Join me as I overview and install the Spigen GLAStR EZ fit optik pro lens protectors!
Жүктеу.....
Пікірлер: 44
@ATREY1785 ай бұрын
I have this on my S23 Ultra with Spigen Tought Armor case and UAG Monarch case and both fit perfectly. Especialy with Spigen T.A. case, lenses are protectet realy excelent. With UAG protection is little less, but still very well.
@shubhankar_sharma11 ай бұрын
Still no issues with Af and quality hopefully? Ordered these today :)
@fahminagi53979 ай бұрын
Doe's it work perfect with the CaseBorne V Designed for Samsung Galaxy S23 Ultra Case ?
@BIGHELLONE4 ай бұрын
I followed your tutorial but I doubt whether the films have adhered to the lenses: how can I check this since I put them on as soon as I unpacked the smartphone?
@musaabahmed239810 ай бұрын
When i put an esr version of the lens protector it seemed to have fogged up. I also recently ordered one of these so i was wondering how to avoid the fog up of the lens. Ilany suggestions?
@SanjayChadha3 ай бұрын
Hey mate, do the protectors actually stick on the camera lens itself is the lens frame, my worry is that if I buy these and need to remove them the actual lens doesn't get damaged with glue - thanks
@HayatiVlog718 ай бұрын
Samsung 👍👍👍
@ksf972911 ай бұрын
Can you remove them?
@M.Begamy Жыл бұрын
Thanks for this !
@Zaknaberrnon
Жыл бұрын
Thanks! I'm glad it was helpful! :)
@TermiGaming9 ай бұрын
how is it so far bro any problem , ? link please
@Zaney123410 ай бұрын
Btw how do you get that phone😭😭😭
@ELCHIVERO2012 Жыл бұрын
i just wondering if the protector is covering the microphone that has under or below de first top to bottom camera"!
@Zaknaberrnon
Жыл бұрын
Hi there! No, it's not covering the mic. That's because the protectors don't go all the way down against the glass, they leave a very slight exposed portion at the bottom which allows for that. I have had no issues with my mic when recording videos so far :)
@fahminagi53979 ай бұрын
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
@sysrqstoic
8 ай бұрын
The protector is Spigen so 100% sure it would fit Spigen cases
@TheProgear Жыл бұрын
Does it affect picture quality when using the flash?
@Zaknaberrnon
11 ай бұрын
Hi, thanks for watching! Not that I've noticed :)
@BladeMasterLegend Жыл бұрын
Hello, how does autofocus work, especially the transition between lit and dark areas with these protectors installed? I read a review somewhere it ruins autofocus.
@Zaknaberrnon
Жыл бұрын
Hi there, thanks for watching!! I haven't personally noticed any difference in autofocus before vs after putting the protectors on, though to be fair I put the protectors on the phone a few days after buying the phone so maybe I didn't have time to get used to the "normal" autofocus? I still have the protectors on and haven't had any issues with the camera or with the focus. That's just my experience though of course :)
@BladeMasterLegend
Жыл бұрын
@@Zaknaberrnon That was a quick reply! Thank you for sharing your experience and the video. I'll go ahead and subscribe; best success to your channel! :)
@Ricardo49143
11 ай бұрын
Did you get some dust inside after few days?
@BladeMasterLegend
11 ай бұрын
@@Ricardo49143 What the.. Receiving your message was a massive coincidence. Very odd. It wasn't after few days, I've had lense protectors for about 2 months now. And I don't know exactly when this happened. I know that when I first applied the lenses, there were absolutely nothing in between camera and lenses. I made sure to confirm this. Literally yesterday, while I was in work and just inspecting my phone's cameras, I noticed there were two dust particles stuck each dust in each telephoto camera. (The bottom big and bottom smaller one). I don't know how dust got inside protectors.
@Ricardo49143
10 ай бұрын
@@BladeMasterLegend Same thing happened to me, I don't have idea how the dust get inside.
@alexgreco748 Жыл бұрын
"Nice the Spiegen provides two sets." Like you're not paying for the extra 3 cents XD XD XD 😄
@DavidsonBraga10 ай бұрын
Dude, are the edges of the lens plastic or metal? I'm wondering if when fitting the lens, if it's metal, it can scratch the edges of the cameras that are made of aluminum.
@PulkitMehrotrapm556
9 ай бұрын
Exactly my question.
@AkashJ-bw2cn6 ай бұрын
Just installed it and there are no issues in image quality or AF
@viijan28
5 ай бұрын
Same buddy
@starsailorind0410 ай бұрын
But while removing the cover the lens protector also gets removed
@burnsalad
8 ай бұрын
are you sure? I thought the same thing until I double checked.
@Henry1981live Жыл бұрын
Have you tried with a spigen thin fit case? Does still fit?
@Zaknaberrnon
Жыл бұрын
Hi there, thanks for watching! I don't know about a spigen thin fit specifically, but I do own a clear spigen case and it fits perfectly. In theory Spigen claims that these lens protectors are compatible with all their cases.
