Legrand Motion Sensor Light Switch Programming and Setup Instructions
In this video, I’ll show you how to program, set up, and adjust the settings for the Legrand (Pass & Seymour) RRW600U and/or RRW600UTC motion sensor light switch.
The good news is, there’s only one button you need to worry about. The bad news is, if you don’t have the instructions and understand how long you have to push that button and hold it down, you’ll be totally lost. So, hopefully, I’ll be able to guide you through it in this video.
Instruction Manual: pdf.lowes.com/p...
Amazon Link: amzn.to/3kDtjZZ
0:00 - Intro
0:28 - Enter programming for time delay settings
0:56 - Adjusting the time delay settings (30 seconds, 5 minutes, 10 minutes, 15 minutes or 30 minutes)
1:51 - Exit programming for time delay settings
2:07 - The difference between occupancy mode and vacancy mode
2:33 - Enter programming for occupancy and vacancy mode
2:52 - Switching between occupancy and vacancy mode
3:08 - Exit programming for occupancy and vacancy mode
3:30 - Enable or Disable the Status LED Light
Пікірлер: 66
Thank you!!! Just moved into a new house, and this was driving my whole family crazy!!!! YOU ROCK!!
Oh my gosh!! Thank you SO SO SOOO much! Lol! I just moved into my new apartment and this bathroom light was driving me insane! I'd be in the shower in the dark after 45 seconds! Your my hero! Lol! Merry ⛄🎄 and Happy New Year 🎉🥳
@sethwilliams43
2 жыл бұрын
YES! I'm so glad it helped!
@Nuclearvolt0807
4 ай бұрын
Literally the most relatable comment I've ever read in my life lmao
Bless you, brotha! The builder had my switch set to timeout in 30 seconds. Annoying AF until I followed your instructions. Thank you.
@sethwilliams43
8 ай бұрын
Amazing! I'm glad it helped you!
@pedroguerrero8042
2 ай бұрын
@@sethwilliams43how do set this to manual mode? For it to turn on and off when you press on it?
Thank you so much! My garage light in new house had this set to go off after the shortest setting and was driving me nuts!
Thank you so much, I have been trying to fix this issue for 2 years now but there were no videos out there. It drove me crazy!! You are heaven sent. It works and I’m at peace now!!!
@sethwilliams43
2 жыл бұрын
Amazing! I'm so glad to hear that! Thanks for watching.
Thanks for the video. My manager was getting annoyed when her lights will turn off automatically every few minutes. This should be very useful and I'll try these methods out.
Thank you so much, I called the builder but he never came, so this video was very useful, and it fixed my problems!
You are a life saver. OMG. My Legrand switches were driving me crazy.
@sethwilliams43
8 ай бұрын
Yes!!
Thank you soooooo much! Just moved into a home with a bunch of these and none of them made sense! Turning off randomly, some detecting motion, others not....thank you for clearing this all up :-)
@sethwilliams43
Жыл бұрын
Happy to help! Thanks for watching!
I can’t get my switches into occupied mode. 😊
@igobythisname
11 ай бұрын
Same here. No problem with programming Time Delay but cannot get it into Working Mode setting, it’s driving me nuts
Worked exactly as described! Awesome video!
Thank you!
Outstanding work! I posted instruction like that but yours is 3x better!
@sethwilliams43
9 ай бұрын
Thanks so much for the kind words! I appreciate that!
This is a life saver!! Thank you
Thank you thank you x100000000 scholar and a gentleman
this video saved me from just moving out of my apartment 💀🤣
How do you keep the light perminit on? Keeps turning off.
Changing occupancy/vacancy mdoe at 15 seconds doesnt work for me. I see the second five quick blinks at the 20-22 second mark not at the 15. And when i see that it doesnt enter the programming mode. Is this a wiring fail?
@kpcdabz
Жыл бұрын
Having the same problem, trying to find a solution.
@redd1th
Жыл бұрын
No, you likely have the version where it's vacancy sensor only, meaning you have to manually switch it on and then a sensor will stop the light from turning off if it senses motion. It looks identical to the version in this video but it's not actually the same because it doesn't have occupancy mode.
