I recommend this printer so much, I use it in my game prototyping and its utterly incredible in its resolution.

@maximiliantrober224

3 жыл бұрын

I bought one just this week what settings do you recommend for miniatures?

@benefennec3493

3 жыл бұрын

@@maximiliantrober224 oksy so, I use the program Chitubox primarily for slicing. the settings I use are; Layer height: 0.05mm Bottom Layer count: 8 exposure time: 8 seconds Bottom exposure time: 60 seconds and that should do you fine

@maximiliantrober224

3 жыл бұрын

@@benefennec3493 Thanks I will try them out

dude, this video is really really good. very informed with details on how to do this. thank you! finding spikey bits has been awesome

Here's my list of 3d Printers and essential products to set up your own factory at home! ➡️ snip.ly/3dprintingessentials Anycubic Photon is pretty affordable and easy to use: snip.ly/ba7012 Anycubic Wash & Cure Station snip.ly/Anycubicwash Elegoo Mars (has pretty high marks as well from folks) amzn.to/2U4aMr4 Carbon Scrubber Air Filter: amzn.to/2J00wem 3D Printing Supplies: You won't need the pickle jars or the UV cure unit if you get the Anycubic Wash & Cure Station (below). Waterproof Silicone Prep Mat amzn.to/3aYDobY Microfiber Cleaning Cloths (for the print film) amzn.to/2vZLa6T Pickle Jar for washing parts amzn.to/2WgYpdS 90% or higher Isopropyl Alcohol (12 pack) amzn.to/2Qg5Wpq UV Curing Station (3-time settings) amzn.to/33l0cA2 Anycubic Wash & Cure Station snip.ly/Anycubicwash These are affiliate links, as an Amazon Associate, I earn from qualifying purchases #3DPrinting

My god the detail on that thing is insane!

my mouth is salivating for one of those printers :O man the detail is insane for a affordable home printer

I want a 3D printer so much

Get a rubber mat and put the printer on it. It helps absorb vibrations to prevent the print from having layer shifts. Download filevalidator to help find islands on your model. For easy support removal after you put the model in alcohol dip it in hot water. The supports will just slide off like spaghetti. By doing that it will also reduce scars on the model. Also you can put ballpoint on the supports to avoid even more scars on the model.

could you post the programs you use for 3D printing. i just got an elegoo and looking to print

Super easy

Do a unboxing video on the new start Collecting boxes.

great job!

@spikeybitstv

4 жыл бұрын

Thanks!

Thank you for the video

@spikeybitstv

2 жыл бұрын

You're welcome

thats a ridiculously cool

Can you please help me set up printing. My first time and it's a little frustrating.

Why do you put a magnet on the base?

I'm looking to get into 3d printers... is this good for beginners???

@spikeybitstv

2 жыл бұрын

some say the best!

it can print any render from cad designed program ?

@spikeybitstv

3 жыл бұрын

depends on what slicer program you use, but mostly yes, they are all based off Autodesk in some way or another.

@daox817

3 жыл бұрын

@@spikeybitstv ok thank i all way get render from matrix software

Nice video but you skipped the bit I was most curious about, Photon Workshop

If you can’t get IPA 91% you can use Mean Green with the pickle jar’s but not with the Anycubic curing station. The curing station makes a vortex and make suds and foam with using mean green, I should know it’s happened lol.

@spikeybitstv

4 жыл бұрын

Oh, nice thanks for the tip!

Its a good video. I think as time goes on, this will be cheaper and cheaper. What i dont understand is why GW is pushing skirmish games. This method is not price or time effective if you have to print a 200 model army with a few tanks thrown in there. 10 to 15 models warband at a time thou, that is very very viable.

@voxthesergal

4 жыл бұрын

The counter argument to that is the fact that the ONLY thing that increases print time is model height. A guardsman is what, barely an inch and a half at most? You could fill the print bed with a ton of them at a time and print an entire squad per print, which MIGHT be 3-4 hours per cycle. It costs you maybe 50 cents per cycle versus the 30+ for a 10 man. I'm sorry, but there's absolutely no competition anymore. The ONLY thing keeping GW in traction is that their model quality is still insane and that you can't participate in Tourneys (local or otherwise) using 'proxy' models.

