Easy as pie! I l worked in warehouse and it’s intimidating at first but doing it 100 times a day will boost your confidence. Just practice and do not rush!!!!!

As a warehouse foreman, The best advice I can give is practice. If you’re not comfortable with operating-DONT BE SCARED TO ASK FOR HELP! Also, don’t be scared of your forklift! Where I work there’s a lot of guys that refuse to get certified because they’re not comfortable in driving which is due to not driving enough. It all comes with practice and getting used to operating. Lack of confidence is what makes mistakes. Also, when leveling out you forks, along with operation in general-USE YOUR HIGH BEAMS. I don’t care if it’s midday; sometimes the extra light it what you need. Sounds crazy but I use it to help me focus when I’m picking up difficult load. Being aware of where your load is situated and how your mast is tiled is key.

@Truth-Be-Told-USA

2 жыл бұрын

Agree that is true it is a circle scared because you need practice and not practicing because your scared.

@almostanengineer

2 жыл бұрын

I’m one of two section leaders in my place that have forklift certifications, and my opposite won’t drive the truck, she’s still scared. I keep explaining that the only way she will get more comfortable with operating is to actually operate.

@drewyetti

Жыл бұрын

Good advice as I've passed my forklift training and I still get nervous when using the forks to pick up items from high places.

@Dragon-Slay3r

6 ай бұрын

Thats the 7 seaguls flying really high while the rowing air joint Zues uses wing cover to kriss cross the front roof of the work place

Great tips! I have my fork certification exams (theoretical and practical) this week, wish me luck! Such a useful skillset to have on productions 🤞🤞

Been working with forklift for a while now Trust me this in the hardest thing to do leveling the fork

@AAronDaOper8r

Жыл бұрын

it's hard to do with an unstable load or a messed up stack of pallets. it takes experience

@procrastinator6902

Жыл бұрын

Yeah I pick up packs of lumber off a conveyor chain that have no pallet and it's impossible to see or tell what your forks are doing. Not only that but bc the stacks of wood aren't completely square, you have to hit the back end kind of hard to push them all level or your forks won't go all the way in and you leave a couple of boards behind. The problem with THAT is the roller chain...when you give them a good bump they'll go rolling back down the chain and make it impossible to reach and lift them. The only solution we've found is to bump and then immediately lift the pack of wood quickly before it can get away from you. It'd be nice if the chains locked or disengaged once the wood got to the end but for whatever reason, they don't. Bc trainees are often slow moving and reluctant to hit things, altho necessary, I've found it is very difficult to train a new forklift employee to properly do this job. Not to mention, this is a large closed cab 37,500 lb diesel powered lift, which can often be much more intimidating to operate than your more common open cab, 5,000 lb model.

I just started forklift today for the first time ever the controls are weird

@0:09, the problem isn't level forks. The problem is that the operator has his forks *under* instead of *in* the bottom pallet. @0:34 you can't use this as an example because you can't level the forks on a Raymond pallet stacker.

@MiltMichael99

2 жыл бұрын

Correct David, this is actually footage we took from the internet...not our yard or equipment!

Sometimes I look at the mast or the top of the load rest or the top of the load to see if it is level. The hardest is when you forks are way up high.

Good VIDEO,,, Good Explanation.. is common sense the Fork have to be level and straight,, Seen bunch of Fork lift drivers that supposely got their certification somewhere and been working already few week picking and unloading load every day and still struggle to try get to pick up a load and then dame the Pallets real bad.. but that supposed to happend when you were getting your certification but no live several weeks on the Jobs and some forklift drivers driving crazy and causing an accident,,,and later get FIRED,,

@Fivestarforklifttraining

Жыл бұрын

Exactly. Thanks Guzman!

Teaching without the handbrake on and both hands off the steering wheel crazy

At CP we beat the hell out of ours. Not purposely just not how you would expect to use it. For example: if we need to close a box car door, easy, just ram the side of the door with the forks at high speed. aside from using them roughly we also have a lot of extensions. picking up wheels or couplers.

Great video Thank you 🙏🏾

Why do some forklifts have dummy side shifts control levers. The forklifts that I drive at Menards don't have working side shifts.

@coachmilt9987

8 ай бұрын

Charles, I'm guessing that the side shift apparatus (that fits on the carriage) is not installed so that's why the lever doesn't work. The apparatus does impede your vision a bit though so maybe that's why it was removed...

I’ll give you an example of what happens if you forget to level your forks, you shiny a 1.5T pallet of water back in the high bay racking, 100” above your head, burst the sprinkler pipe, and destroy £200k+ of stock in the process 😑

@vikkiduffer680

6 ай бұрын

😂😅

@Unknown_Ooh

2 ай бұрын

I'm not even sticking around after causing an incident like that. I'm going straight to my car, back home, logging into indeed, applying for a few jobs, have some beers and then go to bed.

thank you

Wish they trained me like this

@Dragon-Slay3r

6 ай бұрын

Yeah I saw it this morning just thought let me run it as a L first because of the floating girl lying on her back with knee bent with icecream hair then a finger puppet grizzly type of species moves back away from it while I fill my gas with 45pound shell diesel

Thats to link it

Kapow! Its like the original Batman

no seat belt?

❤😷

Please mor videos like this

auto level should be a feature, pay me.

@coachmilt9987

8 ай бұрын

Haha...yes it should! Your cheque is in the mail...LOL

@nutson90

6 ай бұрын

It is on some 😉

@tom99pek

5 ай бұрын

Toyota says they can auto level it with a button on a joystick side, but I found out those buttons useless except being a fidget toy

تحياتي احلى ابوني واشتراك مني ليك

why did they laugh?😮

Let me be pretty vietnamese do it

The struggle

No hi viz in sight

@Fivestarforklifttraining

Жыл бұрын

Good eye Jim! Wearing a vest falls under Company Policy, and we don't deem it necessary as we are always operating in broad daylight.