While it's always a joy to watch the magic Chris can do on his own, it's also a treat to see what a well coordinated team can do, working together.

I was impressed. The explanation about how they kept it all in alignment and the groundwater wrap was interesting and informative too.

Impressive project Chris hat off... I worked for 41 years in the PVC Drainage pipes in Holland but this is great buddy!!

I could tell right off Chris wasn't the operator by the state of the counterweight & the broken mirror. Oh & the machine being a Deere. 😁

@bigchuckyinkentucky6267

2 жыл бұрын

I'm surprised that he would even associate with THOSE kinda people.

@GARDENER42

2 жыл бұрын

@@bigchuckyinkentucky6267 🤣

@kennethhume8628

2 жыл бұрын

@@bigchuckyinkentucky6267 , hilarious 😂😂

@marcryvon

2 жыл бұрын

@@bigchuckyinkentucky6267 🤣🤣🤣

@ArthurDentZaphodBeeb

2 жыл бұрын

Meh, the dirt doesn't care if the machine is a creampuff or not. Pipeliners never make much money anyway. Cutthroat business.

Looking at all the different types of soil in that pile it is easy to see how Charlie stays so busy adding cement.

There is something captivating about Chris's letsdig18 videos. Even if he's not the operator, the quality and angle of the videos, the sound of the excavator in the background and timing of the narration is just perfect.

When I was working I was a damage prevention inspector with the gas company here in Southern Ontario and I would spend hours and days on job sites like this watching these guys dig if they were close to the big gas mains had to make sure they weren't digging near it this is really interesting stuff it goes on every day non-stop. 👍👍😀🇨🇦

In the early 70s a friend of mine was working on a crew putting in storm drain for a subdivision. He had a bad motorcycle accident but his boss had him doing light duty to keep him working. His job was keeping track of how much pipe had been laid. One morning his boss asked him how many joints he had and he told his boss two. His boss's didn't believe him and asked if he was sure. As he was reaching in his pocket to show his boss he only had two joints, his boss said to him. I know they have put more pipe in the ground than that. My friend realized he was talking about pipe and said oh 13.

@KSparks80

2 жыл бұрын

Apparently, he had 3 in his pocket just a few minutes before this conversation with the boss took place.

Seeing those concrete pipes reminds me that years ago I went on a service call to a company up where I live that made concrete pipes. It was an interesting machine. Also the groove on the small end with the gasket was cut after the pipe was casted and dried. That cutter was the machine I was called out on. Cool to see pipe like this being pieced together.

I love the operator not taking the signals

The last pipe I laid was 78 inch double barrel on I-275 near downtown Tampa. We had trench boxes and laid rock under the pipes. Also, that has to be a 3% slope. Not 30.

@infinitepaul

2 жыл бұрын

The operator misspoke. Chris confirmed he meant 3ft per hundred feet. That's 3%, or 30‰.

@python3574

2 жыл бұрын

lol.... Oroville Dam spillway is probably a 30% grade, that drain pipe is definitely only 3%.

@dennisrogers8107

2 жыл бұрын

Caught that too. 3 feet in 100 is 3% not 30. 30% is WAYYYYY steep for drainage pipe.

@2wwwilly

2 жыл бұрын

@@dennisrogers8107 Down a hill yeah..

@KSparks80

2 жыл бұрын

@@dennisrogers8107 When the water outruns the turd, bad things happen.

So this is what it means about the 'guys in the trenches' these days. Very interesting seeing the process and the explanations and watching another great operator and cool seeing DP there also.

Wow, that is a big old run! 😃Thanks for sharing Chris.😉 Be well.😊

Thank you for creating this video! It was a real joy to watch and remember what a well-oiled-machine (the crew/operation) looks and sounds like again! I found myself immersed in the routine to the point of wanting to jump in on the action myself! I appreciate this video.

Hats off to the crew and the videographer. Love that we are provided an explanation of how this drain works. Makes me appreciate all the pieces that go into making and keeping infrastructure going - from the machines, to the supplies, to the know how to make this happen. Great job!

I've always been fascinated by construction like this. Thanks for sharing!

Charlie has a impressive crew and company in general. Chris you are surrounding yourself with great friends and knowledge.

Two operators just standing around watching others work. Reminds me of Cal Trans here in California. ( Road Maintenance). 10 bosses, 2 workers and 40 winos. Lol. Things are alot different here in California. I also wtch a drain cleaner channel in Australia. Thier sewer pipes are above ground and drain into 12 inch boxes in the yard. The drains have to be cleaned out monthly by a plumber. How gross is that, but watching the plumber is funny at times. Love watching both of you together, how awesome. Keep the great videos coming.