@xxapoloxx

4 жыл бұрын

@@voxthesergal I think the 3 things that GW in the game are: 1- The lore, 2- The model Material (hard plastic is still far superior than the alternatives), 3- The model design (to a much lesser degree).

Where is a video for the programs tutorial for the many programs?

@spikeybitstv

3 жыл бұрын

Here's a couple more we did kzread.info/dash/bejne/d5xmlsqGncSYlqw.html kzread.info/dash/bejne/dIths5Wxo8zNfrg.html but also i linked a bunch of must-watch videos here: spikeybits.com/2020/06/price-hikes-got-you-down-learn-3d-printing-for-miniatures.html

@johnjoseph2010

3 жыл бұрын

@@spikeybitstv thanks!

@johnjoseph2010

3 жыл бұрын

@@spikeybitstv what are the names of the four programs you use for printing (not miniature files but programs used for printing)

The resin level in the thumbnail gives me anxiety.

Nitrile* gloves, sounds like you were saying nitrate. ;)

@wallopadonkey

4 жыл бұрын

Kris Jacobs he was

so one could bu ythe setup , learn to print , then get the files for free, print stuff , sell and profit :) thanks for the info :) looks like a new earner for me :)

@SPAMLANWALKER

3 жыл бұрын

@[a] Leonardo Juangorena Franco lol at this point idgac about llegality :D

How have you not aged over the years!

UUUUUGGGG the liqued one nope just to mutch to do but yes you cant do think three of them but if like it will seee as post on the tube of you

Buyers beware anycubic took 50 days for them to tell me I wasn't going to be able to get my package it was lost

zzz

I don't think you understand the difference between Nitrate and Nitrile one is a fertilizer, the other is a rubber

@spikeybitstv

3 жыл бұрын

Lol it’s not that I don’t understand, I just have trouble with my werds sometimes

Stupid sales pitch doesnt help

Talk about two faced. You not long ago did real damage to the 3d printing community by telling everyone it was bad for the gaming hobby and now you want to cash in on it.

@spikeybitstv

4 жыл бұрын

@@elio225 Not sure what you are speaking of here, this video doesn't cover anything about Legio? Could you provide a link to what you are referring to perhaps for me, please?

@spikeybitstv

4 жыл бұрын

@@elio225 While I apprecate you presenting this here, I happened to notice that this content seems to be dated back to October of 2019, and seems to be taken from non-public sources like discord and/or Facebook messenger perhaps? I have to ask, why not contact us about this back in October so we could look into it properly, instead of waiting to throw shade at us on an unrelated video? Also, I have to ask, has anyone spoken with Legio Models about this, and if so what was their response?

@spikeybitstv

4 жыл бұрын

@@elio225 Also to be clear we don't care what anyone prints with anything. If you want to print 40k proxies go for it. If you want to use them in a tournament unpainted neon green, then not only is that a "no" from us, and its also a no from the ITC as well. Many have suggested that rampant printing of proxies for Warhammer could have a very negative impact on the hobby from loss of sales, or even in some extremes, store closures. Once again the point of our editorials is to suggest that if manufacturers offered downloadable files for their models that customers would actually buy them instead of "pirating" them. It's very similar to what the music industry did 20 odd years ago. If you don't like that opinion, hey that's cool too :)

@spikeybitstv

4 жыл бұрын

@@elio225 Would you mind sharing with me the communications between you and Legio and their comments back in reference to your group's accusations, please? support AT spikeybits.com

@spikeybitstv

4 жыл бұрын

If you mean addressing copies of models that were being posted for download before the manufacturer's model was even released, or showing how some players think it's socially acceptable to play with unpainted freshly printed models at tournaments, then yes we did bring that up. Does that make us two-faced for producing content that promotes neither of these things?

Wasnt "3d printing ruining the hobby" according to you? Stop ruining my hobby - sincerely Nick

@spikeybitstv

4 жыл бұрын

Nicholas Kirlis irresponsible 3d printing continues to be an issue for the hobby that is for sure. But anything sounds bad when you take it out of context with no reference doesn’t it? At the end of the day it may fall to manufacturers to keep it from destroying the hobby, by providing legitimate copies of files to purchase similar to how the music industry did so 20 odd years ago. 😊