hey man...any chance you still have the cnc plans?

I can watch such videos for hours. I don't know why :)

Mark, thank you for the updated contact information if a little late😊. I was able to find some cnc files and have completed two Les Paul guitars for my son and myself with some help by a friend with a cnc machine. Good luck with your side business and I know there is a lot of work in putting these files together.

@splishsplash2150

2 жыл бұрын

Hey, me and my dad are looking at making a les Paul, it will be our first guitar. Anyways, I was wondering if you could let me know where you got your files and what they are priced at? I’ve looked and haven’t found much that I like yet

@jamesmerideth6305

2 жыл бұрын

@@splishsplash2150 i had a friend with a ShopSabre cnc machine and they provided the cnc files to him without cost. If you don’t have the ShopSabre machine, then I can’t help you. Sorry about that.

Can you share the files used to Cnc this guitar?

wonderful.....i want one...i wonder what the cheapest kit is that will give me these basic functions... 3 axis is it. the bost basic for cutting out bodies ?

Hi, I know that's an old video but would like to ask anyway... How did you hold the guitar on the machine table? Thanks in advance

Very, very nice job! It never occurred to me to cut the wire channel, glue up, and then do the rest as one piece, but with CNC it makes perfect sense. Looking forward to the finished product.

@malakaideangelo6316

2 жыл бұрын

Sorry to be so offtopic but does anybody know a method to get back into an instagram account..? I was stupid forgot my account password. I appreciate any assistance you can offer me.

@huxleyaydin6562

2 жыл бұрын

@Malakai Deangelo instablaster ;)

@malakaideangelo6316

2 жыл бұрын

@Huxley Aydin thanks so much for your reply. I got to the site on google and I'm trying it out now. Takes quite some time so I will get back to you later with my results.

@malakaideangelo6316

2 жыл бұрын

@Huxley Aydin It did the trick and I now got access to my account again. I'm so happy:D Thank you so much you really help me out !

@luisownerbr

2 жыл бұрын

Lol that's how they're made, but yeah, first time I saw it I was mindblown too.

Hi, what software do you use to generate the cutting paths? Is it not possible to generate a ramp cutting path for the neck pocket without using the jig?

Very impressive, where did you get the file for the body, it is the rise and fall of the body that I am finding a challenge. Any guidance would be appreciated.

Cnc makes life sooooooooo much easier

very nice make me one .)

What CNC machine are you using do you private build

I'm just getting into researching cnc builds. I'm interested in building 59 spec'd les paul build, with roasted woods. Where would I get the appropriate file for the build?

im building a cnc router,im gathering info to best suit my needs,can you give me dimentions of the machine in the video,outside sizes and cutting bed area,soft ware used is it good for a newbie to cnc,modeling and transfer to solid product cost. Can you cut a neck through guitar on this bed,i've considered a1500mm x 600mm bed area,but i may just go for 1000mm x600mm,not sure yet. I,d appreciate the info as it will help me evaluate the best trade offs ,

Hey Great Work. I'm very new to Guitar world, but my GF is obsessed with Les Paul 59 guitar. She have anniversary in September and I want to surprise her. Do you know if 3d drawings are aveilable, so try to make it for her?

Did you machine the pickup pockets at the same angle as the neck mortise? Also, when machining the control cavity in part 2 I saw that you cut through the bottom of the mahogany into the maple.. was that the 7degree angle found on 59 Les Pauls or was it just a flat pocket?

@Seitz333

8 жыл бұрын

+SwiftyJ Yes the pickup pockets were machined at the same angle as the neck, I used 4.2deg. From all of the info I have found the 7deg angle for the control cavity was found on 59 Les Pauls. Most all of my dimensions were taken from the Bartlett plans. I have been having problems getting the neck machined right, reason for the long delay in a new video. I have already cut about 10 test necks. Everything is cutting correct except the transition from the neck to headstock on the back of the neck. Going to try and build a new jig this weekend and hopefully try another test neck next weekend... Thanks!

@swiftyj6413

8 жыл бұрын

+Seitz333 I plan to CNC a complete Les Paul within the near future. I was planning to create separate jigs to machine the angles for the pickup pockets and control cavity, but I may have a rethink after watching your videos. I have been playing around with toolpaths on the neck in HSMWorks and seem to have fairly good results from the simulation of machining it provides. Whether or not this will translate well to the actual work piece is yet to be discovered. From youtube results it doesn't look like many people have tried CNC'ing complete necks with a angled headstock..

@steveh365

6 жыл бұрын

Are you using a standard 2 flute carbide end mill for the neck pocket? With the 4.2 degree angle, does this work ok with std end mill..? I just ordered a new 6012 machine. What are your favorite end mills to use..? carbide.? 2 flute best for woods..? I am new to this game... Thanks

where can i get the file? I'm starting with my cnc and it would be very helpful, thanks!

High Mark, what CNC Machine model and software you are using please and is the company UK based/ US ? Thank you

Straight off the CNC it's beautiful. After sanding......gosh!

have you got the cad files for this, i am building a les paul as my yr12 major project and my school uses crap 3D modeling software which make it impossible for me to design my own thanks

Is it possible to get the cad files for this build?

Jeez I hate cnc guitars. (Can we see some more?) seriously, that was cool, nice work!

as Les Pauls come with binding why would you not let the CNC do the routing for it?

@Seitz333

8 жыл бұрын

+michael bourne I may give that a try on the next one!

Is this file available to purchase ?

@mattsta1964

6 жыл бұрын

Contact me if you want 3D CAD models of a Les Paul.

@1Robbie75

6 жыл бұрын

Ye Olde Sausage Machine Please send me a quote to my address roberto.amadori@gmail.com

@steveh365

6 жыл бұрын

YE Old... What is your email address..? interested in 59 Les Paul cad files.. steveguitar365@charter.net

@JoaoGodinho69

5 жыл бұрын

Hello there Ye Olde Sausage Machine, can you sent me the 3D Cad models of a 59 Les Paul please?? rafael.p.godinho@hotmail.com thanks a lot!!!

@biss4483

5 жыл бұрын

@@mattsta1964 sent to me plz guibis12@icloud.com

Hi there!, do you have a file for this Les Paul Build for sell or share with me??....Please contac to me soon.

do you have an email address so I can ask you some questions?

Not guitar building it’s computer programming