Very good video. I have just bought the Benz version and this has helped me understand it more. I thought for resetting things like oil for example after a change you had to purchase it from the store but it’s all in the diagnostic section. Thank you 👍

@dorisavvai6617

Жыл бұрын

Can you code fuel injectors on benz with your device?

can it reprogram a new DME to accept old key for engine swap? or Sync the EWS with new DME?

Hey bro question, should I buy this one or the new X431 version I want to see if the accumulator special functionality is the same

Awesome! I am getting this

@WildDigger

Жыл бұрын

Got one and at a great deal. During Amazon days last weekend and had a additional $20 off I picked it up for $96. Lol. It works great.

Hi, got this thing to scan for error codes & personalize my lights (use angel eyes as DRL). This is Canadian car (2009, 323i only sold here) its basically a 328i base model with 2.5L. N52. I dont see options in menue of coding, does this mean its not available for me or am i doing something wrong?

Thank you for posting this video. I am a new subscriber to your channel. I just purchased this tool from Amazon and your video was very helpful. I do have a question. On Amazon it shows that the device can be used to program remote keys. I did not see anything in the user manual about this function. Can you help? I have a 2012 335i retractable hardtop with only 40k miles.

@SimpleCarGuy

Жыл бұрын

You should see IMMO. That will allow you to register already programmed key. This will not program a key. You can also assign different values to the key, make it primary/secondary etc.

Ended up purchasing one of these devices and the touch was way out of place. I had to press the shift key to hit Q. However, after updating the system not the "upgrade" menu, this was completely solved. Go to Settings > About > Version and then Detect system update.

is there a launch diagnostic toll specifically for mercedes benz that can read from old merc to the latest?

Can you code a new airbag module with this?

Can it do a adaptation value like o2,,idle actuator..throttle actuator,,catalyst adaptation?

Can bleed water pump for cooling sistem for bmw f30 20 diesel???

Can i can activate video in motion feature if yes plz letme know the location in settings for bmw f30.thnx

Does this scanner do mileage correction on bmw m3 2008

Great review. I subscribed. Same question I asked you on your other review (Foxwell NT710): will it show me the codes on Hall sensors, microswitches etc on the convertible top on my 2004 E46? You answered that Foxwell will. Thank you in advance.

@SimpleCarGuy

Жыл бұрын

Welcome to the channel! If the BMW scanner says it’s ‘full system’ or if you watch my videos and I say the scanner can ready ALL modules, it will show codes and live data for your convertible top. The only difference you’ll see is if it adds actuation testing (bi directional) or coding (changing preferences on the module. If it’s not full system, I’ll say something like “will read modules on ‘these (ABS, E CU etc.)’ systems”.

@marknoir

Жыл бұрын

@@SimpleCarGuy thank you. It’s on sale on Amazon, half of Foxwell.

Do you have any idea if it will allow you to do the programming for the traffic jam assist?

@eddy2561

2 ай бұрын

Around here the WAZE iPhone app is supposed to help with problems ahead...I haven't tried it yet.

Can this tool programm a fuel miduke for 328i bmw

Can it show Live data from sensors like a camshaft sensor? Ta

Yes you are ! I still have my 1st do you like it or they pay you

@SimpleCarGuy

Жыл бұрын

I liked this scanner. They did not pay me to review it

hey. nice video, wanted to ask if it can disable the speed warnings at 80kmph and 120kmph in the car.

@kwintberg

2 ай бұрын

There are some settings in the car on the CIC without the need for this device.

Can it reset transfer box after a oil change.

Can I use it for 1996 528 ???

Would this be worth getting if I already have the FoxWell NT520? I use it on a 1998 528i.

@SimpleCarGuy

Жыл бұрын

Probably not for a 1998 year vehicle, those were still fairly limited in what they offered through OBD2.

@reinikesretro

Жыл бұрын

I've noticed I needed the 18-pin adapter cable to plug into the port in the engine bay. After I got the new one, I found one in my box o' diagnostic crap lol

Also bought this device, works great for troubleshooting but cant get the coding to work… as for example i cant get the CIC to open keep getting an no coding data error. So might be better of with the bimmerapp…

Can it reset the EWS?

Can you add a new port and get the computer to accept it from desk device????

How do register the battery?

Hello. Can you help with the coding/personalisation? It does not work for me. Some waiting and then it just fails “data error-coding data check” Thanks

@SimpleCarGuy

Жыл бұрын

Hi, is your car in the accessory mode?

@taurus7228

Жыл бұрын

@@SimpleCarGuy hello. I am unsure whether the F20 has an accessory mode. Lemme know if im mistaken. Thank you

Good for Mini as well? I need to reset my vanos adaptations

@SimpleCarGuy

Жыл бұрын

Yes, works on Minis also

@jmwkart2

7 ай бұрын

Did you get one and did it reset your vanos adaptations and able to update DME? If so does it show the target and actual vanos adaptation values ?

