A wounderful case. Thanks for showing it up, props to you! 👏

@PCCrazyDario

7 ай бұрын

It really is. Thanks for the comment. :)

Very nice case, great features. Very clever way to get three glass panels to connect. Great review, very well deserved award for Lian-Li i must say.

@PCCrazyDario

7 ай бұрын

Thanks for summing everything up. I do agree, and for the award, I think it is suitable. :)

@Adapt485

Ай бұрын

yes but -3 fans

The look is incredible and how incredible it is, there is glass everywhere, once again Lian Li bringing great innovations, I really don't know what they're going to launch now with this one, I imagine they've already used up all the "gun ammunition", but personally I still prefer it the appearance of the stemless EVO XL.

@PCCrazyDario

7 ай бұрын

Honestly, I think Lian Li always has something up their sleeves to inovate and surprise us, which I am really looking forward to. :)

Yellow is the right color for this built!

I would like to ask if air cooler is possible for this case and if you could please test it out ?

Wihout a push/pull build on the raidator inkate will be enought for cooling cpu with only 3 fans ?

Cool case! So I guess the O11 Evo RGB won't be released then?

@PCCrazyDario

7 ай бұрын

I don’t know. I think it is best to wait and see if they release it…

Hi did your review version come with tinted glass? I'm hoping the black version is slightly tinted

@PCCrazyDario

6 ай бұрын

It actually is and my bad for not mentioning that.

🔥🔥

@PCCrazyDario

7 ай бұрын

🙌🙌🙌

シャーシはベンチ台に使えるかな。

Better is the RAD with the hoses on the bottom. Now you have the chance to pump air bubbles.

@PCCrazyDario

6 ай бұрын

Pump not heights point of the loop. Pump good. Pump no air. Pump not die.

@monstershayne

6 ай бұрын

It doesnt hurt anything

@r.s.4553

6 ай бұрын

If the air pocket in the rad is too big, there is a change to pump air bubbles. It won't kill the pump, but it is not good for cooling performance.

@monstershayne

6 ай бұрын

@@r.s.4553 the difference is negligible. I've had mine mounted that way for years with 0 issues

@PCCrazyDario

6 ай бұрын

@@monstershayne Of course because this is normal. The pump isn’t the highest point and bubbles won’t get inside the pump. Worst scenario is if the tubes are at the bottom, the the bubbles go either to the top of the rad or top of the pump. So what others don’t understand, physics.

There is a theory that placed on the side or front of the case, the best position for the water cooler would be with the hoses at the bottom, where the air would be trapped in the upper part of the water cooler block, with no possibility of going to the bomb. I have the Asus tuf gt502, I want to put the water cooler on the side, if I put it on the side with the water cooler hoses on top, can the air really go to the pump? If I place the hoses at the bottom I won't be able to place three fans at the bottom of the case.

@PCCrazyDario

3 ай бұрын

No, physics. Air bubbles always go to the highest point. So the only thing you need to consider is that the pump is lower than the highest point of your AIO. In those terms, pump must not be in the highest position. So tubes running from the top part of the radiator isn’t a problem, as long as the pump is lower than that. Theory is one thing, practice is something else, and then there are basics of physics. 😉

Hey, are the three bottom fans 140mm? Or 120mm reverse blade ?

@PCCrazyDario

6 ай бұрын

Hi, all are 120mm fans, bottom and side are reverse blades. The rear two are regular, exhaust.

@TormentooRD

6 ай бұрын

Thank you for the info 🙏🏼🙏🏼🙏🏼 it’ll help a LOT with my new build

@PCCrazyDario

6 ай бұрын

@@TormentooRD You are very welcome. :)

The case needs to be a bit bigger and shroud to hide the cables at the top of the mobo. Otherwise it's perfect

@PCCrazyDario

6 ай бұрын

You could reroute it to the lower hole right beneath the one I did. My bad.

@Gettermarine

6 ай бұрын

@@PCCrazyDario I dont think its your problem. If the case is a bit taller, it can provide room for a 240 AIO at the back and provide enough clearance for a vertical moutned gpu (since the point of the case is asthetics). The top cables need a shroud/cover regardless. This is something Lian Li has dropped the ball for most of its cases. I had to make my own shroud similar to the NV7 to cover the ugly 3/4pin cables.

Any update of deepcool ch780

@PCCrazyDario

7 ай бұрын

So far no words on the release date unfortunately. But when it does come, be sure I will have it for review.

What do you think guys its not to much glass?

@PCCrazyDario

7 ай бұрын

They didn't sacrifice the cooling, so I would say epic for those who want the maximum visibility of the parts and to enjoy your build to the fullest.

@tomastomejus1982

7 ай бұрын

@@PCCrazyDarioBut how come they not loosing cooling when best way to escape for ear its true the top?What ethe numbers temp.?

@tomastomejus1982

7 ай бұрын

Compering other cases and how would efect in long time of gaming maybe temp would build up more inside the case?Buy the way beautiful build !!!!😍

@PCCrazyDario

7 ай бұрын

@@tomastomejus1982 Well I stress test each case, AIO and air cooler the same. 30 minutes AIDA 64 at full load and after that Cinebench 10 consecutive runs. It's the same as gaming, I know, but then again, rarely you will come across that game uses 100% of a CPU or GPU. Thank you very much!! :D

@tomastomejus1982

7 ай бұрын

@@PCCrazyDario You would be suprize playing Warzone :D But thanks for your answers you gave me more confidence in buying this case🙏

Poor radiator… no wanda it’s 90 degrees

why you guys keep sayign at bottom just take 2x 140mm when can take 3x?? dont say wrong info to ppl that se yoru videos