LEGO Detachable Gondola / Ski Lift
Ғылым және технология
The new LEGO Detachable Gondola is now operational. Its features and highlights include:
- Completely original design of the passenger cabins
- Automatic doors
- Transport gondola with approach notification in stations
- High-tech control system
- Improved station conveyor system
Пікірлер: 146
8 years later and this is still awesome!
@Coasterpostalt
2 ай бұрын
10 years now!
This needs to become an official set. LEGO hasn't done ski sets in years...
I just love the door open and close system! Very well made!
@TheTimmy376
9 жыл бұрын
Thanks :)
@aenshamsterchannel1329
6 жыл бұрын
Me too
Awesome! This is amazing, I've always wanted to build a ski lift as I'm an advanced skier & love k'nex & legos. This is great!
@TheTimmy376
9 жыл бұрын
Thanks
@gopherguts2183
7 жыл бұрын
Greg Golfomitsos same here!
@gavincrowley562
7 жыл бұрын
Gopherguts 2 third!
Great! Another great build of lego gondola with workable doors! Makes me want to build one as well...
Completely amazing!
This music gives me nostalgia
Door close and open system is amazing
this is sick bro
Now this is awesome
very cool!
Love it its awesome I want more gondola vids like this make a bigger one plz big fan of you
That is very awesome
So cool
I love the slowing down system
Super cool
mind blown! amazeballs!
@TheTimmy376
7 жыл бұрын
Thanks
Fantastic! The only thing I would do is a longer station and a bigger speed reference between station and cable. Well done!
Bonjour, bon travail ! Quo man vous avez réussi à faire saint télécabine. ❤❤❤❤❤❤❤❤
Impressive :) I´ve built similar lift once, so I know it takes a lot of work :D
I always thought about this and you built it for real, nice!
You need to publish this to LEGO!
Oh, good gravey! How the, where the, what the. That is amazing.
Dein video finde ich super
@SolidBlueBlocks
4 жыл бұрын
Ja, echt mega!
nice man good job!
@TheTimmy376
9 жыл бұрын
thanks ;)
wow, very nice. respect !!! :))
@TheTimmy376
9 жыл бұрын
Thanks
One word: WOW.
good job. like a ingenieur
The door open/close was very clever.
@TheTimmy376
7 жыл бұрын
Thanks
WOW good
coolest lego thing a i have ever seen THE TIMMY376 YOU ARE SOO COOL BRO!
@caiwilkie6453
5 жыл бұрын
kzread.info/dash/bejne/k2aIpNKqmKW6kaQ.html
Nice job, especially for the doors, which are not simple to include at all !
@TheTimmy376
10 жыл бұрын
Thanks! Love your seaplane by the way ;)
@pg5200
10 жыл бұрын
Thank you ;)
@huuthanh5888
9 жыл бұрын
Qnjvhhvhh Bslhjjhbnnbvc
TheTimmy376, you are very clever to do this. Great Job!
@TheTimmy376
8 жыл бұрын
Thanks
@bananasolid
8 жыл бұрын
+TheTimmy376 😄
Best sklift ever
@TheTimmy376
9 жыл бұрын
Thanks
The door open/close mechanism gave me religious ecstacy
Please make instructions for this. Its so cool. Thats hard job to make automatic doors and high-tech control system
Boah so cool
lol die Seilbahn ist so mega gut 😀
@TheTimmy376
7 жыл бұрын
Danke ;)
Love it!!! (especially since the chairlifts I attempted to make don't work)
keiner kann so coole seilbahnen bauen wie du
cool
SO COOL!!!
@TheTimmy376
7 жыл бұрын
thanks
@coffeen8128
7 жыл бұрын
TheTimmy376 how long did it took for you to think how everything works and how long did it took for you to build it? :3
@TheTimmy376
7 жыл бұрын
The whole construction and tuning process took a few weeks.
@TheTimmy376
7 жыл бұрын
The whole construction and tuning process took a few weeks.
Amazing very realistic light opening door you need a like but show more The system How it work
@TheTimmy376
7 жыл бұрын
Thanks
This is awesome! Where do you get the control panel and gear box from? Also which lego technic kit did you use?
