🤣 so true!!
@martinserrano712610 ай бұрын
I restored my 1960 CA plates and removed the old sticker with ease. Thanks
@kroto74512 жыл бұрын
Nothing to do with the removal instructions, but how did you go from skinny fingers to sausage fingers back to skinny fingers lol. It's messing with my mind. 1:07 your fingers and arms look plump compared to the rest of the video.
@Michigan-Tactical Жыл бұрын
Your method will certainly work, I was prepared to use heat myself. I tried straight isopropyl alcohol and it worked extremely well. I only had one sticker to remove. (I put mine in the wrong location so I fixed it when I renewed) Anyway, I would try alcohol before getting out scrapers and heat guns. Just saturate the area and let it sit a few seconds before slowly peeling. If that doesn't work then get the heaters.
@AnimaSola3o410 ай бұрын
THANK YOU. I wanted to fully remove and clean the plates this time, so all the tips I was finding were about getting them off while on the car. It's too hot out for that mess lol
@SarahZuno4 ай бұрын
THANK YOU!!! I've been tasked with updating the tag on my bf's car (I drive it daily) and I used to try and use a quarter taking off teeny tiny pieces at a time. This will be a life saver...and won't scrape any paint off the actual plate.
@sammyjeong61173 жыл бұрын
Genius video. I just baked my license plate on the stove to take the adhesive off and it worked.
@andythefork
Жыл бұрын
Haha I was just thinking about this. Thanks for paving the way
@raymondperez35535 жыл бұрын
Great idea!! Wish I would have known this before I Scratched mine .
@itskj19142 жыл бұрын
Easiest way is to just take a eagle butane lighter and hit it going over it a few times then take a flat head screwdriver and it'll come right off. No need for a heat gun at all. But if you have one and no butane lighter, then this will work just the same.
@gmp36994 жыл бұрын
Thank you for your video. There's a right way and a wrong way to do something so your video is appreciated.
@TJ-qz6hr4 жыл бұрын
I have a pickup truck I bought new in 1972, the stack of stickers on the plate looks like the leaning tower of Pisa.
@clalyrics441
4 жыл бұрын
Ha ha ha!!!
@joeyoung1498
4 жыл бұрын
Lol
@sunflower-oo1ff
2 жыл бұрын
yeah...they say after 4 stickers you should peel it off...sadly I don't have the tool he has. :(
@darlenedejohnette51803 ай бұрын
TY!!! Always wondered how to get those old crinkled stickers of. Done!!!
@kh2140 Жыл бұрын
Just did it. Worked great.
@user-hu7wf9xr7i2 ай бұрын
Excellent video!
@bigbrownrooster41672 жыл бұрын
My plate looks clean af now thanks man 😂
@josepht81622 жыл бұрын
Absolutely resourceful thanks for the "how to" vid
@socalbirderchick8443 Жыл бұрын
This really works! Thank you!!!
@lauramarie8633 Жыл бұрын
Thank you! So much easier 🙂
@lileskimo77423 жыл бұрын
Thank you. You saved me from my best friend killing me😂
@snazz11582 жыл бұрын
Excellent. Thank you
@MrJersey Жыл бұрын
Awesome video! The heat gun helped me!
@ScottyOfAllTrades
Жыл бұрын
Glad it helped!
@yoda24862 жыл бұрын
Cool vid man Thanks
@dr3wbyyy3 жыл бұрын
Thanks for the tip
@EddieArtistic3 жыл бұрын
Awesome thanks.
@cedellablackmore65283 жыл бұрын
I tried your method on one side, OMG the sweat, ended up removing some of the paint. Took it and put it is hot soapy water, let it set and Viola the pile on the other side peeled off and the paint stayed on. Simple
@stephenmeche8418 Жыл бұрын
Used a hair dryer and it also removed the Paint, thanks
@sandyhancock55215 жыл бұрын
Do not try this on California legacy plates! You will take the black paint with it!! I've done this for years on the white plates and had no trouble but,the paint on the Legacy plates is not very good! Just be real careful!👍
@Michigan-Tactical
Жыл бұрын
Try rubbing alcohol. I used 91% and mine came right off. I started scraping with my fingernail and noticed the paint chipping but when I used the alcohol it came right up.
