LaserPecker L1 Pro Review
Тәжірибелік нұсқаулар және стиль
The is a review of the Laserpecker L1 Pro. It's a very portable , app controlled diode laser. I run it through a few tests an see how I liked it.
Use code LASERPECKER for $5 off your purchase on the Laserpecker website.
LaserPecker L1 Pro website (Affiliate):
www.laserpecker.net/?parent_u...
Amazon link (Affiliate)
amzn.to/3s4cDyD
Watch the video on how I use the app here:
• LaserPecker L1 Pro App...
Пікірлер: 52
Great video - we LOVE our Laserpecker!
Ryan, another great video!
Great review! Thanks for all the information
@BusterBeagle3D
2 жыл бұрын
My pleasure!
Mine is in the mail! I’m exited about it! It’s a great business!
How to see the positioning box? Before engraving it should show where it is going to engrave right?
I REALLY like the name
Amazing
would this work on epoxy resin?
Thank you for the video. I have a bookshop and I have this idea to laser engraving books . As you mentioned this one may not work on white surfaces like book paper . Which Machin is the best for my job in 2023 ?
@BusterBeagle3D
11 ай бұрын
There are tons of options for different machines in 2023. It all depends on how large an engraving you want to do. If you want to keep in small I know that laserpecker just came out with a new laser that has 2 different types of beams and I just did a review of a similar machine called the F1 from xTool. Feel free to check out the rest of my channel as I have reviewed quite a few machines that are all different sizes and use cases.
Would this work on a soap bar?
I feel like the humanoid person in this video was emulated by some Ai in a really weird way.
@BusterBeagle3D
2 жыл бұрын
0010010001 Hello World 0010000100
@isaaccp25
Жыл бұрын
@@BusterBeagle3D I stumbled across your video, I make wood pens on my lathe what are your settings to burn in to the wood
@ernieRUOK
Жыл бұрын
Getting Rick and Morty inter-dimensional cable vibes
Is there a developer mode where you can control the laser in real time through an SDK from your own automation software?
@BusterBeagle3D
2 жыл бұрын
Hello, I am not sure. Might be a good question to ask the company directly.
I saw that you did a pencil and was wondering if you could do the clip on a pen. Have you tried that yet?
@BusterBeagle3D
Жыл бұрын
I haven't done a pen clip but depending on the material type you could do it. Metal might not work but darker plastic probably would.
I had that one then bought lp 2 I was able to do more with that one
@BusterBeagle3D
9 ай бұрын
Thank you. Glad it helped.
Would you be able to do a test on acrylic and glass please
@BusterBeagle3D
2 жыл бұрын
The laser would not be powerful enough to do glass. For Acrylic the effect would be the same as the sewing machine plastic that I had in the video. You would first need to use a marker on the surface and then engrave on it.
@stickyprickle
2 жыл бұрын
For glass other diode lasers do etch with the pen technique, that may work? If not then you could cut out a stencil and try a glass etching compound.
@stickyprickle
2 жыл бұрын
actually, on glass use matt black nail polish, laser etch off the desired design then use glass etching compound, wait, removed compound and then remove rest of nail polish and you should have the result you want from a humble 1.5W diode laser
I wonder if this would work on glass using the pen technique and with stainless steel using mustard?
@BusterBeagle3D
2 жыл бұрын
I don't think the laser is powerful enough for those harder materials. Even with the pen or something else it's not enough. The newer version of the machine is but not this one.
@stickyprickle
2 жыл бұрын
@@BusterBeagle3D the isothiocyanates in mustard react with some of the metals (possibly the nickel component) and the laser is just the catalyst and does not need to be too powerful....apparently
@BusterBeagle3D
2 жыл бұрын
@@stickyprickle I'll have to give it a try I guess. I didn't think it was powerful enough.
@stickyprickle
2 жыл бұрын
@@BusterBeagle3D looking forward to seeing how you get on, the brand of mustard and they type of stainless steel makes a difference. Gray poupon has worked but other brands have not !thanks
How do you determine the size of the image you want to engrave ? I'm new at this
@BusterBeagle3D
10 ай бұрын
It's just based on what you want. A good metric ruler works wonders.
@Johnny-xy7en
10 ай бұрын
Maybe I did not explain myself, in choosing a click art/image does the laser shrink it to fit the area to be engraved or do I have to resize it to fit in the approx 4" x 4" area?
Hi, can you cut 3mm clear acrylic?
@BusterBeagle3D
11 ай бұрын
No diode laser can cut clear acrylic. You need a CO2 machine for that.
Is This Good for Business or Just Recreational DIY Use???
@BusterBeagle3D
2 жыл бұрын
It depends on what you want it for business. If you want to add logos, or UPC codes, or barcodes then it might be great. Just remember the burn area is 100x100mm and it will mostly work on wood and other soft materials.
У подставки с автоматическим фокусом, есть очень сильная недоработка- на подложке нет отверстия. То есть, если вы захотите сделать гравировку на большой поверхности, на полу, на столе и т.д., вы не сможете это сделать, придётся использовать штатив, который очень неудобный. Мне штатив пришёл расхлябанным. Пришлось брать отвёртку в руки и подкручивать абсолютно все винты, так как всё болталось и всё равно подкрутив все винтики, штатив хоть и перестал хлюпать ножками и головкой, всё равно очень хлипкий и неудобный. Сейчас ищу сторонний штатив у которого есть центральная ось с помощью которой можно будет поднимать и опускать головку лазера.
could it engrave on a clear plastic cassette case or om the cassette itself?
@BusterBeagle3D
Жыл бұрын
It would not be able to engrave on clear plastic directly. You would need to use something over it like tempura paint or something else to be able to mark on the surface.
@NikoNoxious
Жыл бұрын
@@BusterBeagle3D thank you so much for your reply. I am now considering the omtech 40w to do more serious laser etching onto cassettes. What do you think?
@BusterBeagle3D
Жыл бұрын
@@NikoNoxious Those 2 machines aren't even in the same ballpark, they are way different. While I don't have an Omtech I have only heard good things. One is a CO2 laser and one is a diode. They just work at a different laser wavelength but the OMT should be able to do what you want for sure. If you want something even faster you may think about a fiber laser as well. It's super fast and detailed and works well on plastic but might be more expensive and you are limited by the workable area.
@NikoNoxious
Жыл бұрын
@@BusterBeagle3D yes thank you!!
Can i laser QR codes on Lego Bricks?
@BusterBeagle3D
9 ай бұрын
You could. You might need to coat it with something like a dry erase marker, especially if it’s white. This laser isn’t the most powerful laser in the world and there are better options out there now but it could still do it.
It looks like it makes coffee. Does it also make coffee?
@BusterBeagle3D
Жыл бұрын
Sure. Just very, very, very, slowly.
It looks really good, but the ability to engrave at the angle like it does is super dangerous. Most other diode lasers have a tilt switch to prevent the laser firing if it’s anything other than facing straight down. It’s a really neat idea, but I worry about the liability of the manufacturer in case of injuries.
@BusterBeagle3D
2 жыл бұрын
To be fair all lasers are inherently dangerous. Any one needs to be respected. I also forgot to mention that it also has a bump sensor in it. If it detects that it fell over or has been bumped during use it shuts off.
Q
very slow