LEGO Technic 6x6 Extreme Offroader | 6 BuWizz Motors!
Автокөліктер мен көлік құралдары
Ever since I saw @hlieb061 's 6x6 conversion of the set 42099 ( • Lego technic extreme o... ) I instantly knew I had to build one myself :)
Instructions and Eurobricks topic will be made soon!
-6x BuWizz motors for drive
-2x C+ L Motors for 4 Wheel Steering
-2x BuWizz 2.0 units and 1x BuWIzz 3.0 unit for power & control
-Controlled with BC2 with a game controller and a smartphone
-Fully independent Double Wishbone suspension with a pushrod mechanism with friction dampers
-Bodywork designed to resemble the original 42099 set
-Filming location: Sierra de las Nieves (Ronda, Spain)
-Buy BuWizz: buwizz.com/-Book your place in the BuWizz Gathering 2024!: buwizz.com/buwizz-gathering-2...
-Song: • Iron Maiden - The Troo...
-My game controller: Gamesir x2
#buwizz #lego #legotechnic #trophytruck #rc #offroad #prerunner #offroader #technology #rc #monstertruck #unimog #6x6 #suspension #trialtruck #blur #song2 #pickup #basher #arrma #traxxas #trialtruck #whitestripes #expeditiontruck #dakar #dakar2024 #rally#rallyraid #remake #4x4 #gearbox
Пікірлер: 22
Lookin gud mah man ! from WBM with love ❤
@Anotherbrickintheworld
21 күн бұрын
Thank you for the support!
Just AWESOME
@Anotherbrickintheworld
21 күн бұрын
Thank you!
Hats off to you, this looks fantastic, it's a must-build! I'm thinking about using 3x BuWizz 3.0 Pros.
@Anotherbrickintheworld
26 күн бұрын
Thanks! I will relase instructions soon, so you'll be able to build it. I haven't tried it with 3 BuWizz 3.0, but it should be staright-foward to do the conversion.
@gergoszabo8656
26 күн бұрын
@@Anotherbrickintheworld Credit where credit’s due! Out of curiosity, what software do you use to build the instructions and how do you go about it? I’m trying to create step-by-step instructions for a model designed and built by somebody else - haven’t had much success so far…
@Anotherbrickintheworld
21 күн бұрын
@@gergoszabo8656Thanks! For the instructions I use Bricklink Studio. It's easy and straight-forward to use, and it has the added benefit of almost auto-generated instructions. You can download it here: www.bricklink.com/v3/studio/download.page
Awesome model! How does it compare to your Monster Pickup in terms of performance (since they have a very similar chassis)? Looks like they're similar in performance.
@Anotherbrickintheworld
Ай бұрын
Thank you for your comment! About the performance, it's comparable to the monster pickup's one, though it has a few upgrades. It's more stable, as it's a 6x6, has a better power-to-weight ratio, faster steering response with a tighter steering radius, double the suspension travel and some redesigned axles to be even tougher.
Awesome model, I like concept of 6x6 drive. You use fast or slow output of BW motor?
@Anotherbrickintheworld
Ай бұрын
Thanks! I used the slower output of the BuWizz motors, with the same axle design as the Monster Pickup ( kzread.info/dash/bejne/Y65hy8aIqr3Qo5M.html )
It’s wonderful vehicle~! I have a question about auto calibration of servo motor setting. When I use PU L motor for steering with BC2 for iOS and BuWizz 3.0, auto calibration button in BC2 is not activated. So, I have some problem center steering. How do you solve this problem?
@Anotherbrickintheworld
14 күн бұрын
Thank you! For the steering callibration, I'm afraid I can't really you help here, as I run it at android and don't have an iOS device to test it. It otherwise doesn't work very well, I'd just recommend for you to set mecanically the steering perpendicular to the chassis like a lego PF servo as PU L motors have that position set as the center position. Hope that helped you with something :)
@gergoszabo8656
14 күн бұрын
I have the same issue with a different build. I think the problem is that Brick Controller 2 doesn't recognise the Powered Up L Motor as a Servo Motor hence the lack of calibration options. Perhaps the BuWizz app does so I'd recommend trying that. Let us know how you get on!
@bg3305
13 күн бұрын
@@Anotherbrickintheworld Thank you for your kind reply. Do you mean that the steering motor can be calibrated even if you use BuWizz 3.0 and PU L motor on Android devices? I didn't know that. Actually, I built your MOC-170345 using PU L motor instead of PF Servo motor, because I only have Buwizz 3.0. For now, I added one PU Smart hub and set it for steering. I should test it with Android devices later. Thanks.
@bg3305
13 күн бұрын
@@gergoszabo8656 The BC2 app recognizes the PU L motor well. However, this is a problem if the BT hub is BuWizz and the smartphone device is an iPhone. I saw something on Eurobricks that BC2 app developers do not yet support auto-calibration for iOS+BuWizz. So I added a PU Smart hub and set it for steering.
@Anotherbrickintheworld
13 күн бұрын
@@bg3305 Good luck on that! I'm glad you built one of my models :)
scam !!🤣🤣
@Anotherbrickintheworld
23 күн бұрын
What do you mean by scam?
@gorlier5388
23 күн бұрын
I was referring to an AD, on your channel about bitcoin.
@Anotherbrickintheworld
21 күн бұрын
@@gorlier5388 I see. I'm sorry you got a scam on one of my ads, I don't have any control on them