Beautiful plane, IMO. The visibility you get out of the front windscreen is really good. Nice plane for sightseeing :)

Nice to fly when your feeling lazy. The updates to avionics made it very usable and relaxing plane to fly. Kinda cute too, how you get in if covered, best door animation in thd sim 😂

@A330Driver

Жыл бұрын

Absolutely!

As always a super informative video ,i like the vision jet will check it out this aft and look for sim brief import, going to ease the work load a bit, Thanks

@A330Driver

Жыл бұрын

Remember to install the Navigraph tool for the simbrief import, then it should work 👍🏼

Love this plane, great fun to just jump in and hop somewhere

thanks for the update and video

Well done, danke ! Just started to learn this aircraft. Your video makes it easier :)

@A330Driver

Жыл бұрын

Have fun! It's such a lovely plane!

Only flew this a couple of times after buying it, it’s ok especially with the updates. I still much prefer the Hondajet though, especially now it’s got an auto throttle.

The G3000 has a "pane" dial that lets you select which pane to control with the MFD. It's the dial at the top of the right hand side of the GTC.

@A330Driver

Жыл бұрын

Thanks, going to check that out for sure!

Lovely, thank you

Hi you can set the empty weight on the bottom of the Operating Weight Tab in weight and fuel (Set Empty Weight).

@kaibilder

Жыл бұрын

maybe the dev set the default value wrong or so...

Nice! I got it some time ago but never got around to flying it. Still hooked on the ATR. The fluctuating % thrust is a bit annoying. This can't be correct.

Super Mario cart ground physics like most MSFS aircraft! They need to rework this part of the game to bring some enjoyment and realism to it.

@A330Driver

Жыл бұрын

Yep, but we need to blame Asobo for that, not the aircraft Dev.

@iain8837

Жыл бұрын

@@A330Driver Correct, no blame on the aircraft developer, let’s hope for some improvements in the future from Asbo!

I have the Honda Jet. This is similar. Very fun to fly and the upgraded G3000 is impressive. Navigraph charts and SimBrief are not yet available in the Honda but will be soon.

@A330Driver

Жыл бұрын

Not even with the navigraph tool they released two weeks ago? I thought this added them for any plane using the G3000 and G5000 avionics.

@ArrRoh

11 ай бұрын

The HJet has been updated recently to include charts & simbrief integration. It’s awesome!

Nice - Guess the weight error is caused by changing interior config. There is a menu for config weight in center screen.

I love this flying iPad 😂❤

@A330Driver

Жыл бұрын

😂

This may be one of the easiest planes in FSIM to fly, right after the HJet. It flys kind of like a little fighter jet, albeit a really slow one. The wind does like to toss her around a little bit due to it being made out of carbon fibre and it seems this may be somewhat simulated in game. This and the HJet are probably the two planes I fly the most.

I notice a couple of things with your G3000 MFD - I too am missing mileage (distance) to next waypoint . . . I cant see a fix - I dont have the "Edit Data Fields " under Fl Plan Options - I know its avaialble I have seen many times. I also would always have the Synthetic Terrain on the PFD, must have in bad weather. PFD Settings SVT Terrain "Enable"

I really like this plane. Too bad they messed up the empty weight value in there, but it can be fixed easily, hopefully.

oh Lübeck 😍, its a nice plane.

@A330Driver

Жыл бұрын

Indeed it is!

Nice plane to fly

In your video, you mentioned about updating the Navigraph? How do you update the Navigraph? I tried to fly the approach for Kathmandu VNKT, however the list of approaches in Vision Jet's Garmin doesn't match with the published approach chart, hence my Navigraph needs to be updated. Thanks.

After entering my minimums I never hear a callout when I’m at minimums in this jet. Do you folks know if there is a setting that needs to be enabled or if it’s a bug?

How can you get in the plane when the cover is on. They should be an exterior click point to remove the cover.

@A330Driver

Жыл бұрын

That's would certainly be useful!

@Cessna172SNavIII

Жыл бұрын

Toggle clipping

Such a weird little thing this plane haha

After this review, I decided to try it out. Yes, the avionics are very nice, although I found the handling of the displays a bit complicated at first. But when taking off at this first flight, accelerating down the runway, the plane all of a sudden did a jump into the air, pitching up 20° or more, stalled and crashed onto the runway, all within one second or two. I believe I had everything set correctly, center of gravity and trim, and handled the controls smoothly. Even if not, this is beyond explanation. Did that happen to anybody else? Update: I found the issue. Only happens at EDDN, and only with this plane.

@A330Driver

11 ай бұрын

The avionics need a little time to get used to and then I find them quite intuitive. Never heard of that issue you mentioned in the vision jet. Does it happen with other aircraft as well at this airport?

Barf bag status achieved. It bounces all over the place.

@A330Driver

Жыл бұрын

lol

I don't normally fly jets but the FFX Vision Jet has converted me. One of the very best pieces of payware in this size and category for MSFS. Not sure what is happening with your speed display on the PFD. I fly in VR and don't see this speedy behaviour moving up and down so quickly, it's a lot more natural. I wonder if the G3000's are affected by using Frame Generation mode.. The checklist showed twice at 24:19 as you already had it open on the left side but didn't split the window before opening it again in the right window, which showed the map. Your video is good but your errors make it look like the aircraft has bugs, which isn't true. At least, on the 30 flights I have done, I haven't noticed anything incorrect yet.

Weird issue - the lower screens are all black ?? Just downloaded from Marketplace MSFS. Cant light them up / turn on ? regards

@A330Driver

11 ай бұрын

I haven't seen that one yet. But make sure to join their discord and I'm sure they can find a solution for you.

@marcw.5492

10 ай бұрын

I emailed the develpers - Had to delete all of the WORKING TILE folder downloads - I guess the G3000 was the issue. Fixed it@@A330Driver

„the papis are way off“ is a traditional sentence on this channel

@A330Driver

Жыл бұрын

Sooooo true 😂

Hey, how can I get the Beta of the 787? Sorry for the off-topic

@DeEchteZeus

Жыл бұрын

it should be on the steam settings, click on properties and betas

@learjet55c

Жыл бұрын

@@DeEchteZeus I only use the Windows Application. Is there a solution for it? thanks anyways

@DeEchteZeus

Жыл бұрын

@@learjet55c kzread.info/dash/bejne/hGWZ1Mdyfa3Ikbg.html

I suffer from high stall speed, how can I change this?

@A330Driver

11 ай бұрын

Reduce weight or G loading.

@fadi8396

11 ай бұрын

What do you mean by G?

Second

Fun to fly. But it flies low, slow and has no range worth mentioning.

@A330Driver

Жыл бұрын

FL310, 310KT, 950NM. Not all that bad if you ask me 😄

In X-Plane default Vision Jet is much better in every way.

@A330Driver

7 ай бұрын

Would you also explain what exactly it is that is better? I can’t sign on “in every way” from the simple point that graphics are a ton better on this one than on the xpl version.

@alexmaster4662

7 ай бұрын

@@A330Driver, good morning. I have both an RTX3060 video card and an Intel i5 10100 processor. In X-Plane 12, my graphics are better than in MSFS 2020. I feel more comfortable flying the Vision Jet in X-Plane 12. Everything is relative. Thank you. I'm subscribing.

it looks quite lovely, it just has the major issue of being a vision jet instead of something actually interesting

@A330Driver

Жыл бұрын

hahaha, sure enough it would be more interesting if it was a Global or an G750, but a vision jet is nice as well ;-)

First