@jimc61444 жыл бұрын
Do you suppose one of those little butane torches would do the trick?
@jimc6144
3 жыл бұрын
@Crown Plaza Rosemont Hired CCTV Expert Video Editor get a life
@melaniezarth11093 жыл бұрын
You could always just stick all the years all over the place like a scrapbook, you know, to remember the good times in 2015 that you were registered. 🤦♀️ I see this way too often and it drives me nuts!
@roxiefrausto-thiessen873 Жыл бұрын
I have to remove the sticker from my husbands car because we accidentally placed the my car sticker on his car!! I'm getting too old LOL. Anyway after i remove the sticker do you know how to stick it back onto another car???
@surenkv64612 жыл бұрын
Everyone using Same style for removing.. hair driver.. new born baby knows this idea.
@jimmadsen1219
Жыл бұрын
I didn't. I guess I use to know that when I was born, but i"m old now, and forgot that stuff.
@lylekobishop22725 жыл бұрын
2020 sticker already
@ppt34922 жыл бұрын
but how to remove it, but not damage it?
@kaysav90064 жыл бұрын
Can you make a tutorial how to put stickers back on lol
@larrysmith6797
3 жыл бұрын
Mark the exact position of the new sticker with masking tape. Put a few drops of dishwashing liquid in a cup of water. Use your finger to wet the location of the sticker on the plate. Remove the sticker backing. Dip the sticker in the soapy water. Now you can slide the sticker around to the exact position you marked with the making tape. Just make sure everything is wet and you'll be able to position the sticker exactly where you want. Then, working from the center of the sticker to the edge, press the sticker to the plate. It will adhere as you squeeze the water out from between the plate and sticker.
@kingbosh18764 жыл бұрын
Why does it take so much to properly replace a sticker when people just wipe and place that shit on the old one
@llewellyn563 жыл бұрын
i do the same. some people have 6 decals all over so stupid
@disciprine Жыл бұрын
I did this and the paint on the license plate came off lol
@dyalikedags3 жыл бұрын
Just having your car in Chicago summer outside is hot enough
@goddessoshun14934 жыл бұрын
Mine wont fucking come off
@jbsantos172 жыл бұрын
Cant we just wait for a hot summer day and take it off then?🤣
@misterscruffle3 жыл бұрын
Too much effort lol
@katamichi80034 жыл бұрын
Pro tip: for those that want to remove a license plate tag with minimal damage for "reason" 1: take off your license plate 2: use a lighter to heat the bottom of the license plate for 5 to 10 seconds. 3: use a razor blade too lightly Peal the corner of the tag. 4: slowly remove the tag while while keeping the bottom surface of the license player hot. Note if you burn your hand on the surface of the tag its too hot. ( I do not condone the act of stealing license plate tags for illegal use and this information is for novelty use only)
@mickeydarkeyez1646
4 жыл бұрын
thank you!
@lori5404
Жыл бұрын
Works. Can confirm 😉
@maryrodger51304 жыл бұрын
Only a man would think of taking the plate off in order to take the sticker off!
@honestreview2432
4 жыл бұрын
What a ridiculous comment.
@maryrodger5130
4 жыл бұрын
@@honestreview2432 Not really but it is ridiculous to remove the plate to just remove a sticker. But you and others just have to over dramatize an easy chore don't cha.
@honestreview2432
4 жыл бұрын
@@maryrodger5130 You're just nasty. Why even review a video of no interest to you? Go troll somewhere else. But you can't help yourself, can you? Pathetic.
Пікірлер: 91
Honestly this is quit important topic that not many care about. Thanks for time making this.
@ScottyOfAllTrades
5 жыл бұрын
Thanks Sam Sen. Those stickers can build up and look pretty shabby over time.
EVEN FASTER: blow dry for a good 15-20 seconds on the BACK side of the plate, behind the sticker. You only need the adhesive from the first sticker that's touching the plate to come off and then they all will. Came off in one scrape with a putty knife.
