Learn more about this and other hobby techniques during our hobby livestreams! Wednesdays at 4:30 PM and Sundays at 10:00 AM, all times Pacific!
Жүктеу.....
Пікірлер: 95
@CorporalTunnelАй бұрын
The red paint trick is a good idea. Hadn’t thought of that before.
@Will_Forge
Ай бұрын
I used to do this with Silicone grease when lining up new screw holes when I used to work as a tech repairing appliances. I sometimes had to use aluminum scrap to make replacement metal plate covers with tin snips when reconditioning a used machine as part of making it like new.
@dylanc.5345
Ай бұрын
I came here to say this. It seems so obvious now that I've seen it but would've never thoight of it on my own
@daedricderp754
Ай бұрын
It's what I use to help with magnets
@NightfallTH
9 күн бұрын
problem is, you still need to know the angle of how to drill
@scenczyk1429Ай бұрын
I really like the larger sword handle as well. Both of these are MASSIVE improvements to an already very good kit
@Luna-tc3xj
Ай бұрын
I mean I personally think the handles a little too big, though I haven't had the chance to go look at the stock model for the sword myself yet, so I'm not entirely sure how bad it is there. I just mean that, at least if I imagined the demon prince holding the sword in two hands it does look like Thier would still be way too much handle left over, but that might just be a personal preference thing
@scenczyk1429
Ай бұрын
@@Luna-tc3xj the stock model has a ridiculously small handle
@commmarine9547Ай бұрын
The idea was close, but wrong. You put the paint dot where you want the pin to go on the head. Before you drill, place the head with the wet paint dot on the neck. Now you got the correct location. If you do it the way shown in the clip, you can't tell when the neck and head is aligned because you got the head 1/2 inch in the air due to the pin preventing you from contacting head to neck.
@TheHobbyCollab
Ай бұрын
Great tip!
@johnboshoff4317Ай бұрын
Looks great, but you could've probably cut the one small horn so that it looks like it broke off in battle and then you could keep the shoulder spikes probably🤔
@TheHobbyCollab
Ай бұрын
Sounds like a fun idea to try!
@ironclad4451Ай бұрын
fantastic work
@TheBlackBrickStudiosАй бұрын
That part usage is perfect. The head looks like it was made for this model. Amazing work.
@egnaroelprupАй бұрын
Pretty neat, but i think it could go a bit further with a feral look, like swapping the hands out or something
@Frosty-kz4omАй бұрын
Better in every way
@VoiceOfTheEmperorАй бұрын
As someone who still has his old Imperial Guard/Astra Militarum army in his attic somewhere, I applaud you on this. Very impressive!
@DagglestoneАй бұрын
A few years back I got the finecast nurgle prince and the spellcrow jumppack and sculpted them together. It’s basically ready to paint but I shelved it because adhd or some crap
@Ragnarra
Ай бұрын
I feel that. I still have a large tyranid army when I only completed two smaller gaunts.
@Dagglestone
Ай бұрын
@@Ragnarra I’m actually just now getting around to finishing my orks I bought back in 5th edition 😬
@Its4MechyАй бұрын
Banger music choice and a fantastic conversion!
@lukedowan8608Ай бұрын
That's sick! You've just given me two ideas for future models of my own, thank you!
@TheHobbyCollab
Ай бұрын
Glad to hear it!
@user-sc4pe3hm2rАй бұрын
I think you should paint the green thing
@Sonof_DRN200410 күн бұрын
Looks perfect for Tzeentch
@7hird3yeАй бұрын
Beautiful kitbash! If you have any issues with metal you can get plastic rods which help with the melting process with plastic glue
@samuelsanders5755Ай бұрын
I’d love to see your take on the Deathwatch as well
@The_Iron_StorytellerАй бұрын
Looks very tzeechian and cool
@Link-ik4wwАй бұрын
That paint trick is phenomenal.