Hi can this reset frm module on bmw e90 320d. Short circuit error

@SimpleCarGuy

Жыл бұрын

I'm not 100% on the FRM module, but I just used it yesterday to reset the convertible module on my Z4. So, if that functional is available in the actuation testing, then yes.

hi do you need an internet connection to use in the car thanks

@SimpleCarGuy

Жыл бұрын

Hi, no the internet connection is not required to be used, only for updates.

Can this be used to code things out? Let's say disabling the auto-leveling headlight to remove the warning? Or disabling tpm's

@patricioaguayo9088

Жыл бұрын

Christian,did you find what you were looking for

@cristianconstantin6496

Жыл бұрын

@@patricioaguayo9088 I wasn't able to. I'm trying to code my car on the cheap

@SimpleCarGuy

Жыл бұрын

No, this one will not code things out.

@cristianconstantin6496

Жыл бұрын

@@SimpleCarGuy sad, thank you. Do you have recommendations for a coder?

@EllershawJBilly

Жыл бұрын

Yes it can code.

Pls buy thinkdiag 2

Can this do injector coding on bmw

@LePetitCosmonautehaitien

12 күн бұрын

Yes it can

Didn't work for battery code apk failure

Hello. Can you tell me how to register?

@SimpleCarGuy

Жыл бұрын

What are you trying to register?

Does this have to be connected to the internet when using in the car? If so, that's a deal breaker.

@SimpleCarGuy

3 ай бұрын

It does not have to be connected to internet. Only for updating or if you'd like to share reports etc.

@Sonya_Makepeace

3 ай бұрын

@@SimpleCarGuy OK thanks. I've ordered one for my Dad as he likes tinkering with cars. Another You Tuber said it needs an internet connection for it to work, so the car has to be near a wifi point or it has to be plugged into a phone.

does it do Live data?

@SimpleCarGuy

Жыл бұрын

Yes, it does.

@markt9438

Жыл бұрын

@@SimpleCarGuy Thanks looks like a winner

@SimpleCarGuy

Жыл бұрын

It’s a pretty good scanner for the money!

je ne vois pas l'utilité car ça voiture est neuve.

can you see the values ​​of the injectors on diesel engines?

Can this program a new key?

@SimpleCarGuy

10 ай бұрын

Not a new key, it can register a preprogrammed key though

does it work without internet connection?

@SimpleCarGuy

8 ай бұрын

Yes, it does.

@juanignaciocaino

8 ай бұрын

@@SimpleCarGuy Thanks. I'm wary of Launch because they left me hanging with the very convenient to haul around Easy Diag. they just inhabilitated the device to work after the support period. And it didn't work w/o connection so it was really useless while on actual trips and such, where you need a easy, portable scanner the most.

For bmw only?

@SimpleCarGuy

Жыл бұрын

Yes, it’s make specifically for BMWs. It will do regular OBD2 functionality on other cars, but not any of the specialty stuff like reading modules or service functions.

@patricioaguayo9088

Жыл бұрын

Ekpms3 module. Can't get an answer from the site. I need to replace this module,but apparently I have to code it. And register battery. Who wants to get stuck with something you can't use. Thank you

@patricioaguayo9088

Жыл бұрын

@@SimpleCarGuy hello car dude. Can this thing scan my new ekpms3? And register my battery? Thank you

Can it do coding?

@EllershawJBilly

Жыл бұрын

Yes it can.

@whateverrrrrr123

Жыл бұрын

@@EllershawJBilly thanks 🙏

Swapped tranny, can this device program new tranny?

Pricing?

@mcplutt

Жыл бұрын

low

@agilbert314

Жыл бұрын

@@mcpluttMore than 300 USD isn’t low for an occasional DIYer.

@mcplutt

Жыл бұрын

@@agilbert314 Why do you have to pay almost double price?

@SimpleCarGuy

Жыл бұрын

Sorry, I didn’t see you comment! It’s $150 on Amazon.

@agilbert314

Жыл бұрын

@@SimpleCarGuy Not on Amazon Canada !

I would stay far away from this scanner .of the 3 companies I have used to code my 2015 535i. This is the only one that has not been able to. I emailed the company 3 times, no response.

@alonzojohnson7563

Жыл бұрын

Blue driver tops

@JakeEarp

Жыл бұрын

Yeah this one is going back for me too. Allows me to look at the coding menus in my f02 Alpina but doesn’t write/code any of the changes i make. Always gives an error message

@jimmyrikhotso6752

11 ай бұрын

​@@JakeEarpsame with my e65 doent code give me an error, are you sorted

@JakeEarp

11 ай бұрын

@@jimmyrikhotso6752 returned it. I bought bimmer code, OBD to usb-c, and installed ISTA+

@zerocmb5877

8 ай бұрын

​@JakeEarp How did you get ista+ in desperate need of it but cant find anywhere trustworthy on how to get it

Can this scanner put the brakes into service mode which retracts the calipers? Similar to kzread.info/dash/bejne/g4uoutOCdpnLcrQ.html.

Can I code my headlight to my 2011 535xdrive @SimpleCarGuy

Can this program like fuel injectors and other parts too??

@SimpleCarGuy

Жыл бұрын

Yes, it can program injectors. As far as other parts, it depends. Please see the special functions for what it supports.