Old soft Charleston ground high water table is right.They did a good job for that time frame Thanks for sharing Chris

Very interesting procedure. Thanks Chris

I got my first taste of storm pipe this past week. These guys make it look easy! Good tips in here.

First time I ever saw a target level being used it was in the centre of the pipe. 2003 in Edinburgh. Never seen one since. Love seeing how other people do it. Great content mate 👍

That had it going on there didn't they..lolol... They was shittin' an gettin' it !! Hell of a system !! You been all over Chris, down at the auctions, hanging with Charlie's crew, and DP !! Man, I'm starting to think you never get any sleep Chris !! lolol... Alright, enough playing around here, time to get back to work on your own jobs...lol... Great as always Man !! Have a Great Evening, and, On too the Next !!

I build storm drain boxes for a living so it's really cool to see how their put in the ground an pipe laid in.

Back when wake forest middle school was being built I worked with a company we laid 575 ft. Of 24 inch drain pipe in the middle of the hot summer time with no shade around

Wow, learning video for sure! Really enjoyed it! Thank u!!! Blessings and stay safe!!!

The fella operating that big John Deere seemed like a pretty nice guy! Knew his stuff and was a decent operator too. That machine could move a LOT of dirt fast! It’s nice to see others and how good they are allowing you two to enter the job site. It’s always a little different depending on where you live. I suspect it can be different from one mile to the next depending on State or County regulations. I’m in Canada so most of the jobs like this are based on a national code. It’s getting better, but there are some really old codes in the “book” that make you wonder why in today’s age. Thanks for taking us along fellas!!!

Hi from uk chris and crews👋 what a awesome crew @ dirtperfect mike does well and its all about each person having that task and knowing other guys thought and being rite place for it 👍👍 poetry in motion watching this 1 great job 👍👍 and like the seep through membrane in place on connections (love your comment too about nudging pipe in with your hard ground "" if I did that I'd have 2 pieces of pipe""😂😂 you know when to drop these lines mate al give you that hope everyone ok up farm cant wait for your big pipe job (need the big pipe now got the pipe need the weather and time job 😬😂) thanks for your time and be safe see you soon👍👍👋

That looks like the area just off highway 26 between Charleston and Summerville SC. Reason being, Crews were working on the area building roads for a car plant and residential growth to relieve traffic pressure off of 26. I lived in that area for 5 years before moving back to Indiana and they were working on that stretch all that time which says they don’t get in a hurry in the south…..lol. Great Video

@davidkettell5726

2 жыл бұрын

Great part of the country , i played a lot of golf down there twenty years ago . Hotter than hell in the spring for us yankees.

Man I miss that kind of work.

This Team works Great together and you obviously have to put Trust in your Crew. They work Safely and Efficiently. 👍

You hit the nail on the head Chris. That's what happens when you get an engineer involved. PRICELESS!

@buckhorncortez

2 жыл бұрын

A good engineer just gives performance criteria that have to be met and not a prescription on how to do it. The contractor is responsible for how it gets done, the engineer is responsible for what gets done. I did this kind of work for 35 years, and never told a contractor how to do something unless they were intentionally playing stupid fishing for a change order. Then I would tell them exactly how to do it and made sure it cost them additional money for being stupid.

@TravisM0143

2 жыл бұрын

@@buckhorncortez I like the reply and yes your are right, but I also work with engineers every day and I think the majority of them got their degree form a cracker jacks box. Also I'm not a contractor, I work in manufacturing that builds the equipment that you guys use. Its a similar process, just a different environment.

@patzeuner8385

2 жыл бұрын

@@TravisM0143 talk to the designers, they do the work and the engineer takes the credit. Worked with one engineer (EIT) that I doubt ever went to class, got to college on a football scholarship, couldn't even spell.

@TravisM0143

2 жыл бұрын

@@patzeuner8385 Our designers are even worse, but maybe that's because we have to work deal with them all the time. I'm and tool and die maker and have to fix their crap every day. All of our current designers came from the floor as some sort of and ME position.

The bells go uphill. Always a teachable moment! Nice looking job. If you 2 jumped in back filling. Charlie would appreciate it. Alot!$$$$

Smoooooooth operation!👍

That was impressive. That site is huge!

Always love to see another man laying pipe 👍🏻🙌🏻💪🏻

@EldineroJay_Fx

Ай бұрын

Ayo?

Those guys have a system! nice!

That is a massive job site thanks for the video Chris

Great video guy’s, love watching.

Like these little tour videos.