@nikot.9920Ай бұрын
Beautiful conversion 👏👏👏
@Kannon_ShotsАй бұрын
220€ kitbash (msrp)
@patrikmansuri94969 күн бұрын
heyy that looks really good
@GottSmokeАй бұрын
Good thinking on the brass rod i always just used paper clips works well 👍
@BOKNOKB7Ай бұрын
Mimicked the muscle well, very cool :D
@korniestpatchАй бұрын
Looks very nice
@Weeklong_SeagullАй бұрын
My demon Prince is a kit bash between the actual demon Prince mini and a mualer fiend head and lower arms for a four armed dragon dude
@docholiday4129Ай бұрын
I’ve always wondered how people kit bash models. It’s nice to see it done first hand
@someirishguy1662Ай бұрын
Did the same with a Nurgle Deamon prince with an Ogre head
@davidt7381Ай бұрын
It looks so good!
@kingamer93Ай бұрын
Good shit dude
@RedCapVII28 күн бұрын
That makes it look super 80s lmao
@RedaniaKnight-Elect26 күн бұрын
Better put the spare Mindstealer Sphyranx head.It's funnier that way.
@Gothead420Ай бұрын
Truly a superb conversion! 🤘😎
@shonklebonkle324Ай бұрын
Lovely.
@Lorn058Ай бұрын
Awesome!
@jamesflanagan7374Ай бұрын
It looks fantastic. I tried sculptor Vaseline on a whim and there isn’t a huge difference with regular Vaseline except it “wipes” a lot cleaner and “slides” less. More control less grease I guess. Amazing conversion
@alamb245
Ай бұрын
Try using Nivea cream!
@Duckhunter-doinyourmom69
Ай бұрын
What’s the Vaseline for? Does it soften the green stuff or something?
@devilsadvocate.Ай бұрын
Could we see the demon prince head and the wilder fiend head side by side for comparison?
@TheHobbyCollab
Ай бұрын
Sure. Any head preference?
@devilsadvocate.
Ай бұрын
@@TheHobbyCollab Not really, just the heads from the demon prince kit that you didn't like, so we can see the improvement.
@a_person_u_kn0w
Ай бұрын
@TheHobbyCollab what about the daemon prince head we see on the 40k model that has the 4 horns
@awdsaefАй бұрын
Nice conversion, but holy mother of god, 1mm rod, this head will stick to the torso even if everything else is long gone. :D
@thedoombroom5331Ай бұрын
i kitbashed like three of the original heads lol
@grumbo8634Ай бұрын
the jittering is giving me a panic attack
@schmitty920520 күн бұрын
Looks amazing. Gg
@Fireflash83Ай бұрын
My dude 😎 I a ahuge fan of make it better conversions rule of cool every time .why I ended up with a bunch of iron hands primaris 😂😂😂
@Sol_Invictus-vf1bl3 күн бұрын
It looks way too easy to misalign the head and neck tbh. Like, it's basically just a stylus at that point and not actually a guide rod
@MrAchsasАй бұрын
I guess this is where all the micro plastic comes from xD Just a joke yo
@TheLordofMetroidsАй бұрын
How many heads are in the Wilderfiend kit? Been thinking of getting one, when it gets fully released, and I have a Demon Prince to try this on. But I don't want to ruin the wilderfiend mini completely.
@TheHobbyCollab
24 күн бұрын
1 head, 2 mouths, 2 horns.
@902100101Ай бұрын
Huh, never heard of using petroleum jelly with green stuff. How does it work?
@TheHobbyCollab
24 күн бұрын
Hey sorry for the late reply. Petroleum jelly prevents the green stuff from sticking to your tools kind of like water. But unlike water, you dont have to keep rewetting your tools. Also, your tools glide more easily off the surface. It's hard to describe, its more of a "feel" type of thing.
@GeerladenladАй бұрын
Good tutorial and greenstuff work!👍 But I'm not a fan of that Wilderfiend especially it's head.
@shorelessskies19 күн бұрын
Why not glue the head flush? Is it just stronger with the rod or what?
@TheHobbyCollab
18 күн бұрын
Ehhhhhhh I answered this in another comment.
@Rob749sАй бұрын
Looks great. But why pin a plastic model kit? Plastic glue bonds better than super glue, and it's not heavy enough for support. Does it help with something else?
