Finally! The guide I have been looking for! Screw those 6 years in school, 2 rounds of exams, and 4 years of apprenticeship!

@Decodebd

3 жыл бұрын

Glad you have liked it.

Amazing Tutorial.. looking forward for similar tutorials on Steel Buildings and PEB structures.

Thanks for this lecture, Md. Humayan Kabir. It would be highly helpful if you make a tutorial on a heavily irregular plan where setting the grid line is a cumbersome task. Hope you would not disappoint us!!

finally the proper designs thank you so much sir for sharing your knowledge.

You are just the best tutor I have seen on youtube ever. this is just so wonderful. Thank you so much. I have difficulty purchasing your design aid, but Inshala, I will get it.

@Decodebd

3 жыл бұрын

You are so welcome!

Best explanation ever seen on KZread ..thank you sir

Thank you very much for all the effort and the valuable information, a very good channel, to watch, why not give us a full training to study, model and analyze a multistory building from A to Z through this wonderful program

@Decodebd

3 жыл бұрын

There is already one course- kzread.info/dash/bejne/dql4yJqjdqWrf84.html

Great, a million thanks.

Assalamualaikum sir Thank you for your help Keep writing article on your website it's really very helpful 😊👍

Excellent sir...thanks a lot. Really helped a lot.

A very good and beneficial tutorial specially the footing part. Thank you very much. But, I could not follow the stiffness modifier for torsion and for serviceability as 0.5

thanks for the great effort and wonderful job keep going

THANK YOU VERY MUCH SIR YOU ARE GREAT IT HELP ME LOT

hello mr engineer .I love your channel and i have learnt a lot from you and you are amazing in my point of view.I am from iran and i love engineering in all kind of especially civil eng. God bless you man.

@Decodebd

3 жыл бұрын

Thanks a lot dear. Ameen.

جزاك الله كل خير

thanx for the great information and this perfect presentation.

You are doing well. Thanks.

Dear sir ! im from VietNam and i follow your channel for a long time, i admiration you and respect you because of your product is very amazing Wish your channel always evolved

@Decodebd

3 жыл бұрын

Thanks a lot

Greeting sir, i m fresher on ETABs and your tutorial help me lot and sir further i will be grateful to you if sir could share those excel format for designing beam, column, slab and etc please sir its my humble request.

Thank you very much for all of your hard work and valuable information. This is a great channel to watch.

@Decodebd

Жыл бұрын

So nice of you

جزاك الله خير

You are a great man, I thank you from the bottom of my heart ترجمه قوقل العفو اذا في غلط

Very Informative... Shukran....

Thank you for your times, effort I am really appreciated however would that be possible to demonstrate the Flat Plate Slab designs with different thickness, fold and irregular columns without beam.

Thank you for sharing the best tutorial.

@Decodebd

3 жыл бұрын

You're very welcome!

thanks alot for the great work bro, be blessed, i have learnt a lot from your channel

@Decodebd

3 жыл бұрын

My pleasure

@altamont_2439

3 жыл бұрын

@@Decodebd man i've checked your videos in your channel - you're an absolute beast!!

@Decodebd

3 жыл бұрын

@@altamont_2439 Thanks for your inspiration.

Alhamdulillah finally I cleared my doubts

God Bless you

This is what we actually need to know thanku so much sir

@Decodebd

3 жыл бұрын

Welcome.

please make a tutorial on the interpretation of results of slab stresses and forces in etabs.

Kanu method is used for structural analysis for horizontal loads such as wind or earthquake.

One thing that I can say for you is that, you are my best starting from when I was in Campus even right now I am at government bureau . Sir how can I get this complete excel sheet please ?

Thank you Sir.

@Decodebd

3 жыл бұрын

You are most welcome

Very thank

Thanks you

Thank you sir 🙏

@Decodebd

3 жыл бұрын

Most welcome

helpful tutorial sir 👍

@Decodebd

3 жыл бұрын

Keep watching

Hello sir… how do you add roof truss loads in ETABS… since I’m in Bhutan 🇧🇹, all the houses here have roof trusses with sheets so could you explain how to add those roofing truss and sheet loads on the structure in ETABS?

Thank you so much sir

@Decodebd

Жыл бұрын

Welcome.

do you have an example for unreinforced masonry walls design in etabs...? thanks

Masha Allah

I have purchased the the excel package and iam so thankfull, can you please tell if i can use the loading which it in IS code to design per ACI as they are provided in SI units.

just wanted to know if it is ok to have a center of the diaphragm outside the asymmetric building plan after assigning the floor diaphragm in etabs model? How to solve this if this is an issue?

Thank you so much sir for such a great teaching I'm not able to reach at your site please provide other link so that I can connect with you. I really would like to have that full excel sheet of yours. Thank you

want to know if we can model two way slabs in etabs with triangular and trapezoidal load distribution to beams

Very nice tutorial

@Decodebd

3 жыл бұрын

Many many thanks

Awesome.

@Decodebd

3 жыл бұрын

Thanks!

I hope u making video about fence design .

did torsional constant always same as moment of inertia 2axis and 3axis?

Great work!! Please also make a video on shear wall design

@Decodebd

3 жыл бұрын

Shear Wall design tutorial is already available check here- kzread.info/dash/bejne/gqaqlayul82ekco.html

@m.shaihanayub7179

3 жыл бұрын

@@Decodebd Thanks.

love and respect from pakistan

Hello sir, I watched your videos on Protastructure Modeling also, I have both softwares, Please tell me which one is better btn Protastructure and Etabs?

can you please show how to model a two story bunglaw made of unreinforced masonry walls

Hello, i want ask, when i to restrain reaction, why i can't set tabulated for plot type of reactions?