I was slamming that good 24" rcp in the ground today,carry on boyz🤘

Yes, the groundwater is typically high around here. I don't often have to dig more than a foot or two before hitting groundwater. Especially during the spring and summer.

@SottileTD

2 жыл бұрын

Great thing is when I was setting posts in my back yard I only needed the concrete! Ha!

Man I think they've done that a few times, freakin fast, thanks for sharing Chris, that was cool

Hi there Chris, I live in the UK, and laid pipe back in the eighties, we would over dig 3 or 4 inches, lay down a bed of pea gravel, if we were high the bucket would give the pipe a wriggle, if low lift and pack under, the pipes were 12 metres by 1 for fresh water metal and welded, levels taken with a traveller.

It's amazing the extent of development to meet population movement and living. Interesting how ground water can pass into the pipes. Good lunch break entertainment on way south.

Things have changed since I was doing this.This size pipe was a three man job:: operator, pipe layer and top man. Of course no lasers or wide ditches either and then infiltration test. Looks like a great improvement over the 60s! Thank goodness.

@aaronmoore5552

2 жыл бұрын

Most people still run 3 people like you said. Bank man, pipe layer, and operator. Some people that do 4 have a guy that backfills and packs the ditch. He’s got a high water table probably needs extra help running pumps or whatever.

Love watching you guys doing vidgas!

I love how you two are wearing hardhats but not the guys in the hole with an excavator and concrete pipe flying overhead. 😂

@TheWilber09

2 жыл бұрын

Wouldn't do any good anyway.

@billfenner7084

2 жыл бұрын

Well every little bit would help.

@jefferyyoung6836

2 жыл бұрын

Most trench men don’t wear hardhats because every time they bend over to look in the pipe it falls off.

@jaytee8188

2 жыл бұрын

I expect they haven’t invented chin straps there.

@dans_Learning_Curve

2 жыл бұрын

@@TheWilber09 a hardhat might keep a bolt from hitting your head. A concrete pipe, NOPE!

Whole different set of safety rules here. Hard to believe it’s the same country.

@GARDENER42

2 жыл бұрын

UK elfin safety lot would be in a tailspin...

@941haggisbasher

2 жыл бұрын

It’s all good until the spoils fall back into the hole trapping someone. No bench sloping or keeping the spoils 2’+ away from edge of excavation…?

@richardschipper5989

2 жыл бұрын

@@941haggisbasher what are you talking about, it was benched and the spoils was as far as the machine could throw it

Learn something new everyday Chris. Something you might need to know down the road

I like how you hold the bucket on top of the guys head to give them some shade,😅😅😅

Did he mean 3% fall not 30%? 30% in a 100ft would be 30ft of fall. Or am I missing something?

@natedoerfler652

2 жыл бұрын

That's what I thought??

@marcryvon

2 жыл бұрын

In Canada too. The site would be closed real fast.

@cree5433

2 жыл бұрын

3% is 3 feet per hundred. You are correct. 30% would be 30’ per hundred.

@mitchrapp2556

2 жыл бұрын

Has to be 3%

@justinfufun5483

2 жыл бұрын

@@marcryvon Ireland too. In fact this is typical of the sort of video they show at a safe pass or machine operators crane operators course general operative. How many violations are there. How should this be done. Can you flag the hazards. How would you improve this work place.

Made for good viewing bro. Safe travels

The laser makes it look like a riffel barrel, a good feeling to have at the end of the day!

I have done MSD sewer line before with a pipe laser. It's neat how that works but the light test and mandrel test is where it can really get you. The light test is a light at one end of the pipe and checking for a perfect circle of light on the other end. The mandrel is a long piece of pipe that they pull thru the inside of the pipe you laid to make sure it's full round and you haven't had a pipe crush or drop off the bell of another.

That last stub of pipe at the box was an amazing fit.

@patzeuner8385

2 жыл бұрын

You cut and set the stub into the box prior to setting the last full section. That usually gives you between 18 to 36 inch gap to be able to slide the stub into the last full section.

That was awesome.. Thank you for sharing..

See that's what I'm talking about , that's my line of work , great video man

OSHA would love to see those banks.if it caves in it's over son!!!

That’s interesting to use a storm drain system as a French drain as well. Guess it makes sense with a high water table, but don’t think I’ve ever seen that set up in Maryland, especially wrapping every joint.

@mjcox3410

2 жыл бұрын

Here in Souther Cali we grout every joint from the inside unless it comes with a specific rubber that makes it water tight

pipe laser is the best tool just line up your points and set your percent and it’s a no brainer, gives you your drop and keeps everything straight, couple good guys in the trench and you can bang out some pipe quick, great video.