@TheHobbyCollab
24 күн бұрын
Good question! I did use a little plastic glue after the pin was in place, but that wasnt 100% needed. Also, the area where the two piece meet wasn't very flat, and would've required more sanding which may have changed the angle of the head which I wanted to avoid. There's a large gap under between the neck on the body and head, so if I used only plastic glue would've meant holding the pieces together for awhile until the glue fully set, and even then wouldnt have been as sturdy as pinning.
@reschke5Ай бұрын
I mean you could have just plastic glued the wilderfiend head on and then filled said gaps with green stuff and not have to do all the extra steps of pinning
@TheHobbyCollab
24 күн бұрын
To each their own.
@Elvings92Ай бұрын
Isn't plastic glue enough? Or is the head not plastic?
@TheHobbyCollab
Ай бұрын
Plastic glue would probably be enough if you let it set, but I felt the rod helped reinforce the connection since I started sculpting around the neck soon after.
@raymondharnack4160Ай бұрын
No need to brass rod with plastic, just use cement.
@ONiKiSUxNuLL838
Ай бұрын
this is why the gunpla and warhammer communities need to merge
@ChaseDaOrk3767Ай бұрын
If I may ask, why don't you like the original Daemon Prince heads?
@KjellEilertsen
Ай бұрын
Can't answer for anyone else but to me I think the stock options both look more dumb than menacing.
@ChaseDaOrk3767
Ай бұрын
@@KjellEilertsen How so?
@KjellEilertsen
Ай бұрын
@@ChaseDaOrk3767 Hard to put into words exactly why, they just look unintelligent but not feral. It's have to study up on why certain features gives us humans certain impressions, like big head and big eyes we associate with babies and therefore we don't consider it threatening but cute instead. The stock heads just look bad to me. If they are cool to you then all good, not trying to argue anyone should agree with me. :)
@TheHobbyCollab
24 күн бұрын
Maybe dislike is the wrong word. I feel like none quite fit what I wanted for my army. My army is Undivided, which rules out 4/5 heads. The one Undivided head provided just didnt feel monstrous enough to me.
@libertyfires3077Ай бұрын
I don't understand. Why don't you just build a wilderbeast? So much work - you could have just bought a different 3d printed model. I think you are missing the point of the Daemon Prince model and making it too darkoath. #JusticeforAvatar
@alexanderwetherell4779Ай бұрын
The what feind? Sir pronouce it correctly
@malyxxplays7949Ай бұрын
It doesnt look as good as the ones it came with
@namasbouer4075
Ай бұрын
It looks better
@lupuskonig9
Ай бұрын
@@namasbouer4075 Nah not really
@namasbouer4075
Ай бұрын
@@lupuskonig9 yeah it does. I am right, you are wrong
@nigeltownley7472
Ай бұрын
@@namasbouer4075 based
@TheBroGamer14082
Ай бұрын
@@namasbouer4075 you have no concept of opinions
@PKMNBreeder_RayАй бұрын
"Its never stated that Vultrumites have enchanced hearing." BROTHER in christ, is literally not one of Mark's weaknesses being his hearing? Im pretty Cecil literally made it a point to state he knew that
@DemoMan465Ай бұрын
Could have just used plastic glue for the same effect.
Пікірлер: 95
The red paint trick is a good idea. Hadn’t thought of that before.
@Will_Forge
Ай бұрын
I used to do this with Silicone grease when lining up new screw holes when I used to work as a tech repairing appliances. I sometimes had to use aluminum scrap to make replacement metal plate covers with tin snips when reconditioning a used machine as part of making it like new.
