I know literally nothing about dryers and this video helped me fix mine! $10 and no more crumply air-dried towels. Thank you!❤

Thank you so much! Everything works, and I feel good about not having to call anyone for help! Appreciate this video very much!

@repairclinic

7 ай бұрын

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

It is working again!! Thank you so much

@repairclinic

5 ай бұрын

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

Great instructional. Just saved me a bunch of money. Thank you!

There is absolutely "no" sense in removing all of those parts. If you are handy at all there is a screw in the back where your air duct connects. Remove that screw and slide the exhaust piece all the way out. Your fuses are right there. You can do it. Just takes patience. Dont follow the video. It is way to much work. I did it the 1st time. Not smart. You are welcome.

@Tyrone_Williams

Жыл бұрын

You = the man, thanks!

@noch

11 ай бұрын

This is the REAL answer

@LEDIV1978

10 ай бұрын

I was just thinking that when I took the vent out to check and see if the fuse was tripped but my model like this one doesn't trip/reset so after running diagnostic no codes but vent and cleaning vent and wall flute I'm still not getting any codes or heat so I'll replace the thermal fuse and thermostat and hopefully I'll be all good!

@michaelbrooks3080

8 ай бұрын

Thank you. This is the dumbest GD video I’ve ever seen. Disassemble the whole dryer like this?!

you can save yourself loads off time just take out the vent tube at the back (one screw) and drop a light inside the machine so you can see what you can carefully replace the thermal fuse or temp sensor though the hole at the back , save too much time

How do you know if the thermal fuse is bad? Is there an EASY way to check before you completely disassemble the machine?

Is there any issue if i put fuse up side down .or can i put it anyway?

@Reanimator7336

Жыл бұрын

Its frustrating because I cant find that answer anywhere. If you know now please write back.

@cmissal

Жыл бұрын

I know. I’m use to the item having + or - . I didn’t document the orientation when I removed the old one and have no idea if the replacement is the same… only frame of reference is the orientation of writing on it, and that could be different between manufacturers

@harshbarj

Жыл бұрын

Fuses are virtually ALWAYS bidirectional. In this case it's likely passing AC current anyway, so it can't be sensitive to direction.

@oldschoolfrp2326

9 ай бұрын

No direction to the fuse, put either end up (same with the red & white wires - they can go on either pin). The exact same fuse without the bracket is used in other appliances like dishwashers, where it just pops into a 2-slot connector with no screws.

Is there a way to test rhe thermal fuse to see 1) is it bad and 2) sis rhe replacement work prior to putting thr while thing back together?

@oldschoolfrp2326

9 ай бұрын

Yes - Use a multimeter set to measure electrical resistance (Ohms, the Omega symbol). I dialed mine to “2K” and it worked fine. Hold the 2 probes to the fuse’s pins. A good thermal fuse at room temperature will measure “0” resistance because it is closed, completing the circuit. A blown fuse will measure “1” because the circuit is broken (the same number you’ll see if the probes are simply held apart).

If your cool down light stay on and you are not getting heat from your dryer

If there is a vital fuse in this dryer that will most likely need occasional replacement, why in the world did the designing engineers neglect to flip the healing element fuse assembly and create a removable plate in the side panel for easy access. So dumb!

What if our LG dryer has no power whatsoever? No lights, nothing powers up. I checked with a multimeter and I have 240 volts at the black & red wires of the main plug of the dryer.

@ChrisHarris-wu2wi

10 ай бұрын

I’m having the same issue, any luck?

@politicallyincorrectcow8514

10 ай бұрын

Open door spon the barrel w door open and then press power while door is open after spinning

@Srhodes0519

9 ай бұрын

So he had to reset the dryer belt in a zig zag formation without visually seeing it…so by touch??

@jonahballow3930

8 ай бұрын

Same here, what was the fix?

Worst design ever. Remove so much to get to the part, other brands, just remove the back.

@curtisbender7336 Thank you so much. That worked and was less than 30 minutes!!!! You the man!