@crashthestash
2 жыл бұрын
Super easy thanks!
@juanlemos80
Жыл бұрын
Thank you!
@eli9404
10 ай бұрын
Would it be able to stick back on? I just need to remove them to paint the plates, then stick back on
@richardolivarez1265
Ай бұрын
@eli9404 did it work?
SEVERAL years sticker build up, dreading task of removal. Always freezing cold winter at my sticker renewal time. Car’s way down in underground parking, no electrical outlet access. The Lord reminded me of my little portable hand-held steam cleaner I had forgotten about. Filled it with purified water, heated it up at home, unplugged, took it down to the car. Blasted that sucker with a bit of super hot steam, minimal scraping with utility knife, easily pulled old stickers off by hand, wiped it clean & dry, applied new sticker. NO Goo Gone/toxic messy chemicals, NO plate removal, NO hair dryer, NO agony. ALL glory goes to God, giver of all wisdom yay!!
Thank you so much! Heated the back side with hair blower for 30 seconds. Turned plate over and picked up the corner and it came off so easy!
Thanks so much for this, I've been really sick of having 10 stickers slapped on top of each other.
With this easy trick I haven’t paid registration in years
@Jaeliona
3 жыл бұрын
lol this is the best!
@TheBarreraLifeStyle
3 жыл бұрын
I just take the whole plate
@eminusipi
3 жыл бұрын
That's good until you get caught and end making the plates😮
@illbaby86
3 жыл бұрын
@@eminusipi 🤣
@dyalikedags
3 жыл бұрын
@@eminusipi I don't get this
Unscrewed my plate and brought it inside...was all prepared to attack it with hair dryer, putty knife, and Goo Gone..... Just a hair dryer on it for a few seconds did the job and the labels came right up. Used the putty knife to help it, but it didn't require much effort. Wasn't even any sticky residue. Wiped it off with a Clorox wipe and called it good. Sometimes it's that easy. lol And we're talking eight years of stickers.
They can make self driving cars now...but we still have this sticker system from the 1950's.
@nukevader
Жыл бұрын
🤣 so true!!
I restored my 1960 CA plates and removed the old sticker with ease. Thanks
Nothing to do with the removal instructions, but how did you go from skinny fingers to sausage fingers back to skinny fingers lol. It's messing with my mind. 1:07 your fingers and arms look plump compared to the rest of the video.
Your method will certainly work, I was prepared to use heat myself. I tried straight isopropyl alcohol and it worked extremely well. I only had one sticker to remove. (I put mine in the wrong location so I fixed it when I renewed) Anyway, I would try alcohol before getting out scrapers and heat guns. Just saturate the area and let it sit a few seconds before slowly peeling. If that doesn't work then get the heaters.
THANK YOU. I wanted to fully remove and clean the plates this time, so all the tips I was finding were about getting them off while on the car. It's too hot out for that mess lol
THANK YOU!!! I've been tasked with updating the tag on my bf's car (I drive it daily) and I used to try and use a quarter taking off teeny tiny pieces at a time. This will be a life saver...and won't scrape any paint off the actual plate.
Genius video. I just baked my license plate on the stove to take the adhesive off and it worked.
@andythefork
Жыл бұрын
Haha I was just thinking about this. Thanks for paving the way
Great idea!! Wish I would have known this before I Scratched mine .
Easiest way is to just take a eagle butane lighter and hit it going over it a few times then take a flat head screwdriver and it'll come right off. No need for a heat gun at all. But if you have one and no butane lighter, then this will work just the same.
Thank you for your video. There's a right way and a wrong way to do something so your video is appreciated.
I have a pickup truck I bought new in 1972, the stack of stickers on the plate looks like the leaning tower of Pisa.
@clalyrics441
4 жыл бұрын
Ha ha ha!!!
@joeyoung1498
4 жыл бұрын
Lol
@sunflower-oo1ff
2 жыл бұрын
yeah...they say after 4 stickers you should peel it off...sadly I don't have the tool he has. :(
TY!!! Always wondered how to get those old crinkled stickers of. Done!!!