@dylanc.5345
Ай бұрын
I came here to say this. It seems so obvious now that I've seen it but would've never thoight of it on my own
@daedricderp754
Ай бұрын
It's what I use to help with magnets
@NightfallTH
9 күн бұрын
problem is, you still need to know the angle of how to drill
I really like the larger sword handle as well. Both of these are MASSIVE improvements to an already very good kit
@Luna-tc3xj
Ай бұрын
I mean I personally think the handles a little too big, though I haven't had the chance to go look at the stock model for the sword myself yet, so I'm not entirely sure how bad it is there. I just mean that, at least if I imagined the demon prince holding the sword in two hands it does look like Thier would still be way too much handle left over, but that might just be a personal preference thing
@scenczyk1429
Ай бұрын
@@Luna-tc3xj the stock model has a ridiculously small handle
The idea was close, but wrong. You put the paint dot where you want the pin to go on the head. Before you drill, place the head with the wet paint dot on the neck. Now you got the correct location. If you do it the way shown in the clip, you can't tell when the neck and head is aligned because you got the head 1/2 inch in the air due to the pin preventing you from contacting head to neck.
@TheHobbyCollab
Ай бұрын
Great tip!
Looks great, but you could've probably cut the one small horn so that it looks like it broke off in battle and then you could keep the shoulder spikes probably🤔
@TheHobbyCollab
Ай бұрын
Sounds like a fun idea to try!
fantastic work
That part usage is perfect. The head looks like it was made for this model. Amazing work.
Pretty neat, but i think it could go a bit further with a feral look, like swapping the hands out or something
Better in every way
As someone who still has his old Imperial Guard/Astra Militarum army in his attic somewhere, I applaud you on this. Very impressive!
A few years back I got the finecast nurgle prince and the spellcrow jumppack and sculpted them together. It’s basically ready to paint but I shelved it because adhd or some crap
@Ragnarra
Ай бұрын
I feel that. I still have a large tyranid army when I only completed two smaller gaunts.
@Dagglestone
Ай бұрын
@@Ragnarra I’m actually just now getting around to finishing my orks I bought back in 5th edition 😬
Banger music choice and a fantastic conversion!
That's sick! You've just given me two ideas for future models of my own, thank you!
@TheHobbyCollab
Ай бұрын
Glad to hear it!
I think you should paint the green thing
Looks perfect for Tzeentch
Beautiful kitbash! If you have any issues with metal you can get plastic rods which help with the melting process with plastic glue
I’d love to see your take on the Deathwatch as well
Looks very tzeechian and cool
That paint trick is phenomenal.
Beautiful conversion 👏👏👏
220€ kitbash (msrp)
heyy that looks really good
Good thinking on the brass rod i always just used paper clips works well 👍
Mimicked the muscle well, very cool :D
Looks very nice
My demon Prince is a kit bash between the actual demon Prince mini and a mualer fiend head and lower arms for a four armed dragon dude
I’ve always wondered how people kit bash models. It’s nice to see it done first hand
Did the same with a Nurgle Deamon prince with an Ogre head
It looks so good!
Good shit dude
That makes it look super 80s lmao
Better put the spare Mindstealer Sphyranx head.It's funnier that way.
Truly a superb conversion! 🤘😎
Lovely.
Awesome!
It looks fantastic. I tried sculptor Vaseline on a whim and there isn’t a huge difference with regular Vaseline except it “wipes” a lot cleaner and “slides” less. More control less grease I guess. Amazing conversion
@alamb245
Ай бұрын
Try using Nivea cream!
@Duckhunter-doinyourmom69
Ай бұрын
What’s the Vaseline for? Does it soften the green stuff or something?
Could we see the demon prince head and the wilder fiend head side by side for comparison?
@TheHobbyCollab
Ай бұрын
Sure. Any head preference?
@devilsadvocate.
Ай бұрын
@@TheHobbyCollab Not really, just the heads from the demon prince kit that you didn't like, so we can see the improvement.
@a_person_u_kn0w
Ай бұрын
@TheHobbyCollab what about the daemon prince head we see on the 40k model that has the 4 horns
Nice conversion, but holy mother of god, 1mm rod, this head will stick to the torso even if everything else is long gone. :D
i kitbashed like three of the original heads lol
the jittering is giving me a panic attack
Looks amazing. Gg
My dude 😎 I a ahuge fan of make it better conversions rule of cool every time .why I ended up with a bunch of iron hands primaris 😂😂😂
It looks way too easy to misalign the head and neck tbh. Like, it's basically just a stylus at that point and not actually a guide rod
I guess this is where all the micro plastic comes from xD Just a joke yo
How many heads are in the Wilderfiend kit? Been thinking of getting one, when it gets fully released, and I have a Demon Prince to try this on. But I don't want to ruin the wilderfiend mini completely.
