👍 started doing residential HVAC about 10 months ago. I work in Arizona and the heat and humidity this summer has been brutal, but I'm powering through it and learning every day

unfortunate that manufacturers can't seem to solve the leak problems in coils, but you handled it well 😀

I’m really impressed with the attention to detail you take when cleaning those units. It’s very obvious that you take a lot of pride in your work and it shows! Watching how you do things makes me realize I need to step my game up on my maintenances. I don’t really enjoy doing them, would rather run calls or swap out equipment, but I still do a good job. But I’m definitely not using a brush and scrubbing down the units and with that particular Trane package unit, I don’t think I’ve ever cleaned all the leaves out of the top under the condenser fan. I do clean the coil but you’re going above and beyond and that’s exactly how I want to work as well. You have inspired me to start going the extra mile on my maintenances! Even though it’s not my favorite thing, I owe it to my customers to go above and beyond what other companies are doing and always give 110 percent!

@vincentgelles3805

7 күн бұрын

👍. Great work as always!

If you ask the home owner for some hot water and fill a 5 gallon bucket half way then put your tank in it while your doing pressure and vacuum you'll have no trouble putting in the full amount of refrigerant the unit needs. 👍

@Toni-ght

7 күн бұрын

Or you just buy an electric heatbelt ;) Cheaper and no water everywhere. Very efficient when you do recovery and when you’re charging ;)

@lucianoandsonshvac

7 күн бұрын

​@@Toni-ght Not sure about cheaper 😅 But sounds nice for recovery. 👍

@jhatfield2755

6 күн бұрын

I just add fresh refrigerant weighed in

@T_cole_g

4 күн бұрын

Or you don’t need to buy anything and just use your recovery machine to push it in

@lucianoandsonshvac

4 күн бұрын

@@T_cole_g never heard of that. Guess the condenser coil becomes the tank and the refrigerant tank becomes the condenser needing to be recovered. 🧐

👍👍 To be honest, I don’t know how you manage to do such a good job every single time. Very well done

Thanks for the tip about unbraiding a joint. You make it so easy. 👍

👍 Hey man I'm 22 and love your videos. They have definitely helped me become a better tech, I am looking forward to owning my own business in the future but I still have a lot to learn. Thanks for these videos!

I watch you all the time to help become a better tech myself! Love the videos and how you explain what you’re doing!

👍🏽 just got into HVAC not to long ago in school and tell my instructors all the time about your videos

I really enjoy watching and learning from your videos. Your attention to detail is much appreciated and I appreciate your taste in high quality tools. Please keep up the good work!

Every time I watch your videos I want to buy more tools😂 love the channel brother, keep up the great work!🤘🏻

Hey Zack I’m in the hvac industry as well, up in Manitoba Canada want too say your doing some good things very thorough procedures I like your style keep up the good work buddy!

👍🏽when I first started doing HVAC 3 years ago I started watching your channel and have learned a lot from you and for that I thank you!

👍 love giving the system a wash while pulling a vacuum , I personally don't have the beat vacuum set up so I have quite a bit of time to kill 😂

👍🏼 Another clean and professional quality job... keep them coming 👍🏼

👍 Trane package units definitely the easiest to work on currently.

Just got into residential HVAC back in January and not only have I learned a TON about the business and troubleshooting but also staying organized. Will continue to support you for a long time to come. Take care and stay cool!

@Bryan-Hensley

6 күн бұрын

I got into residential HVAC in 1988, get out now and get into industrial. You'll never make great money in this field without working extremely hard 24/7. You'll be like this guy, making KZread videos in hope you'll make some more money. I own rentals too or there's no way I could live relatively comfortably.

👍 Great video as always. You have the cleanest set ups with your equipment and tools. Making it look easy out there. Be safe everyone in this summer heat. 🤜

Enjoyed the coil change out. Very professional done.

👍👍👍 Love the channel Zach, great work! I’m in East Tennessee myself, you represent us very well😎

👍🏾 I’m not the only one who leaves the van doors open during an install

Love the content. Very professional, organized and clean work.

👍 Nice work! I agree these micro channel coils are a problem. I find a bunch of them leaking as well.

👍 awesome video makes me glad I do commercial, no bushes on a roof 😂

👍🏿 I’m new HVAC tech. I always learn from your videos.

I'm trying to get my son into your business as shown your videos You're grabbing his interest Thank you

I know business is picking up here in west tn, mostly light commercial HVAC and refrigeration. Love your vids and keep up the good work. 👍

👍🏾Just watched the video! That was like a dream job! It never seems to happen that smoothly when I’m doing it!😂😂😂 Great job though!

That was an excellent job sir. I do love your smooth welding work. We often look for an alternative since the tools are extremely expensive or not available.👍

Started HVACR a few months ago, and it changed my life. These videos have been my savior. I've learned so much from you. Keep doing what you're doing, man! 👍 💯

Thinking about getting into the trades myself been following my father in law around on jobs to learn the ropes 👍🏿

Great service buddy love watching I’m a tech as well in Montreal Quebec been learning much with you

Love your videos I’m 18 years old about to turn 19. I’ve been in the field full time now for one year doing service full time running my own truck by myself. Learning so much so fast and watching these video aid me daily in being a better tech. Thank you!!!

Thanks for all the hard work you do for your clientele and your KZread viewers. We appreciate you and what you contribute to the trade!

Great job Zach has always.

