Leaking Kuppet washing fix
Автокөліктер мен көлік құралдары
Found where the agitator (pulsar) was cutting into the floor of the washing machine causing a leak. The previous owner did an epoxy repair on the bottom but didn't know the real problem. So I used FLEX PUTTY to fix it. Will do a follow-up if anything changes.
Пікірлер: 10
Thanks, this helped me unclog my drain, was trying to figure out how to remove the washing disk
@jetzombie
5 ай бұрын
You are welcome, glad it helped.
Hi, I don’t have the same issue but the rotor on the inside isn’t moving the belt, nothing is spinning. I’m not sure how to fix it, what do I do?
@jetzombie
Жыл бұрын
Check and see it the bearings are fused and cause it not to spin. See if water has gotten into the bearing and rusting it out.
What's the thing to fix it plz I have same issue I just got ,but all the water goes to drying side and washer not hold the water big issue
@jetzombie
Жыл бұрын
I use flex paste and spray.
This is not what I'm trying to find out I'm trying to figure out what the green wire the White and the black wire for the power cord stand for ground or hot each of them
@jetzombie
11 ай бұрын
Green ground, white neutral, black power that is what it should be.
Are you from n.c
@jetzombie
Жыл бұрын
Why may I ask?