For those who have a (jack&jill) bathroom or you have 2 switches located near either door or more than 1 switch in a room, you must set both switches to the same setting for it to work if not the switches will default to the lowest time parameters i.e the switch that is timed for 30 seconds will shut off the lights at 30 seconds or if one switch is set for 5 min and the other switch is set for 15 min the 5 min switch will shut off the lights ..........good luck you guys
Perfect. Thank you.
Awesome advice. Thank you!
Accidentally threw away my instructions so, thanks for this! Is there a way to put this switch into manual off/on?
thank you
@sethwilliams43
Жыл бұрын
You're welcome!
Great video, but have you encountered an inability to change the occupancy mode setting? New house, several of these installed, and only on like 2 of them have I been able to change the occupancy mode, the rest will enter the time change mode without issue, but then nothing, if you continue to hold it’ll eventually just exit out of the time setting mode (like 20 seconds of holding the button), or if I just time for around 15 seconds then release it doesn’t enter any mode setting whatsoever. It’ll only flash the lights when entering or exiting the time setting mode, at no other point will it flash while holding, I’ve tried it on a few fixtures and several dozen attempts. Everything else works fine on all of them, just about 3/4 I can’t enter the ability to change the occupancy mode on them; even got so desperate I removed the entire face to see if it was a diff model with those little timer wheels, but nope, it’s this same model.
@prashantmalani823
2 жыл бұрын
Same here. Can only change the time delay, but the vacancy mode instructions don't work.
@noshockadvised
Жыл бұрын
FINALLY FIGURED IT OUT. Also in a new build home and I think they did this to save money (maybe?). Visually it's impossible to tell the difference, but what we likely have a VACANCY sensor switch and not an OCCUPANCY sensor switch. The vacancy one focuses on turning off after you leave. the occupancy one turns on when you enter... and also turns off when you leave. That's why none of our switches have the occupancy sensor setting when you hold down the button for 15 - it doesn't exist.
@redd1th
Жыл бұрын
@@noshockadvised confirming this, also in a new build, it's the ones with vacancy mode only, not occupancy mode. I checked with my builder and he confirmed the model #.
Thank you so much Helped me a lot
Can I adjust the sensitivity of the sensor? It seams like I have to go to far into the room before it turns on.
Super helpful thank you
@sethwilliams43
8 ай бұрын
You're welcome!
I want the light on old school turn off when you want and turn on when you want. Old school. How do you program old school?????thanks
Thank you Seth!!
@sethwilliams43
Жыл бұрын
You're welcome!
Thank you very much!
@sethwilliams43
8 ай бұрын
Thanks for watching!
How do I program it to only turn on and off when I want to turn it off and on? It comes on during the night when the heater turns on :(
@leonid4780
4 ай бұрын
Could you replace it with a regular switch? It costs around $1😄
@rebeccagonzalez7352
4 ай бұрын
Yea I thinking of doing that or I think you can disable that part
Worked. Thank you.
Having a problem with it working with a mechanical 3 way switch. Tech support couldn’t help with the issue. It is wired correctly and tried a second motion switch and still does not work correctly.
Your a Star.
Thank you so much!!!
@sethwilliams43
6 ай бұрын
You bet!
Thanks
Thaaaaaankkk!!! Youuuuuuuuuuu!!!!!!
I connected as a 3 way switch and have not found a way to turn on / off manually, without having to walk to the other switch to turn it on / off. Best if installed as a single pole in my case. Comments welcome.
My sensor is not working properly I try to do the vacancy mode and when I hold for 15 second the light starts to flash at 10 second 😫
How to permanently disable one light
Does this pick up motion from a fan?
@sethwilliams43
Жыл бұрын
I suppose it's possible. I haven't tested it, but if the fan is within range of the sensor, I could see it triggering the light.
Holding the button for 15 seconds doesn’t work for me, it won’t enter the second programming mode no matter what i do
@chiuChi567
16 күн бұрын
I discovered that you have to hold it for more like 25 seconds, not 15. I couldn’t get it to switch back to occupancy and it was driving me nuts because my neighbor has the same lights and his worked like this video. Mine wouldn’t work until I decided to keep holding it down, the manual is wrong, maybe it’s a defective set..
@maronielbethishou5912
16 күн бұрын
@@chiuChi567 I’ll have to try 25 seconds but I’m pretty sure the switch is defective