Need help, I modeled 4 story building w/ concrete frames & slabs. I ran the design/check analysis w/ ACI 318-14 code. At the upmost story, the joint shear check/design & the (6/5) beam/column capacity ratio value is shown as N/A with notes : N/A: Not Applicable N/C: Not Calculated N/N: Not Needed Why the value is shown as N/A? What are those notes mean in particular? and How am I supposed to fix/handle them? I've been a while on the internet but nothing. Is there any specific reference regarding those issues?

What heppend if we dont use 0.7 0.35 etc. For designing beam and columns in. Etabs is it necessary to use these values or we can design with all values as 1 ..pls reply

Sir, IIT is very much thankful for the way you teacher the analysis in etabs.I want to know that initially you advertised about the excel sheet and others on payment. Can you intimate that how to get that for me. Thanking you ,

@Decodebd

Жыл бұрын

Mail me at humayun.afec@gmail.com

Hello sir !Very good and beneficial tutorial. if u don't mind, can I get the excel sheet that you showed in your tutorial?

Can you give design steps for individual eccentric footing with foundation beams enclosed in it & combined footing with one column eccentric and other with axial load with beams enclosed????? I think you got my my question right if not then comment below......

Bro plzz make a video on basement wall design

Please make a vedio on load pattern define.. Defining about self weight multiplier.. Which we should take 1 and which one we should take as 0..

@riyazulhaque2675

2 жыл бұрын

If anyone know exactly what to use.. Please cooment..

You are not providing the floor finishing load to the slab and balcony that you have provide later at the time of F3 modeling. Can you please explain why is it so. I am very new to structural design and preparing for the interview.

Sir kindly upload stairs design as per ACI provision and codes.

in area spring property wheather we have to select compression only or not???

We don't need csi safe for foundation design as we can do the same in etabs???

Very informative but you have designed Everything as per Indian standards

While doing the push over analysis for this model I am getting error like"The P-M-M interaction surface is not convex" Please give me the suggestion for my problem of error in Etabs

Hello sir can you do complete building design tutorial video on ATIR Strap software

Why we stiffness modifiers using on Structural member.

WE ALL LOVE YOU!

This is one of the most helpful video I have ever seen for etabs designing. May Omnipotent Allah have mercy on you. Brother where are you from?

@Decodebd

3 жыл бұрын

Thanks a lot. I am from Bangladesh.

@adamhiwan1788

2 жыл бұрын

Please sir share me the excel

Saying hi from Nigeria. U are so good. I will like to know if I can get these type of Excel files in BS codes.

@Babatunde94

3 жыл бұрын

Hi, I'm also from Nigeria i just started learning the basic structural designs I was hoping you will like to chat more to exchange ideas and such.

MashaAllah, May Allah reward you for such a great effort....Can you plz share the excel sheets

@Decodebd

3 жыл бұрын

Check resource Page of the website decode-bd.com

@emaadal-janadi4911

3 жыл бұрын

@@Decodebd I've been checking but I did not find it...can you plz send it to my email: Emaadaljanadi@gmail.com I'll be so grateful

can we have a similiar video to this designing a mansory building?

Why cover considered as clear cover in etabs v19? As exmpl: beam 25mm cover now but previously 38mm.

Can you share those Excel sheets for design pls..

Sir can you please provide this plan link to download,because we are doing final year project on this type of plans. This is very helpful to us.

Can I pay through any other medium? Like through UPI or by bank transfer since I don't have a credit card. Hope you would help me with this to get the resource

Sir, do u provide offline course...(structural part)

The modelling is better in Midas nGen 2022. They should include the modelling like Midas nGen, it is much easier than Etabs v20

hallo sir, why can't I bring up the load combination in story force. but when I use etabs v.18 I can show it

How to calculate load of structural Glazing with aluminum frame.when we use Structural glazing instead of brick in exterior

Good

@Decodebd

Жыл бұрын

Thanks

How about the wind load and seismic load?

I am not able to find support tab after column placement

Sir will I get these materials if I join your fan membership? I have been watching your youtube channel for a long time..thank you.

pls upload same building design detailing in CSI details v18 sir.. Thank you..

how to get the xcell sheet that is used in this video......

i need the excel sheet how to get ..?

sir why you have unchecked Fz for footing design?

hello sir, does the rcc building design aid zip file contain all the excel sheets that you have used in this tutorial?

@Informationpoint14

3 жыл бұрын

Hello sir! Does you have bought this Zip file? If yes then plz can u share me my email: bilalmani100@gmail.com

Where can i get all building structural elements design excell sheets of IS CODES?

Dear, how can i get excel sheet please. i really need it.

where can we get those excel sheets from?

Sir, please do the same project footing design in safe

@Decodebd

3 жыл бұрын

Noted with Thanks.

How many stories it is allow to design?

HELLO THANK YOU FOR THIS VEDIO . PLEASE SEND US THE FILE OF ACI

Sir plinth beam kaise design hota hai etab main plz explain

i need so much this version if can please send

Can you please upload one for Steel framed Building design in ETABS?

@Decodebd

3 жыл бұрын

Will do in sha Allah.