Learn how to Read a Tape Measure - Fraction - Measuring and Marking Lesson Series -
Welcome to the Construction Measuring and Marking Series: In this video, we will review the basics of how to use a tape measure and related inches and fractions.
Video lessons in this series include Tape Measure Use, how to Read a Tape Measure including the inches and fractions, and all the other marks and symbols. There are also videos on the Speed Square, Chalk line, and levels. Join us for the entire lesson series
Please support our channel and click subscribe Now!
If you want to learn more - please check out one of our free courses on www.tradeskillsu.com/, our learning portal designed to support trades education. The course includes skills exercises, knowledge reviews, and other custom learning elements. Check it out and learn like the pros -
If you teach construction and need instructional resources for your construction training - please check out our website for more information on our no-cost resources. www.teachconstruction.org/
0:00 Finding and identifying marks
1:56 Whole inches
2:57 Half inches
4:00 Quarter inches
5:12 Eighth inches
6:37 Sixteenth inches
8:41 Mark review and examples
Пікірлер: 62
I 100% understand this now. WOW you're a great explainer!
Wow all my adult life I always wanted to know how to read the measurements on a tape measure. This video made a whole lot of scents to me and lifted the stress I had for so long. Now in am confident and measuring and cutting to correct lengths. Thank you, sir, I salute you for a job well done.
@ConstructionEd
Ай бұрын
Glad you like me the video
Thank you. I'm going to work like a bull released from a cage. awesome 👌 bless your heart
Thank you for breaking down the process.
@ConstructionEd
Жыл бұрын
Glad it was helpful!
If I could have you as my teacher I'd cry happy tears lol . I want to build a project tiny house but first I need to educate myself and your channel is very nicely explained!!
@ConstructionEd
10 ай бұрын
Wow, thank you! Hope you enjoy the video lessons. We have more lessons at TradeSkillsU.online when you are ready for floor framing and roof framing
Thank you so much. I'm 31 years old and could never figure out those dam marks. But you made it so easy. Thank You!
@ConstructionEd
Жыл бұрын
Thanks for the kind words and glad it helped
Very nicely explained. Thanks. 🙏
@ConstructionEd
Жыл бұрын
So nice of you
You explained so well. Thank you
@ConstructionEd
Жыл бұрын
Glad it was helpful
The channel is so in details. So Awesome
@ConstructionEd
Жыл бұрын
thank you very much
Great vid, thank you.
@ConstructionEd
Жыл бұрын
Glad you liked it!
Please keep this channel going ...it is awesome
@ConstructionEd
Жыл бұрын
Thank you, we are glad you enjoy the channel
TANK YOU VERY MUCH GOD BLESS YOU 👍🤝✌️👏👏
@ConstructionEd
Жыл бұрын
wow - and to you too
Wow awesome teaching
@ConstructionEd
10 ай бұрын
Glad you think so!
That's why we invented the decimals in the Europe which make our lives easier ;) Anyway, great vid, thank You!
this is help full ,it tech you all between each number
@ConstructionEd
9 ай бұрын
glad it was helpful
Nice. I used a mesure tape to teach my grade 2 kids fractions.
@zimmermanlandscape9287
6 ай бұрын
A calculator also works well for that
@ConstructionEd
5 ай бұрын
That is awesome!
What an amazing channel
@ConstructionEd
Жыл бұрын
thank you for that comment
i believe that was the best!
@ConstructionEd
Жыл бұрын
thank you
Awesome
@ConstructionEd
Жыл бұрын
Thanks Ron
Very thorough... learned something new. #ThankYou #NewSub 💯
@ConstructionEd
Жыл бұрын
Welcome!
👍awesome
@ConstructionEd
Жыл бұрын
thanks again Charles
Great video. Can you do one where we need to add fractions using the tape? Thanks
@ConstructionEd
Жыл бұрын
Great suggestion! We are redoing the tape measure lessons. Maybe we will add that in
It always surprise me there’s only three countries in the whole world that officially use this system : Liberia, Myanmar and the USA. Have a try to the metric one. In less than a minute you’re good to go. I use both with « bilingual » tape, imperial for some rough cuts and metric when I need to multiply, divide or do complicated and precise measures.
@ConstructionEd
Жыл бұрын
Metric is much easier - maybe someday the US will convert.
@fredericl6190
Жыл бұрын
@@ConstructionEd I’m also watching the Tall carpenter, and Scott Brown carpentry, respectively living in the UK and New Zealand. Both are good teachers, like you, and really efficient with both measure systems. Have a try !
@SinglehandedSailing
Жыл бұрын
@@fredericl6190 I will look at their channels - but since our video content is primarily focused on the US and Canada (Canada uses metric for everything except construction) regions it is not likely that we will redo the videos into metric and time soon
@fredericl6190
Жыл бұрын
@@SinglehandedSailing Hello Michael, I’m myself living in Canada, and so dealing with 2 by something studs, or 4 by 8 sheet of plywood. But even if most materials are in imperial measurements, metric has its place. No I’m not suggesting you redo all your videos. But try it for yourself. It’s just one more efficient way to think and work. Stairs by example, or any tool made in Japan or Europe. Have a nice evening.
@ConstructionEd
Жыл бұрын
@@fredericl6190 I do agree that metric is better - when I was in school in the late 70's they threatened that the US was going to shift - but it never happened. It is amazing how much fractions are incorporated into everything about construction, even with just the material terms as you pointed out. Joe and I have discussed internally making the change, especially since our Instructional Resources are used in almost 150 schools in Canada...but it is a major lift to get that done. Thanks for all the comments.
I once had to type up a memo reminder about my employer's requirement for all staff in the manufacturing of their wood products had to have their own 1" carpenter's tape measures with a minimum of 25 feet. I asked why that specific one, and was told by the founder that the 1/16", 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16" markings were all 1/16 of an inch; all the 1/8" , 3/8", 5/8", and 7/8" markings were 1/8th of an inch; all the 1/4", 3/4"" markings were 1/4"; all the 1/2" markings were 1/2", and all the 1" markings were 1", as well as the markings for studs and wood I-beams. That may have been a certain brand and it was 20 years ago, so, standards may have changed. I was trying to find information confirming that. Have you ever heard of that?
@ConstructionEd
2 ай бұрын
I have heard that - but have never been able to confirm it.
One question? Why do they divide 8 feet by five? Why not some other number? Is that the only reason for the diamond? Just curious.
@SinglehandedSailing
10 ай бұрын
19.2 is the result of dividing by 5 - It is essentially a standard repeating pattern that is needed for "layout" when framing if the framing layout pattern is not using 16 OC or 24 OC. Watch the framing video series about the importance of layout and it will make sense.
My tape measure has 32 marks now I’m well confused so rounding them down or just ignoring the smallest marks.
@ConstructionEd
6 ай бұрын
It may be best to use a tape with 16th’s as the smallest. Or you can also skip the 32nd marks.
MAN OH MAN IM 62yrs old and you explained like I was a 5 yr old but the school teacher was harder lol THANK YOU SSSSOOOOO MMMUUUCCCHHH I GOT IT
@ConstructionEd
Жыл бұрын
glad to hear it
Man. It seems so over explained, But how much can you assume a person knows, or what blocks they might have. Getting back to the basics can help you remember
Mid
@ConstructionEd
Жыл бұрын
Sure thing
@engr810
Жыл бұрын
as an engineer were not taught how to read measuring tape. and I am glad to learn about channel . thanks for your work