Did you built the gondola and unhooksystem to the valley and mountain station without any guidance? Do you have more detailed pictures, who explain more precisely how to build it? I have to mention that I’m 12 years old.
Hi Timmy! I love the lift. I still cant figure out how to rewire lego motors to standard electric pushbuttons. I built myself a Doppelmayr fixed-grip single with a control panel just like yours, but cant get it to function with the motors correctly. And one last thing. Can you tell me how/where you get the music for your videos? Thanks;)
Can you send it to Lego or create a tutorial or a book of instructions for this amazing machine?
And I can't build a fixed double :(
hi, i think your gondolas are wonderful, do you have assembly instructions
On my gondola that I am making I can't get the conveyer to work properly get and the blocks you used for your wheel device on your gondola can you please send me the parts you used for both and how they work. Thanks love your gondola. :)
And ProMinecrafter36: There's one Power Functions XL driving the haul rope (IIRC, it's in the top terminal) and one PF/M motor in each terminal driving the conveyor system.
@legotech7400
9 жыл бұрын
So all three are controlled together?
@TheTimmy376
9 жыл бұрын
ProMinecrafter36 Correct. If they were allowed to operate at different speeds, the gondolas would get out of sync very quickly. There are disconnect switches though, so either conveyor motor can be turned off for a short period of time, to increase spacing between gondolas that have already left the station, or decrease spacing between gondolas that are approaching.
@TheTimmy376
7 жыл бұрын
Auto interval was a system on an earlier chairlift which would briefly stop the conveyor in one terminal if a sensor found that a chair had arrived too early, ensuring roughly equal spacing between the chairs.
If a fixed grip takes like 3 days (finding parts+building) this must have taken
Hey, cool project!! I want to make 1 for my own but I don’t know how to do it. Can you make instructions with partlist for me? thank you in advance.
wow - this is amazing! you made my childhood dream come true! ;) how did you connect the rope ends so seamless?
@TheTimmy376
5 жыл бұрын
Thanks Erich. The rope ends are connected by a quirky combination of tape, sewing (between the nylon threads), and superglue. You can see this splice appearing in the right of the picture at 0:39.
@oakinger
5 жыл бұрын
@@TheTimmy376 tx. good to know others are struggling too ;). I was looking for a better solution and found that paracords are great because you can simply melt the two ends together over a candle - I bought this one and the melted connection is surprisingly strong: www.amazon.co.uk/gp/product/B00O8M11JA/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This is crazy, what type of rope did you use?
ProMinecrafter36: There's no reply button on your comment, so I hope you see this. The trick to re-wiring the motors is to cut off the plug at the end, leaving about an inch of wire for the plug so you can solder it back on if you want to. The motor, in fact, only has two wires, even though the insulation allows for four. Plug these into any 9V power source that can supply at least 2 amps for an XL motor, or 1 amp for a regular motor. I actually used a 12V supply, which works well, but appears to damage the medium-size motors over time. To reverse direction, simply swap the wires' polarity. About the music, I can't tell you because of copyright issues, sorry ;)
@legotech7400
9 жыл бұрын
Thanks;)
@legotech7400
9 жыл бұрын
One more question. How many motors are there on the lift?
@kaiserindustries5567
8 жыл бұрын
kannst du deutsch
@TheTimmy376
8 жыл бұрын
+Creep503 Ein Bisschen, hoffentlich gut genug
@JS-nq5cy
8 жыл бұрын
How many chairs are on it?
please refer to the position of the entire cableway link to the position
Geez how do u have the time for this
Was sind das für rädee die du als klemme benutzt hast?
Super Bahn!👍🏻 Abkaufen?
interesting at min : 1:08 - 1:24
Hello do you have the building LEGO Detachable Gondola / Ski Lift
bauen sie Prototypen für Doppelmayr?? sehr gutes Seilbahn prima ich hab es auch mal versucht es nachzubauen! Weiter so !! ;)
@TheTimmy376
7 жыл бұрын
Danke!
How did you keep the gondola's from slipping down the cable. They don't appear to be attached. I coach a Lego Robotics club and they are stuck on this problem for their sky lift.
