Thanks for the video, exactly what i was looking for.

@walthersonr.c.3360

4 ай бұрын

Thank you for watching,

Big tip, trim a single coil off the front of the shocks. Itll handle alot better. Also after you put in a Aftermarket gyro, if you havent already, slap in a surpass 9g steering servo. Its plug n play and is a ton smoother.

@walthersonr.c.3360

4 ай бұрын

Hello I sorry I just responding, the material is too brittle to try to cut the springs because it’s 3-D print

Can you show how to change the wheels. Im having trouble swapping out the front. It feels like its stuck on & ill break it trying to take it off. I managed to slide the rear wheels off just fine. Can you show how its done with out brute force almost breaking it. Please. Thanks.

@walthersonr.c.3360

3 ай бұрын

Hello and thank you for viewing, unfortunately if your vehicle has the plastic hubs in the front, they are hard to remove , you can try to sanding lightly with a 1000 grit sandpaper on each side, or upgrading to the metal hubs they are about 3 / 4 dollars on AliExpress

@pmilitary047

3 ай бұрын

@@walthersonr.c.3360 I finally managed to change them out. By taking off the body and the suspension arm links and leaving the bottom ball joint on to remove the wheels. Yeah they are plastic hex. Thanks. Could do with a metal upgrade.

@pmilitary047

3 ай бұрын

@@walthersonr.c.3360 do you know the exact size of the hex hubs? I could do with upgrading them to metal like the back.

Where did you buy them?

How you like the car so far just ordered one

@walthersonr.c.3360

Ай бұрын

Hello, I love the Rx7 , AE86 and the one I had to modify, the gray one, they all run and work very well and it seems like the newer the model the better it is, the passenger right rear suspension on all of the kits is a little goofy Meaning, you’re gonna have to play around and adjust it to get it to work properly but for the amount that they’re charging, you can’t beat it. thank you for viewing my channel and I will try to air a few more videos soon.!

How do you remove the suspension pens?

@walthersonr.c.3360

Ай бұрын

The front pins need to be pushed out from the front of the vehicle to the rear very carefully, the rear pins need to be pushed out from the rear of the car to the front very carefully while holding the mounts! as you start pushing them out, you will notice the pen has a textured in on it!

@justaxelrod

Ай бұрын

@@walthersonr.c.3360 Hi, thanks for the reply. What tool do I use to remove the pins? If possible would you be able to make a video on how to remove the pens and install the shocks?

@walthersonr.c.3360

Ай бұрын

You are going to need a small punch or something to push it out enough to grab the rear with pliers!

How did you manage to pull off the the bars????

@walthersonr.c.3360

4 ай бұрын

Hello , sorry I am just checking your messages, be careful trying to remove the suspension pens !!

@MooseRidez

4 ай бұрын

I used a small allen and pushed it through.