@TheHobbyCollab
24 күн бұрын
1 head, 2 mouths, 2 horns.
Huh, never heard of using petroleum jelly with green stuff. How does it work?
@TheHobbyCollab
24 күн бұрын
Hey sorry for the late reply. Petroleum jelly prevents the green stuff from sticking to your tools kind of like water. But unlike water, you dont have to keep rewetting your tools. Also, your tools glide more easily off the surface. It's hard to describe, its more of a "feel" type of thing.
Good tutorial and greenstuff work!👍 But I'm not a fan of that Wilderfiend especially it's head.
Why not glue the head flush? Is it just stronger with the rod or what?
@TheHobbyCollab
18 күн бұрын
Ehhhhhhh I answered this in another comment.
Looks great. But why pin a plastic model kit? Plastic glue bonds better than super glue, and it's not heavy enough for support. Does it help with something else?
@TheHobbyCollab
24 күн бұрын
Good question! I did use a little plastic glue after the pin was in place, but that wasnt 100% needed. Also, the area where the two piece meet wasn't very flat, and would've required more sanding which may have changed the angle of the head which I wanted to avoid. There's a large gap under between the neck on the body and head, so if I used only plastic glue would've meant holding the pieces together for awhile until the glue fully set, and even then wouldnt have been as sturdy as pinning.
I mean you could have just plastic glued the wilderfiend head on and then filled said gaps with green stuff and not have to do all the extra steps of pinning
@TheHobbyCollab
24 күн бұрын
To each their own.
Isn't plastic glue enough? Or is the head not plastic?
@TheHobbyCollab
Ай бұрын
Plastic glue would probably be enough if you let it set, but I felt the rod helped reinforce the connection since I started sculpting around the neck soon after.
No need to brass rod with plastic, just use cement.
@ONiKiSUxNuLL838
Ай бұрын
this is why the gunpla and warhammer communities need to merge
If I may ask, why don't you like the original Daemon Prince heads?
@KjellEilertsen
Ай бұрын
Can't answer for anyone else but to me I think the stock options both look more dumb than menacing.
@ChaseDaOrk3767
Ай бұрын
@@KjellEilertsen How so?
@KjellEilertsen
Ай бұрын
@@ChaseDaOrk3767 Hard to put into words exactly why, they just look unintelligent but not feral. It's have to study up on why certain features gives us humans certain impressions, like big head and big eyes we associate with babies and therefore we don't consider it threatening but cute instead. The stock heads just look bad to me. If they are cool to you then all good, not trying to argue anyone should agree with me. :)
@TheHobbyCollab
24 күн бұрын
Maybe dislike is the wrong word. I feel like none quite fit what I wanted for my army. My army is Undivided, which rules out 4/5 heads. The one Undivided head provided just didnt feel monstrous enough to me.
I don't understand. Why don't you just build a wilderbeast? So much work - you could have just bought a different 3d printed model. I think you are missing the point of the Daemon Prince model and making it too darkoath. #JusticeforAvatar
The what feind? Sir pronouce it correctly
It doesnt look as good as the ones it came with
@namasbouer4075
Ай бұрын
It looks better
@lupuskonig9
Ай бұрын
@@namasbouer4075 Nah not really
@namasbouer4075
Ай бұрын
@@lupuskonig9 yeah it does. I am right, you are wrong
@nigeltownley7472
Ай бұрын
@@namasbouer4075 based
@TheBroGamer14082
Ай бұрын
@@namasbouer4075 you have no concept of opinions
"Its never stated that Vultrumites have enchanced hearing." BROTHER in christ, is literally not one of Mark's weaknesses being his hearing? Im pretty Cecil literally made it a point to state he knew that
Could have just used plastic glue for the same effect.
Sanding stick... u mean a fucking file?
@TheHobbyCollab
Ай бұрын
DBAD ☺️ amzn.to/3VnvHGD