@TheTimmy376
9 жыл бұрын
They are not actually "attached" to the haul rope. The grip consists of two fixed wheels, each lined with a small rubber band. With a 2 millimeter cable, this works very well, and I've never seen a gondola slip down in normal operation. But I can imagine on a very steep slope or with heavy gondolas, this method may not work reliably.
das mit der tür ist gut gelöst
@TheTimmy376
8 жыл бұрын
+drachen freund 67 Danke
@Arkyderg
8 жыл бұрын
da wehre ich nie drauf gekommen
@TheTimmy376
8 жыл бұрын
***** Danke. Und ich arbeite nicht bei Doppelmayr, nur ein Fan ;)
The detatching method must be difficult to get right. And also keeping tension on the cable
@TheTimmy376
5 жыл бұрын
The attachment and detachment of the grip is not as difficult as you might think. The grip simply "rests" on the cable, it does not positively engage, so the biggest challenge is aligning the grip with the rope properly. Tension is an entirely different story, but once you've built the terminals strong enough, it comes down to keeping them in place with some heavy rocks.
I try to do ski lift from normal lego, but i doesnt work 😔
Ich versuche so verzweifelt das nachzubauen :D War das Eine Piepen eigentlich das CIS?
@TheTimmy376
9 жыл бұрын
If you mean the buzzer at 2:54; it is triggered by the arrival of the transport gondola. There is only one, and it doesn't have automatic doors. Instead, its grip hits a switch when it enters the terminal, which sounds the buzzer.
@ModdeOnAir
9 жыл бұрын
TheTimmy376 Du kannst deutsch reden wenn du kannst :D
I want you to put your camera on your recent lift. What I mean is: put the camera on one of the chairs/gondolas maybe?
@TheTimmy376
7 жыл бұрын
We've done that before, but the picture quality really wasn't good enough to upload to KZread...
@CBF1
7 жыл бұрын
Oh dear
How long did it take for you to make this?
@TheTimmy376
7 жыл бұрын
If I recall correctly, a couple of weeks. Of course, that was with prior experience building fixed-grip lifts.
@CBF1
7 жыл бұрын
Ok. Just do it with whichever lift you have recently built is what i am saying
I am mohammad sharifi,Enginer meckanik in iran please give me informeation about yan lift
Hast du das selber gebaut? :D
Sweet.. Can it carry weight?
@TheTimmy376
10 жыл бұрын
It can carry about 50 grams, so the total gondola weight is about 150 grams. But if you try to run it with all 8 gondolas loaded to that weight, the gearbox will start making some weird noises :)
𝓦𝓱𝓮𝓻𝓮 𝓭𝓲𝓭 𝔂𝓸𝓾 𝓰𝓮𝓽 𝓽𝓱𝓪𝓽
Can you buy this item online or is it created from scratch?
@TheTimmy376
2 жыл бұрын
It was created from scratch, and is now demolished. But if you'll wait just a few more weeks, we'll have something else for you to buy, so stay tuned...
@trumpettothemax9522
2 жыл бұрын
@@TheTimmy376 I will!
And Timmy, do you need Bluetooth for this? I think not.
@TheTimmy376
8 жыл бұрын
No, the buttons simply control a few relays that turn the motors on and off. The two terminals are connected with a few wires.
where did you get the set?
@TheTimmy376
9 жыл бұрын
brandon lim There is no set, this lift was built from scratch
@yoinkersonb1qde665
9 жыл бұрын
so cool!
You want me to tell you how to make.
can i have the instruction please?
@TheTimmy376
3 жыл бұрын
Sorry, there are no instructions, the construction was a process of trial and error.
geile scheise die beste Bahn die ich je gesehen habe!
One of the gondolas don't have automatic doors !!
@TheTimmy376
10 жыл бұрын
That's because it's the transport gondola :) This is the one exception that doesn't have automatic doors. Instead, it hits a switch when in enters the terminal which triggers an alert sound (see 2:50)
@2670johnson
10 жыл бұрын
Ok thx
qui pour ai faire mieux?
@TheTimmy376
7 жыл бұрын
Je ne parle pas français. Baguette.
@gavincrowley562
7 жыл бұрын
TheTimmy376 Lmao
Molto bella, complimenti!!!! kzread.info/dash/bejne/rIWV1ayeed3Kk5c.html
Hmmm, I can do this better and I will.