👍. That infi-con scale has a Very nice Display ! 😉😉 Very easy to read. i'm going to have to look into the price of that scale. a Tip For You -- to make un-sweating a Joint easier when replacing a component with extra tubing hanging out. 1) Just Snip out the Part with Side cutters a few inches from your un-sweat joint. that way You can remove the Part & Get it out of your way to just pull on a just a Few inches of copper rather than pulling on an entire component. 2) spread a little white brazing flux on the joint BEFORE un-sweating the joint. it thins the silfoss and makes it run easier & also cleans the Joint for re-assembly. Worth its weight in gold trick. Well worth the time. 43 years of sweating joints here.

@OcRefrig

7 күн бұрын

Great video !

Great job I enjoy all your content to keep my knowledge of of HVAC refreshed

Great job as always, you make HVAC look easy and enjoyable at the same time. I’ve been watching for about a year and you always have quality content and quality work!

👍 You rock Zack still hanging in there doing my HVAC career . Again because of your content is why I'm here doing what we do.

You are 1 of the reasons I love residential HVAC thank u for your content

excellent job Zack. I share these videos with my students to reinforce what is said in the books and what is done in the field.

Good work! The way you’re able to take your time and move with intention makes me want to work for myself. 👍🏻

Always enjoy your quality work 👍

✅ great videos, love seeing a professional do high quality work!

You always go above and beyond for the customer, I respect that. 👍

Nice professional repair and clean up

Your knowledge and organizational procedures/ habits are great to watch !!!

Love your videos bro! Keep up the good work 👍🏼

great video! Have yet to change out a evap coil on a res package unit. This video gave me a good look on how to do it. 👍👍👍

Putting that work in!!! great video! 👍

👍 Starting in business, in Puerto Rico learning a lot from your channel, thank you.

Great job, going above and beyond and doing the extra cleaning will make a customer notice the efforts.

Nice job, neat and clean.😊

👍🏻 as always a pleasure watching the videos!

Good morning Zach and thumbs UP!

👍 The way you do every detail reminds me of me. Great way to represent our industry!

👍🏻 great video! Keep the grind up! HVAC tech from Florida!

👍🏻 Awesome video as always! I’ve been watching you for a while now and always looking forward to the next video.

Love the way you work. Your Truck looks awesome.

👍🏼 done one of those a few months ago. Whole lot easier than I expected

👍 love watching your video while on lunch.

👍👍 Your process of truck organization to job flow is helping me find my own rhythm! Details Matter!! Stay in it!!

👍 fastest package unit coils to change out

👍 Great content. Always enjoy your videos 👍👍

You have the skills to pay the bills. Love watching your videos. Keep up the awesome work.

Yes sir, quality and organized as always I love watching these as a young hvac tech/install, I’m 18 entering my 4th week with Hall in Va, keep it up sir 👍

I've always admired how clean your work is, man. Patience is key. It's my first year in business here in Texas, and it's looking good. 👍🏾 great videos.

👍🏼 keep up the outstanding work man! HVAC for life!!

Love your videos Always inspiring me to be more organized and near in the job site 👍

👍Great video as always. Just getting started in HVAC and videos like these have helped me a lot.

👍 Awesome video! Learning a lot from your videos.. Thank you

Your 😊channel deserves more subs. Keep the content coming

Thanks for all the videos

Great video as always!

Quality work for sure 👏

👍🏻it always good to see your video and learn 👍🏻

👍🏼 Clean Work Bro, wish we had more units like that here in Houston lol

Currently going through a trade school in TX for HVACR, and watching your videos keeps me motivated and encouraged to get through. Keep up the good work man!👍

👍 super clean repair ! Zack is the best

👍🏻 great videos love watching them!!

👍🏼 great video man! You’re motivating me to start filming all my jobs I do throughout the day. From normal maintenance calls to no cool/no heat calls & part replacements. Definitely going to start filming it soon!

Well done Zac, a nice neat and tidy job 👍 Au

👍🏽 Liked the video as always while enjoying a good lunch or dinner

👍 Great work brother, keep the videos coming.

Great Job! Nice professional repair and clean up 👍

Nice work! I like that you do all the little things to make sure that repair lasts a long time, assuming the new coil does lol. 👍

👍 I really enjoy your detail on your work. I’ve been in the trade and working on getting out on my own.

Good video did the same repair yesterday 👍🏻

I love when you flow the nitrogen. Really shows you care about doing it right! Thanks for posting. Great videos

Awesome videos man. Keep going👍🏼

Nice work as always! 👍👍👍

Nice quality work 👍

I’ve been doing commercial work for 7 years now. Really considering going out solo since I started watching you. Love your stuff man!

Impressed with your service equipment, you are the most professional HVAC tech that I have been watching.

👍🏽 awesome video, been changing out Lennox package unit indoor coils here in the southwest.

👍great job sir,i'm your #1 fan from the philippines and current working here in qatar as ac technician,i've learned a lot from you,i wish i would be the one that you will choose,keep up the good work and stay safe always,

Really enjoying your videos, really entertaining and educating. Will really appreciate the tool and a snap hat 😅😂

👍 Strong work as always!

i like the idea of the micro channel coil but they ALWAYS leak. also genuinely shocked you dont use a purge regulator for brazing that you just raw dog it lol good video very entertaining 👍

👍 keep up the great work, saw you on the cover of hvac tactical from a copy at the supply house.