There are a few reviewers on this case. No one points out about the flaws and you've pointed them out. The efforts you've put into and to share your experiences are admirable. Thank you Kleo, again another great review.

@KleoYan

7 ай бұрын

Hi Nox, welcome back and thank you for your kind words. I believe each and every reviewers are unique. Some are helpful too.

Hi Kleo 👍 Very versatile case with excellent build quality. Lian Li are making the best cases at present with other high end manufacturers cloning the Lian Li style. No gimmicks just great features on every case. Their design team deserves around of applause 👏

@KleoYan

7 ай бұрын

Hi Wayne, welcome back. Yup this is part of the reason I kept using Lian Li's case. I do wish one day they will bring back the full aluminium build cases.

This is awesome! Great review. I have an 011 d, but now I want the vision! 2 things I wish they would do - allow you to remove the mesh panel section behind the cpu to make cpu cooler maintenance easy, and since the psu bracket is removable and redundant, it would become useful if they allowed you to swap the harddrive bay wall and the cpu mount, top to bottom. Then being removable would make sense, And you would then have space to put pump/reservoir combo if you want it on bottom floor, or psu on bottom if wanted. I have always appreciated lion li's quality and attention to detail.

@KleoYan

7 ай бұрын

Hi Miia Sutherland, welcome to my channel. Thank you for your kind words. As what you have suggested, allow me to feedback your suggestion to Lian Li. Thank you for your feedback, greatly appreciated it 👍

Another superb case from Lian Li. Minor negatives for me, on/off switch separate from the front IO. HDD cages, in a case like this most people are going to be using SSD, so why not use that space better... extra fan location? No fans included. And that is all that I could think of. So I am still going for the 216.

@KleoYan

7 ай бұрын

hi Julie Fisher, welcome back and yes, I do agree with you about the HDD cages. it will be good to have somemore ventilation.

@Jules_Diplopia

7 ай бұрын

@@KleoYan A suggestion to Lian Li, just in case they are reading this. I would love this case (the O11 Vision), but why not offer discounted optional extras, like fans. Or perhaps include vouchers for those who buy this case to get a discount on the fan of their choice. I know that your margins are probably tight, but a slip of paper (voucher) to get a further sale, is an easy upselling opportunity, and further ties a customer into your "eco-system".

@KleoYan

7 ай бұрын

@@Jules_Diplopia Alrighty, will do a screenie and to forward you suggestion to them. thank you 😉

Great review, one thing I'm don't really like about this case is the odd size they chose for the bottom fan and radiator bracket. It leaves an odd-looking gap if you use a 360mm radiator at the bottom but isn't large enough for a 420mm radiator. It appears to be designed exclusively for a 3x140mm fans at the bottom. I guess if I were to build in this case It would work really well for a CPU AIO, but it gets kind of sloppy if you want to liquid cool your GPU.

@KleoYan

7 ай бұрын

Hi Daniel Smith, welcome to my channel and thank you to have shared your thoughts. I do share the same sentiment like you did. Personally, if space is not an issue for my desk, I will prefer to use an O11D Evo XL. Thanks again for your valuable feedback 👍

😍😍🙌

@KleoYan

7 ай бұрын

😁😁😁😁

can you fit 3x140mm fans on the bottom if you vertically mount a 7900xtx?

@KleoYan

Ай бұрын

hi Mohamed Ahnaf, the spacing is very tight. If i want to mount the bottom fans, I can't mount my vertical mount bracket. you can give it a try but I do not advise it. If you are able to, kindly share with us too on which mount did you use and such. Thank you!

Any idea is the internal structure is steel or aluminum..been looking at magnetic mount argb hub for this casing

@KleoYan

5 ай бұрын

Hi Keippei Loh, welcome to my channel. Internal is steel not aluminium.

How does this case compare with other cases you have tried in terms of airflow?

@KleoYan

7 ай бұрын

Hi Sevsnk, welcome to my channel, this case will need a lot of planning for me and this might interest you. kzread.info/dash/bejne/qWmlmtd7gJjefNo.html

It's a nice case but I wouldn't drop it accidentally

@KleoYan

7 ай бұрын

Hello M.Indra Soyat

Mr Yan, is it possible to apply vertical GPU mount in low mode, but still installed 3x 140mm fan in bottom?

@KleoYan

4 ай бұрын

Hi Jenar obZen, welcome to my channel, I have tried before I do up this content and I wasn't happy with the vertical mount in this case, as I can't fit 3 x fans at the bottom, be it 120mm or 140mm when motherboard tray is at low mode and at high mode you can but you will scacrfies one of the rear 120mm fans, which is a no go for me.

Thank you for your review! Can you install upright GPU?