Just did it. Worked great.
Excellent video!
My plate looks clean af now thanks man 😂
Absolutely resourceful thanks for the "how to" vid
This really works! Thank you!!!
Thank you! So much easier 🙂
Thank you. You saved me from my best friend killing me😂
Excellent. Thank you
Awesome video! The heat gun helped me!
@ScottyOfAllTrades
Жыл бұрын
Glad it helped!
Cool vid man Thanks
Thanks for the tip
Awesome thanks.
I tried your method on one side, OMG the sweat, ended up removing some of the paint. Took it and put it is hot soapy water, let it set and Viola the pile on the other side peeled off and the paint stayed on. Simple
Used a hair dryer and it also removed the Paint, thanks
Do not try this on California legacy plates! You will take the black paint with it!! I've done this for years on the white plates and had no trouble but,the paint on the Legacy plates is not very good! Just be real careful!👍
@Michigan-Tactical
Жыл бұрын
Try rubbing alcohol. I used 91% and mine came right off. I started scraping with my fingernail and noticed the paint chipping but when I used the alcohol it came right up.
Do you suppose one of those little butane torches would do the trick?
@jimc6144
3 жыл бұрын
@Crown Plaza Rosemont Hired CCTV Expert Video Editor get a life
You could always just stick all the years all over the place like a scrapbook, you know, to remember the good times in 2015 that you were registered. 🤦♀️ I see this way too often and it drives me nuts!
I have to remove the sticker from my husbands car because we accidentally placed the my car sticker on his car!! I'm getting too old LOL. Anyway after i remove the sticker do you know how to stick it back onto another car???
Everyone using Same style for removing.. hair driver.. new born baby knows this idea.
@jimmadsen1219
Жыл бұрын
I didn't. I guess I use to know that when I was born, but i"m old now, and forgot that stuff.
2020 sticker already
but how to remove it, but not damage it?
Can you make a tutorial how to put stickers back on lol
@larrysmith6797
3 жыл бұрын
Mark the exact position of the new sticker with masking tape. Put a few drops of dishwashing liquid in a cup of water. Use your finger to wet the location of the sticker on the plate. Remove the sticker backing. Dip the sticker in the soapy water. Now you can slide the sticker around to the exact position you marked with the making tape. Just make sure everything is wet and you'll be able to position the sticker exactly where you want. Then, working from the center of the sticker to the edge, press the sticker to the plate. It will adhere as you squeeze the water out from between the plate and sticker.
Why does it take so much to properly replace a sticker when people just wipe and place that shit on the old one
i do the same. some people have 6 decals all over so stupid
I did this and the paint on the license plate came off lol
Just having your car in Chicago summer outside is hot enough
Mine wont fucking come off
Cant we just wait for a hot summer day and take it off then?🤣
Too much effort lol
Pro tip: for those that want to remove a license plate tag with minimal damage for "reason" 1: take off your license plate 2: use a lighter to heat the bottom of the license plate for 5 to 10 seconds. 3: use a razor blade too lightly Peal the corner of the tag. 4: slowly remove the tag while while keeping the bottom surface of the license player hot. Note if you burn your hand on the surface of the tag its too hot. ( I do not condone the act of stealing license plate tags for illegal use and this information is for novelty use only)
@mickeydarkeyez1646
4 жыл бұрын
thank you!
@lori5404
Жыл бұрын
Works. Can confirm 😉
Only a man would think of taking the plate off in order to take the sticker off!
@honestreview2432
4 жыл бұрын
What a ridiculous comment.
@maryrodger5130
4 жыл бұрын
@@honestreview2432 Not really but it is ridiculous to remove the plate to just remove a sticker. But you and others just have to over dramatize an easy chore don't cha.
@honestreview2432
4 жыл бұрын
@@maryrodger5130 You're just nasty. Why even review a video of no interest to you? Go troll somewhere else. But you can't help yourself, can you? Pathetic.
@maryrodger5130
4 жыл бұрын
@@honestreview2432 You boys are so delicate. ;o)
@honestreview2432
4 жыл бұрын
@@maryrodger5130 You are a born loser.