@Henry1981live
Жыл бұрын
Waiting for my cases
@ShellShokerPT
Жыл бұрын
i read it on amazon that it should fit any spigen cases, as i also bought one of their cases and i went with this protector, lets hope it works
@Henry1981live
Жыл бұрын
@@ShellShokerPT hopefully
@fahminagi5397
9 ай бұрын
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
@TheDarbanville Жыл бұрын
Does it affect photo quality anyhow?
@Zaknaberrnon
Жыл бұрын
Not that I've noticed!
@zenpai_ian93349 ай бұрын
Don't buy that it is going to break easily better use case with slider cover for camera
@Runescape.5 ай бұрын
why was your hands shaking so much, are you on medication?
Пікірлер: 44
I have this on my S23 Ultra with Spigen Tought Armor case and UAG Monarch case and both fit perfectly. Especialy with Spigen T.A. case, lenses are protectet realy excelent. With UAG protection is little less, but still very well.
Still no issues with Af and quality hopefully? Ordered these today :)
Doe's it work perfect with the CaseBorne V Designed for Samsung Galaxy S23 Ultra Case ?
I followed your tutorial but I doubt whether the films have adhered to the lenses: how can I check this since I put them on as soon as I unpacked the smartphone?
When i put an esr version of the lens protector it seemed to have fogged up. I also recently ordered one of these so i was wondering how to avoid the fog up of the lens. Ilany suggestions?
Hey mate, do the protectors actually stick on the camera lens itself is the lens frame, my worry is that if I buy these and need to remove them the actual lens doesn't get damaged with glue - thanks
Samsung 👍👍👍
Can you remove them?
Thanks for this !
@Zaknaberrnon
Жыл бұрын
Thanks! I'm glad it was helpful! :)
how is it so far bro any problem , ? link please
Btw how do you get that phone😭😭😭
i just wondering if the protector is covering the microphone that has under or below de first top to bottom camera"!
@Zaknaberrnon
Жыл бұрын
Hi there! No, it's not covering the mic. That's because the protectors don't go all the way down against the glass, they leave a very slight exposed portion at the bottom which allows for that. I have had no issues with my mic when recording videos so far :)
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
@sysrqstoic
8 ай бұрын
The protector is Spigen so 100% sure it would fit Spigen cases
Does it affect picture quality when using the flash?
@Zaknaberrnon
11 ай бұрын
Hi, thanks for watching! Not that I've noticed :)
Hello, how does autofocus work, especially the transition between lit and dark areas with these protectors installed? I read a review somewhere it ruins autofocus.
@Zaknaberrnon
Жыл бұрын
Hi there, thanks for watching!! I haven't personally noticed any difference in autofocus before vs after putting the protectors on, though to be fair I put the protectors on the phone a few days after buying the phone so maybe I didn't have time to get used to the "normal" autofocus? I still have the protectors on and haven't had any issues with the camera or with the focus. That's just my experience though of course :)
@BladeMasterLegend
Жыл бұрын
@@Zaknaberrnon That was a quick reply! Thank you for sharing your experience and the video. I'll go ahead and subscribe; best success to your channel! :)
@Ricardo49143
11 ай бұрын
Did you get some dust inside after few days?
@BladeMasterLegend
11 ай бұрын
@@Ricardo49143 What the.. Receiving your message was a massive coincidence. Very odd. It wasn't after few days, I've had lense protectors for about 2 months now. And I don't know exactly when this happened. I know that when I first applied the lenses, there were absolutely nothing in between camera and lenses. I made sure to confirm this. Literally yesterday, while I was in work and just inspecting my phone's cameras, I noticed there were two dust particles stuck each dust in each telephoto camera. (The bottom big and bottom smaller one). I don't know how dust got inside protectors.
@Ricardo49143
10 ай бұрын
@@BladeMasterLegend Same thing happened to me, I don't have idea how the dust get inside.
"Nice the Spiegen provides two sets." Like you're not paying for the extra 3 cents XD XD XD 😄
Dude, are the edges of the lens plastic or metal? I'm wondering if when fitting the lens, if it's metal, it can scratch the edges of the cameras that are made of aluminum.
@PulkitMehrotrapm556
9 ай бұрын
Exactly my question.
Just installed it and there are no issues in image quality or AF
@viijan28
5 ай бұрын
Same buddy
But while removing the cover the lens protector also gets removed
@burnsalad
8 ай бұрын
are you sure? I thought the same thing until I double checked.
Have you tried with a spigen thin fit case? Does still fit?
@Zaknaberrnon
Жыл бұрын
Hi there, thanks for watching! I don't know about a spigen thin fit specifically, but I do own a clear spigen case and it fits perfectly. In theory Spigen claims that these lens protectors are compatible with all their cases.
@Henry1981live
Жыл бұрын
Waiting for my cases
@ShellShokerPT
Жыл бұрын
i read it on amazon that it should fit any spigen cases, as i also bought one of their cases and i went with this protector, lets hope it works
@Henry1981live
Жыл бұрын
@@ShellShokerPT hopefully
@fahminagi5397
9 ай бұрын
Doe's it fit perfect in the Spigen Tough Armor Designed case ?
Does it affect photo quality anyhow?
@Zaknaberrnon
Жыл бұрын
Not that I've noticed!
Don't buy that it is going to break easily better use case with slider cover for camera
why was your hands shaking so much, are you on medication?
Awiwgsldosjd