@KleoYan

7 ай бұрын

Hello Bucky Soliman, welcome to my channel. Unfortunately no you can’t.

@davidebruni8707

7 ай бұрын

​@@KleoYandi.you try the kit for o11 XXL?

@KleoYan

7 ай бұрын

@@davidebruni8707 hi, welcome back, I believe I have replied to your question. I am not familiar with the O11D XL and based on Lian Li's website, they have not mentioned anything about the upright gpu kit.

@davidebruni8707

7 ай бұрын

@@KleoYan ok thank you a lot, i think the kit for the o11 XL can work because it is locked to the side of the case instead to the top

@KleoYan

7 ай бұрын

​@@davidebruni8707 I see, ok you can give it a try. Do share with us your experience if it do. thank you!

Hello, what do you recommend I do for my pc build? I have a 011D EVO case with the latest Lian Li Galahad 2 LCD 360 AIO that comes with the pre-installed SL Infinity fans on it. I also have 6 single reverse blade fans. Is it ok to connect the 6 fans to just the 1 AIO controller? Or should I have a 2nd controller? I also heard the wiring to the mobo is optional and you can just use the controller for the Lian software instead. Is that right?

@KleoYan

7 ай бұрын

Hi 弑神者toby, welcome to my channel. Yes you can plug all the same uni fan family to the controller that comes with liquid AIO, just make sure that the rest of your uni fans are of single pack and not 3 pack set. Reason is, the cable connectors on the single pack is catered for the controller that comes with GA II LCD Infinity. If you have purchased 3pack set, then swap the controller and plug your GA II LCD Infiinty radiator fans to the controller. As mentioned, you can just use 1 controller, just make sure that each port do not go beyond 4 fans or if you are to do bridging, do not go beyond 6 fans. Last but not least, yes you can depend on L-Connect 3 to control your fan's argb and rpm by just plugging the USB cable between your controller and on your motherboard. You can operate your fans through L-Connect 3 app without having to plug the argb and pwm cables to your motherboard. you can take this for some reference kzread.info/dash/bejne/dZuq17d_lcnMaLg.htmlsi=4js2QahEKHs3K1eW

@Kevvv.3is

7 ай бұрын

@@KleoYan Thank you for being so informative. You are very helpful with your detailed explanation. Ijust did that and currently my pc is at AMI screen where it says CPU Fan speed detection error. Please ensure your CPU cooler is properly connected to the CPU_Fan header. Consider dropping ”CPU Fan Speed Lower Limit” or simply set it to “ignore” in BIOS if problem persists. The white wire that is directly connected to the AIO went to the AIO_Pump header. Should that cable be on the CPU_Fan / CPU_OPT header instead of the AIO_Pump header? What do you recommend I do in this situation? My motherboard is the ASUS ROG Strix X670E-A. The manual says the AIO_Pump 1A 12W and the CPU_Fan/OPT is 1A 12W.

@KleoYan

7 ай бұрын

@@Kevvv.3is Hi, leave the AIO Pump header to the AIO_Pump, now to resolve this prompt which says "CPU Fan Speed Lower Limit", you have two options, Option 1 - for the radiator fans (SL Infinity 120), thare are two connectors, one which is for your argb and other is the PWM connector. you can leave the ARGB 3pin to your uni controller, as for the PWM Connector, plug it to CPU_FAN. Make use of the UFEI HW Monitor to set your fan curve. Option 2 - Go to UEFI and to set ignore. my honest opinion is to do option 1. in the event if the uni controller is down. only argb is affected and your fans are still running to keep your processor cool.

@Kevvv.3is

7 ай бұрын

@@KleoYan It worked, I don’t get that screen anymore when booting up. Btw is it normal for my cpu to idle at 53c-60c and gaming around 65c-78c? I have the Ryzen 7 7800x3d CPU with the Radeon RX 7900 XTX. I have set the power plan to Balanced and OC the memory by enabling DOCP. I bought 2 same Galahad LCD AIO cooler the first one idle was at 40c-45c and on load 60c-65c.I removed the first one and after I installed the 2nd one it went up to those temps. I run the 6 intake 3-4 exhaust A style from your video. 3 intake on bottom 3 intake on right side panel. AIO Exhaust on top and 1 exhaust on rear. The fans in L Connect are set to default standard speed.

@KleoYan

7 ай бұрын

@@Kevvv.3is it's normal, to have load on a 7800X3D, max temp at 78 degrees is excellent. The reason of why both your galahad have different temp. It's mainly on how you apply the thermal paste and the pressure balance on how you mount your AIO Block to your processor. I am not sure how you did your thermal paste but you can try using my method, it always works for me to get good temp kzread.info/dash/bejne/qo5mtJarn6mXj7Q.htmlsi=TQyHPXmHwA0e1FDa

I suppose this case is not for mainstream audience.

