Cinda, thank you for the demonstration of the laser engraver. People should really see your video because some people are creating their own hand-held type of engraver that operates with an open source of electricity. The outcomes are sometimes not good. This is a safe way to engrave. 👍

@natureartgirl

Жыл бұрын

Yes, I would be really nervous about a do it yourself laser!😬🤣

Thanks for the demonstration of your laser engraver Cinda. Some nice work. Happy Trails

@natureartgirl

Жыл бұрын

Thanks Dan!😊👍

I got my laser Pecker 1 Pro today. I love it. I ordered the laser P 2 basic today. good vid.

@natureartgirl

Жыл бұрын

Good! I need to do a few more projects with mine. Been too busy lately 😂 Glad you are enjoying yours👍👍

I've been looking for something like this for my wood working projects, and from watching these videos it's my understanding that the difference between your pine cone and logo has to do with the outer rings of the tree are much lighter than the center. FYI, the outer layer is not harder, just more reflective. You could do the image at one setting, and your logo separately at another. Thank you for your video.

@natureartgirl

Жыл бұрын

Thanks for the info! That does make sense. I haven’t had as much time as I would like to experiment with this since we have been working long hours finishing the cabin. Looking forward to trying some more projects 😊

This vid makes me to save up for this little guy , I bought the first laser pecker and i having a blast with it but the speed of the l2 is where it’s at :)

@natureartgirl

Жыл бұрын

Yes, it is super fast! I have been having fun with it😊👍

Great job

@natureartgirl

11 ай бұрын

Thanks!

Awesome!

@natureartgirl

Жыл бұрын

Thanks!😊👍

Nice little machine

@natureartgirl

Жыл бұрын

Thanks Steve!

If you don’t use the rollers you can still use it. The rollers still work and won’t wonder off straight line engraving.

Thanks, demystified my new toy

@natureartgirl

4 ай бұрын

You are welcome! Have fun😊

Esse seu trabalho é Show 👏👏👏👏 um abraço Cinda...

@natureartgirl

Жыл бұрын

Thanks Mira😊💕🌷

Cinda - 3 cheers for a fine video. Your pacing and careful delivery really make the difference. I have the LP2 but am struggling to get any image stuff (jpeg) and can't see how to set up lettering in anything except in-line. I would like to use the LP2 to sign my turned bowls. I would really like to do the engraving in a circle on the bottom of the bowls. Looked to me like you might have been using an IPhone. Is that correct? Can you suggest someplace that I could find directions on importing graphics? Also, do the graphics have to be in BMP format? Pretty disappointed with the "directions" supplied with the tool. What I got doesn't address anything beyond the most basics start. Thank you very much!!!!!

@natureartgirl

Жыл бұрын

Hi Tom, I am far from an expert on this. This was my first attempts at using the LP2. Yes I was using an iPhone. The graphics were done first on my computer and then I just sent them to my iPhone by Bluetooth. They were in just a normal JPEG format, nothing fancy. If you are wanting your actual signature, I don’t know why you couldn’t just sign your name on a white piece of paper and take a photo with your phone. You could draw a circle on another piece underneath for a guide. You might have to use your phone’s photo editing app to increase the contrast and to get the background completely white. I always try the engraving first on a scrap to make sure you have the size and everything right. I don’t know if this will help!😊👍

@tomjpt

Жыл бұрын

@@natureartgirl Thanks Cinda. Your insights are helpful. I'm going to work (harder? more? better?) on getting images into my phone library.

Hi Lance! This is a wonderful tool, I recommend it to everyone. I've also seen it on many woodworking channels👍. I still have a real Mühlviertler joke up my sleeve where I'm at home. Do you want to see it Best regards from Hans and Cheers 🍻🇦🇹.

@natureartgirl

Жыл бұрын

Yes, we have been having a lot of fun with it! Going to try some more projects when things slow down a bit😊👍🍺🍺

@johannperaus6890

Жыл бұрын

@@natureartgirl Alright Lance, let's get started. You certainly know the calculation 3-5+2=0. But how do you explain that to a student who isn't very good at math? This is how we do it. If 3 people are on the tram and 5 people get off, what has to happen? The answer is quite simply Lance. 2 people have to get on the tram again so that nobody is in it anymore 👌. And please don't go down to the basement to laugh. Keep telling it and I promise you, everyone will be dying of laughter. Best regards from Hans and Cheers 🍻🍻🍻.

@natureartgirl

Жыл бұрын

🤣🤣🤣🤣I think you have had five beers😂😂😂🍺🍺🍺🍺🍺

Cool

@natureartgirl

Жыл бұрын

Thanks LaRue!😊

I’m trying to engrave a tag for my pup. How do I center it without looking at the laser ? 😭

@natureartgirl

Жыл бұрын

Are you using the shield that comes with it? You can use the preview mode to see the engraved area. Or, For something small like a dog tag you could use a square piece of wood underneath first. Engrave that, but don’t move it, or mark the spot with tape. Then put your dog tag on top, where the writing lines up where you want it. Then engrave your tag. I am by no means an expert at this though. So there may be a better way😊

Did you do the slate in gray scale?

@natureartgirl

Жыл бұрын

No, but you probably could. I used one slate as a test piece and tried a few different settings to see what I liked. 😊👍

How smoky is it? I’d like to take it markets and do on the spot engraving.

@natureartgirl

9 ай бұрын

It does put off quite a bit of smoke if you are doing large things like signs. It may be ok for outdoor shows. You would probably want to check with show management first, some shows I have done have fire code restrictions that won’t even let you burn a candle. But you could still have samples and take orders. 😊

Watch out Lance. Cinda may laser number you .😊 O the pain. good job Cinda, that's one handy gadget. Not much good if one doesn't have a iPhone or ipad or computer.??

@natureartgirl

Жыл бұрын

It works with any smart phone. But yes you do need some way to input your design into it. 😊👍

I'm new to this so I'm confused about the settings for different projects. Like wood coasters

@natureartgirl

11 ай бұрын

Wood can vary a lot, so I started with the settings recommended on the app and then adjusted it as needed. I usually make a few test pieces and when I get one I like, write the settings on that item and save it so you have it for the next batch. If you look at the piece before you move it, you can do a second engraving to make it deeper if it needs it. Hope this helps 😊

@Tom-jf4vg

11 ай бұрын

What settings do you use to cut wood ?

@natureartgirl

11 ай бұрын

I haven’t cut wood with it yet, only engraving.

Have you tried engraving a painted canvas?

@natureartgirl

Жыл бұрын

No, I haven’t had time to get too crazy with it yet. When we get the cabin done I will have more time to experiment 😊👍

Mine quit working in less than 6 months with about 30 engravings, hard to get customer support

@natureartgirl

Жыл бұрын

Sorry to hear that! Let me know how it goes.

👏🏻👍😁😊🙋‍♂️

@natureartgirl

Жыл бұрын

😊👍

14:44 ładne paznokcie

@natureartgirl

Жыл бұрын

🤣🤣🤣that’s what happens when you go directly from peeling logs for a log cabin to doing a video😊👍

@howgrassgo713

Жыл бұрын

@@natureartgirl wiem, żartuję, też czasem takie mam ;-)