Some damn good crew on the pipes man. Them boys will be well paid 👌

Wow, it’s amazing we noticed that the two guys with the hard hats are out of the ditch and hazard area but those in the ditch and hazard area have on the baseball hats!

Chris thanks for sharing! Kevin

Great video. They looked like they were working good as a team. Only 2.5 days to do 750ft. Take care & cheers 🐨🦘🥰

Also as a guy who’s been in the ditch using a target that would later be check by remote control car a good operator makes such a difference and thankfully guy digging for me was awesome and kept me safe we put 1600 feet of 18” storm sewer in and some place were at 12-15 feet deep felt like I had my own ac system keeping me cool in the ditch

Excellent video , extremely interesting . 👍👍🇬🇧

Great video Chris 🇺🇲

Nice work. Was wondering what the tolerance is for laying storm drainage. I assume it is not as stringent as sewer pipe. Did this type of work in the early 70's and, because we had to dig up and redo a considerable amount of sewer pipe, that particular requirement stuck with me. I was a laborer not an operator.

That is one huge operation.

Thank you.

Love doing storm drain.

Did Charlie help you get access to this project?, glad you and DP could show us how stormwater drain pipes go in. MSHA would not allow workers down there without shoring but we know that is South Carolina.

@TheXxneowolfxX

2 жыл бұрын

OSHA. MSHA is for mining.

@mfreund15448

2 жыл бұрын

If the depth is less than 5’, and the soils are judged stabile, a trench box is not required.

@danbaker1014

2 жыл бұрын

If you look closely, the trench is over 10' wide and benched.

@Benson_aka_devils_advocate_88

2 жыл бұрын

@@danbaker1014 even if that's class a soil they don't have a 5 to 4 bench. And that spoil is right on top of them. Width doesn't mean a thing. If the wall is over five feet it needs some type of shoring.

@rustysteel8714

2 жыл бұрын

@@mfreund15448 ....and hope you have a good "judge"? 🙏😉

Those ole boy's def trust their operator

Cant wait to be able to play in the dirt again. Construction season is still a few months away for us.

Amazing all the things I learn by watching this channel. Only 2 min in and my desire to get a skid steer increases. Only because used mini excavators still cost 40k+ unless it was fire damaged.

This crew is a well oiled machine!

Daen interesting vid Y'all. A whole Lotta pipe put in and those guys sure look small in that hole. The excavator operator sure looks like he was trained by Chris. Thanks for finishing off my Sunday night before it's lights out for me.

Welcome to Charleston Chris. I live here.

That work crew is running like a well oiled machine. Good to see because you don't see that much anymore.

Those pipe guys are hustling, no slacking there!

The rubber gasket in the joint seals the pipe. The fabric is in case the rubber was damaged during installation and is then relied on for sediment exclusion.

Talk about well oiled machine... damn. Those three guys could keep the world turning for a long time. That Deere was putting in some work too. I know you have a Volvo fetish Chris, but the American makers have decent offerings as well. Good stuff.

Love laying pipe. 💙

Admittedly, I know nothing about this type of operation. I am surprised that I see only the boss folks wearing hard hats. I guess it's a personal choice type of think. I can imagine NC heat and hard hats don't mix well. One tickle from that shovel or a pipe could crack a skull, though. The trench guys seem to be real good at staying out of the swing path of the shovel, but if they weren't they wouldn't be there long. Very interesting operation. Such a great channel!

Nice video, thanks

720 feet of drain pipe. Wow that Deere was moving. Thanks Chris.

Amazing.

Not used to seeing holes quite that deep and narrow on your channel. We dig a lot of those in Canada since our frost line somewhere between 4 and 6 foot depending on the area.

Chris , you are one hell of a operator, love watching all that you do !!!!!

That was impressive.

Trolless zone. Super Chris :-)

Hey Chris & Mike !! It's always an ""ADVENTURE "" when you 2 get together !!! HAHA Have a good week & ON to the ""BETTY "" & her boyfriend ""ADVENTURE ""!!

Where I live they have irrigation pipe that is so old it's made from wood, sort of like barrel stays, the reason I know this my boss at the time busted one with a backhoe

I get to learn something new today. Laser going down a pipe.😐🤨🤔👌

well oiled crew!

Another great video Chris that was my job for the last 15 years that I worked, laying pipe and to tell you the truth I hated it it was the most boring job on the whole site but my boss paid me damn good money per hour to set up an excavator and dig that trench and put that pipe In it.

Like this one too .

GOOD ONE, KEEP SAFE

Fascinating. 😳