@KleoYan

7 ай бұрын

Hi Kevin Winston, welcome to my channel. I wouldn't say if this case is for mainstream or not for mainstream. it's up to individual of what they wanted. If you ask me personally. I would want this case but with not so highend system.

Is Asus TUF GT502 better than Lian Li 011 vision?

@KleoYan

6 ай бұрын

Hi Ray shiro, welcome to my channel, Both chassis are well build, both fish tank style, Vision is more appealing in terms of visiual and it's slightly bigger, GT502, looks like a tank. some will like it some will not like it. As for airflow. GT502 is on the upper hand as it has top exhaust fan. I do not know how to define which is better, each have it's own advantage and disadvantge. The choice is yours.

Can i mount gpu in upright position with the kit for o11 xxl? Thank you

@KleoYan

7 ай бұрын

Hi Davide Bruni, welcome to my channel. I am not familiar of the O11D XL and reading from Lian Li specs, does it have a upright mounting kit for GPU? so sorry, unable to answer your question.

@davidebruni8707

7 ай бұрын

@@KleoYan yes the model of the bracket is O11DEXL-1X

@KleoYan

7 ай бұрын

@@davidebruni8707 hi, I will bring your replies from another content. both are of the same question. @davidebruni8707 6 hours ago @KleoYan ok thank you a lot, i think the kit for the o11 XL can work because it is locked to the side of the case instead to the top ​ @davidebruni8707 I see, ok you can give it a try. Do share with us your experience if it do. thank you!

Looks like I can fit 3 140mm fans on bottom?

@KleoYan

5 ай бұрын

Hi G Weezy, welcome to my channel. My bad and yes you can mount 3 x 140mm fans.

@G_Weezy

5 ай бұрын

@@KleoYan Thanks for the welcome. I have the Vision case and waiting for more parts to arrive to build in it. I purchased 2 Lian Li Uni SL140 V2 for my 280mm AIO. Almost returned it but I purchased a Lian Li II Galahad Performance 360. Figured I’ll get another 140mm for the bottom since I have 3 SLV2 120 reverse and 3 SLV2 120.

@KleoYan

5 ай бұрын

@@G_Weezy I see, that's good, brings more air to the case.

hi Kleo, can an 420 arctic freezer ii fit vertical on this case?

@KleoYan

4 ай бұрын

Hi Vasileios Saloufas, this case does not support 420 liquid aio

@vasileiossaloufas2994

4 ай бұрын

i can see in other video of you the Lian Li Evo RGB can support 420cm on the top and it's length is 47,8cm, this one is longer 48cm so it's kinda strange how the evo can support 420cm AIO and this one the Vision can't even on the button

@KleoYan

4 ай бұрын

@@vasileiossaloufas2994 Hi, i think you have to take a closer look. for this case, for this o11 vision, the top is a tempered glass wihout any frame, you can't mount anything at the top. as for the Evo RGB, the top is not tampered glass and it has a frame, but you will need a set of special bracket which is provided with the case to mount a 420 liquid aio in place. kindly watch this for EVO RGB kzread.info/dash/bejne/omapktqYoZipoJc.htmlsi=f1J0m4OexaiLDeSp&t=1052 .

@KleoYan

4 ай бұрын

Hi Vasileios Saloufas, You have asked me a question but I can't see in this comment, but I will answer to your question which I recieved the notification from KZread. your question Vasileios Saloufas yeah I know in vision you can't put 420cm aio in the top because of the glass but I would guess you could put in the bottom as it has the same length as Evo, so the problem is the bracket? they didn't provide a bracket with Vision to support 420cm on the bottom? Answer is, do not mount liquid AIO radiator at the bottom as it will damage your pump easily, that's why there are no brackets provided for you to mount it at the bottom.

15:20 Please DO NOT mount your radiator like this. I beg! Never mount a AIO on the bottom of any case.

@KleoYan

25 күн бұрын

Hi JKD456, welcome to my channel. Thank you for your feedback and yes, do not place liquid AIO at the bottom. I have mentioned not on liquid AIO but if you want to do custom water loop you can place a radiator there. It’s just an illustration.

I don't know man As much as i love lian li but in my eyes this case is a fail It has very bad and unequal airflow They should give the evo rgb more love and should consider in developing a o11 mini evo instead Very sad to see lian li waisting so much energy on useless showcase cases like this

@KleoYan

7 ай бұрын

Hi JJ welcome back and thank you for your feedback. As usual will do a screenie and to submit to Lian Li. Infact it will be good if you voice out that Lian Li’s Reddit. The chances for them to read it is higher compared to commenting in my channel. Nevertheless thank you for the feedback.