A simple round sign for my backdrop. This is video of how I made a backlit sign. The LEDs are Red, Green and Blue on a strip with a remote.
Жүктеу.....
Пікірлер: 45
@lilylau51207 жыл бұрын
fantastic job!
@freddyspaghetti10557 жыл бұрын
i love your vids. keep up the good work
@jamesallen60073 жыл бұрын
Excellent. Thank you.🇬🇧👍
@DenAndMug4 жыл бұрын
You have made this build look simple, I know full well if we tried this out it wouldn't have gone well haha. Nice work!
@FILMLANDSTUDIOS8 жыл бұрын
that so cool!!
@hopelesssoap7 жыл бұрын
Hi , I need a sign for my cafe, exterior , just saw your video ,love it , do you make for others?
@tim627447 жыл бұрын
NICE JOB MAN WISH I HAD THAT CNC CUTTER
@OKVanAutoUpholsteryBellGardens5 жыл бұрын
Where did you getbthe white clear transparent thing? Im not sure where to find it
@TheAdriano21117 жыл бұрын
Muito lindo trabalho
@totaltaff88867 жыл бұрын
What says did u use to make the sign shine so much awesome video by the way
@mcbarry4u7 жыл бұрын
Nice and explanatory! Pls what make of laser cutter would you recommend ?
@thebuildcave8967
7 жыл бұрын
Mine is from Rabbit LaserUSA.
@ferxsc67107 жыл бұрын
What did you use to give it that glossy/shine look?
@LaurensiusYuliusTahaka6 жыл бұрын
ah.... my daily drill.... those edges is awesome man.... need lots of effort making that for sure.... i'm a bit clumsy so i often break it.... >.
@Mental-Maniac7 жыл бұрын
I need a mock up sign made. where are you located?
@CrispyVideos5 жыл бұрын
Very cool. Your channel is going to be huge. I just known it.
@emrahy.8497 жыл бұрын
wow god damn..cool
@sevenstarmusicalgroup27892 жыл бұрын
What is the Name of white sheet That you cut to put behind the board ???
@JeremyCook7 жыл бұрын
Very cool - what did you use for the diffuser?
@Geeksmithing
4 жыл бұрын
RIGHT?
@xxxbrokedownxxx8 жыл бұрын
Can I ask what is that plastic like diffusion material and where did you get it?
@TheReconPrepper
7 жыл бұрын
could be acetate or some arts and crafts stores have a thin material like that used to cut stencils out of. Check Michaels Arts and Crafts or Somewhere like that.
@an_what
5 жыл бұрын
I'd have to guess vellum paper
@chinbanzai6 жыл бұрын
How much would u charge for this piece of work ?
@EarthshipFreedom7 жыл бұрын
grest sign! What is the material that is frosted and the adhesive? outdoor compatible? ?
@vishalvishi9867
7 жыл бұрын
Drone Retrieval Unit
@thebuildcave8967
7 жыл бұрын
It was just something I had laying around. I will try and find out. The adhesive is Goop or E-6000.
@kennethbailey3197
7 жыл бұрын
Drone
@LoiselsPhotography4 жыл бұрын
What's that wax paper stuff you are using at the end? What does it do?
@Duke93720
4 жыл бұрын
It's a diffuser for the light. Lense from a 2x4 fluorescent light fixture?
@TheReconPrepper7 жыл бұрын
what i would like to know is what model and how much did the cnc machine cost?
@thebuildcave8967
7 жыл бұрын
I got it from rabbit lasers usa. It was an 80 watt model with a 1200mm bed.
@lisaeve64267 жыл бұрын
I wish he could make my sign!
@noahvandijck3 жыл бұрын
Hi im here from madisons tweet
@wimfu7 жыл бұрын
I like the build! perhaps shorten a few of the repetitive things like your flexi cuts and the lining of the lights and the like for brevity's sake. Great looking sign when all is said and done!
@samstinner7 жыл бұрын
gg
@ghostusmc7 жыл бұрын
Mr. Limpet camera lens. AAAHHHHH
@HusenZailani6 жыл бұрын
Very good , maybe I have video like your video, visit may channel
@an_what5 жыл бұрын
Probably needed to glue in that light strip seeing as the glue on the back of them is pure shit
@thebuildcave8967
5 жыл бұрын
I guess it doen't show it in the video but I glue the edges down with E-6000
@jasonjinx7 жыл бұрын
thats a light box bruhhhh internally lit not back lit
Пікірлер: 45
fantastic job!
i love your vids. keep up the good work
Excellent. Thank you.🇬🇧👍
You have made this build look simple, I know full well if we tried this out it wouldn't have gone well haha. Nice work!
that so cool!!
Hi , I need a sign for my cafe, exterior , just saw your video ,love it , do you make for others?
NICE JOB MAN WISH I HAD THAT CNC CUTTER
Where did you getbthe white clear transparent thing? Im not sure where to find it
Muito lindo trabalho
What says did u use to make the sign shine so much awesome video by the way
Nice and explanatory! Pls what make of laser cutter would you recommend ?
@thebuildcave8967
7 жыл бұрын
Mine is from Rabbit LaserUSA.
What did you use to give it that glossy/shine look?
ah.... my daily drill.... those edges is awesome man.... need lots of effort making that for sure.... i'm a bit clumsy so i often break it.... >.
I need a mock up sign made. where are you located?
Very cool. Your channel is going to be huge. I just known it.
wow god damn..cool
What is the Name of white sheet That you cut to put behind the board ???
Very cool - what did you use for the diffuser?
@Geeksmithing
4 жыл бұрын
RIGHT?
Can I ask what is that plastic like diffusion material and where did you get it?
@TheReconPrepper
7 жыл бұрын
could be acetate or some arts and crafts stores have a thin material like that used to cut stencils out of. Check Michaels Arts and Crafts or Somewhere like that.
@an_what
5 жыл бұрын
I'd have to guess vellum paper
How much would u charge for this piece of work ?
grest sign! What is the material that is frosted and the adhesive? outdoor compatible? ?
@vishalvishi9867
7 жыл бұрын
Drone Retrieval Unit
@thebuildcave8967
7 жыл бұрын
It was just something I had laying around. I will try and find out. The adhesive is Goop or E-6000.
@kennethbailey3197
7 жыл бұрын
Drone
What's that wax paper stuff you are using at the end? What does it do?
@Duke93720
4 жыл бұрын
It's a diffuser for the light. Lense from a 2x4 fluorescent light fixture?
what i would like to know is what model and how much did the cnc machine cost?
@thebuildcave8967
7 жыл бұрын
I got it from rabbit lasers usa. It was an 80 watt model with a 1200mm bed.
I wish he could make my sign!
Hi im here from madisons tweet
I like the build! perhaps shorten a few of the repetitive things like your flexi cuts and the lining of the lights and the like for brevity's sake. Great looking sign when all is said and done!
gg
Mr. Limpet camera lens. AAAHHHHH
Very good , maybe I have video like your video, visit may channel
Probably needed to glue in that light strip seeing as the glue on the back of them is pure shit
@thebuildcave8967
5 жыл бұрын
I guess it doen't show it in the video but I glue the edges down with E-6000
thats a light box bruhhhh internally lit not back lit